ART USB Phono Plus Bedienungsanleitung

ART Empfänger USB Phono Plus

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ART USB Phono Plus (10 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 30 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/10
USB Phono Plus
Audiophile Computer Interface
Project Series
USER’S MANUAL
IMPORTANT SAFETY INSTRUCTION – READ FIRST
This symbol, whenever it appears, This symbol, wherever it appears, alerts you
alerts you to the presence of uninsulated to important operating and maintenance
dangerous voltage inside the enclosure-voltage instructions in the accompanying literature.
that may be sucient to constitute a risk of shock. Please read the manual.
Read instructions:
Retain these safety and operating instructions for future reference. Heed all warnings printed here and on the
equipment. Follow the operating instructions printed in this user manual.
Do not open:
There are no user serviceable parts inside. Refer any service work to qualied technical personnel only.
Power sources:
Connect the units power supply to mains power only of the type described in this user manual or marked on
the power supply.
Power supply:
Use the power supply with sealed mains plug appropriate for your local mains supply as provided with the
equipment. If the provided supply does not t into your outlet consult your service agent. Route the power cord
so that it is not likely to be walked on, stretched or pinched by items placed upon or against it.
Grounding:
Do not defeat the grounding and polarization means of the power supply.
Moisture:
To reduce the risk of re or electrical shock do not expose the unit to moisture or use in damp or wet condi-
tions. Do not place container of liquid on unit.
Heat:
Do not locate the unit close to excessive heat or direct sunlight, as this could cause a re hazard. Locate the
unit away from any equipment, which produces heat such as: power supplies, power ampliers and heaters.
Environment:
Protect from excessive dirt, dust, heat, and vibration when operating and storing. Avoid tobacco ash, drink
spillage and smoke, especially that associated with smoke machines.
Handling:
Protect the controls from damage during transit. Use adequate padding if you need to ship the unit. To avoid
injury to yourself or damage to the equipment, take care when lifting, moving, or carrying the unit.
Servicing:
Unplug power immediately if equipment is exposed to moisture, the power supply becomes damaged during a
lightning storm or if smoke odor or noise is noted. Refer servicing to qualied technical personnel only.
Installation:
Install the unit in accordance with the instructions printed in the user manual.
3
CONNECTIONS
The connections are RCA-type jacks and are used to connect your turntable, Preamp Phono/Line In
tape, CD, MP3 player, or other analog stereo audio device to the USB Phono Plus Project Serie
Project Serie
Project Serie
Project Serie Project Series
s
s
ss.
The terminal connection on the rear is used to connect the separate ground wire from your Ground
turntable to reduce hum. (This connection is unnecessary for digital output turntables).
The connections are RCA-type jacks that are always connected to the analog input Preamp Line Out
preamp signal for source monitoring or to allow use as a stand-alone phono preamp.
The RCA-type connection is a digital input that overrides the and analog S/PDIF In To USB Opto In
preamp signal connections whenever there is a valid digital signal present that is in S/PDIF format.
This digital signal input is routed to the your computer USB interface for S/PDIF to USB connectivity
only. You cannot connect S/PDIF to analog or analog to S/PDIF with this product. Note:
The and connections provide for Optical digital connections OPTO In To USB OPTO Out From USB
direct to your computer via USB. When there is valid TOSLINK digital signal at the connec-OPTO In
tion it overrides the analog preamp signal connection to the USB interface.
The 1/8-inch Headphone jack on the front is stereo unbalanced and can accommo- Monitor Output
date a wide variety of headphone models. Maximum output level is +6dBu (1.4Vrms).
The USB bus from your computer normally powers the USB Phono Plus
Pro
Pro
Pro
ProProject
ject
ject
ject ject Series
Series
Series
SeriesSeries. A power
connector on the rear allows you to use an optional external power source to reduce the power drawn
from your computer. The USB Phono Plus
Pro
Pro
Pro
ProProject
ject
ject
ject ject Series
Series
Series
SeriesSeries operates from any external power
source that provides 150mA or more @ 7 Volts to 12 Volts DC (either polarity at the tip will work with
our unit) or 9 Volts to 12 Volts AC.
The connector is USB 2.0 compliant and should be used to connect directly to USB To Computer
one of the USB connections on your computer. This connection also powers the USB circuitry inside
the USB Phono Plus Project
Project
Project
ProjectProject Series
Series
Series
Series Series and will power the whole product if no other power source is
available. This connection looks like a standard “USB Audio CODEC” to your computer, and your
computer then controls the sample rate.

Produktspezifikationen

Marke: ART
Kategorie: Empfänger
Modell: USB Phono Plus

Brauchst du Hilfe?

Wenn Sie Hilfe mit ART USB Phono Plus benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Empfänger ART

ART

ART USB Phono Plus Bedienungsanleitung

4 Januar 2024
ART

ART MyMonitor II Bedienungsanleitung

28 Dezember 2023
ART

ART HeadAMP V Bedienungsanleitung

6 Dezember 2023

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-

Dimavery

Dimavery BA-30 Bedienungsanleitung

18 April 2024
TOA

TOA Trantec S5.3 Bedienungsanleitung

17 April 2024
Pioneer

Pioneer DMH-WT3800NEX Bedienungsanleitung

17 April 2024
NAD

NAD C 3050 LE Bedienungsanleitung

16 April 2024
Devialet

Devialet Expert 220 Pro Bedienungsanleitung

16 April 2024
Cambridge

Cambridge Azur 851A Bedienungsanleitung

16 April 2024
AudioControl

AudioControl LC-6.1200 Bedienungsanleitung

16 April 2024
RCF

RCF FVM 9844 Bedienungsanleitung

16 April 2024
Zehnder

Zehnder ZX 67 Bedienungsanleitung

15 April 2024
Marantz

Marantz PM6007 Bedienungsanleitung

15 April 2024