ART Precision Phono Pre Bedienungsanleitung

ART Empfänger Precision Phono Pre

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ART Precision Phono Pre (11 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/11
Precision Phono Pre
Low Noise Precision Phono Preamp
Project Series
User’s Manual
1
IMPORTANT SAFETY INSTRUCTION – READ FIRST
This symbol, whenever it appears alerts you to the
presence of uninsulated dangerous voltage inside the
enclosure-voltage that may be sufficient to constitute a risk
of shock.
This symbol, whenever it appears, alerts you to important
operating and maintenance instructions in the
accompanying literature. Please read the manual.
Read Instructions: Retain safety and operating instructions for
future reference. Heed all warnings printed here and on the
equipment. Follow the operating instructions printed in this user
manual.
Do not open: There are no user serviceable parts inside. Refer
any service work to qualified technical personnel only.
Environment: Protect from excessive dirt, dust, heat, and
vibration when operating and storing. Avoid tobacco ash, drink
spillage and smoke, especially that associated with smoke
machines.
Handling: Protect the controls from damage during transit. Use
adequate padding if you need to ship the unit. To avoid injury to
yourself or damage to the equipment, take care when lifting,
moving or carrying the unit.
Servicing: Refer servicing to qualified technical personnel.
Installation: Install the unit in accordance with the instructions
printed in the user manual.
2
INTRODUCTION
Thank you for purchasing Applied Research and Technology’s
Precision Phono Preamp, a high quality standalone phono
preamp. The PPP interfaces Moving Coil (MC) and Moving
Magnet (MM) cartridges to a wide variety of audio systems. An
Extraordinarily low noise amplifier allows connection to MC
cartridges without picking up noise or distortion that transform-
ers can exhibit.
Analog inputs are switchable between Moving Magnet and
Moving Coil. The unit changes both the gain
and the cartridge loading to suit the selected cartridge. A rear
switch allows you to adjust MC cartridge loading between 100
Ohms and 25 Ohms. A low cut filter removes rumble and low
frequency feedback while leaving the audio pristine.
The front gain trim control with the signal present/clip LED
allows you to optimize the output for a wide range of cartridges.
The Precision Phono PS is powered off an external 9 VAC
supply to provide low noise/ high headroom operation.
Upgrade your system in one quick and easy step.
The built-in low noise phono preamp circuitry is highly accurate
and precisely conforms to the RIAA standard. The line output
jacks are low impedance and can work with any audio system.
Housed in an aluminum-anodized case. If you need to amplify
and EQ your vinyl records to interface with an audio work-
station, home audio system, or monitor system, the DJ PRE II
gives you flawless audio reproduction in a rugged and reliable
package.


Produktspezifikationen

Marke: ART
Kategorie: Empfänger
Modell: Precision Phono Pre

Brauchst du Hilfe?

Wenn Sie Hilfe mit ART Precision Phono Pre benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Empfänger ART

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-