ART PDB Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ART PDB (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 24 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
ART PDB Passive Direct Box
Thank you for purchasing the ART PDB Passive Direct Box. This rock solid, roadworthy DI Box allows
for the connection of the outputs of electronic musical instruments (or other audio sources) to the
balanced inputs of mixer consoles.
The ART PDB also allows connection of a music source to an instrument amplifier while
simultaneously patching it to a mixer via the PDB DI Box.
Features:
1. Switchable Input Attenuation
* 0dB for electric guitar and bass pickups
* -20dB for line lev el signals, such as keyboards and cd players
* -40dB for speaker feeds
2. 50k Ohm Instrument Input
The PDB matches the signal level and impedance with unity gain, without any
adverse effects on the source signal.
3. 50k Ohm Parallel Link jack
The 50k ohm parallel link jack output enables you to connect the output from the
PDB directly to power amplifiers without a separate preamplifier.
4. 600 Ohm XLR Output Jack
The 600 ohm XLR output jack enables you to send a balanced signal to a mixing
console.
5. Switchable Ground Lift
A switchable ground lift is provided to help eliminate hum caused by ground
loops.
Applications:
1. Electric guitar and bass pick up output signals
The high impedance signal from a guitar or bass guitar pickup is translated by the PDB into
a low impedance balanced signal required by mixing consoles.
Suggested setting – set the input attenuation to 0dB.
2. Keyboards and line level signals
The PDB automatically balances and matches the line level outputs of modern electronic
keyboards. If you are using a multiple keyboard setup and your keyboards are all plugged
into a single instrument amplifier, the PDB can be used to replace individual direct boxes.
Simply send the output of the instrument amplifier to the PDB and then to the console
(instead of a separate DI box for each keyboard).
Suggested setting – set the input attenuation to -20dB (line level) or –40dB (amp level).
3. DJ console output signals
DJ mixers often supply only an unbalanced –10dB signal. The PDB converts this signal to a
balanced line level signal before it reaches the console, while providing a convenient
method of connector transition with the capability to run long cables.
Suggested setting – set the input attenuation to 0dB or –20dB.
4. Speaker level signals
The PDB’s ability to accept speaker level inputs from a power amplifier’s output allows
post-amplifier, post eq and effects signals to be fed directly to the console. In this manner,
a particular effect or amplifier sound can be sent directly to the mix.
Suggested setting – – set the input attenuation to 40dB (amp level).
Service:
The following information is provided in the unlikely event that your unit requires service.
1) Be sure that the unit is the cause of the problem. Check to make sure the unit has power
supplied, all cables are connected correctly, and the cables themselves are in working
condition.
2) If you find the unit to be at fault, write down a complete description of the problem,
including how and when the problem occurs. Please write down a description of your
complete setup before calling Customer Service.
3) Call the factory (716- -436 2720) for a Return Authorization (RA) number.
4) Pack the unit in its original carton or a reasonable substitute. The packing box is not
recommended as a shipping carton. Put the packaged unit in another box for shipping.
Print the RA number clearly on the outside of the shipping box. Print your return shipping
address on the outside of the box.
5) Include with your unit: a return shipping address (we cannot ship to a P.O. Box), a copy
of your purchase receipt, a daytime phone number, and a description of the problem.
6) Ship only your unit and its power supply (keep your manual!) to:
APPLIED RESEARCH AND TECHNOLOGY
215 TREMONT STREET
ROCHESTER, NEW YORK 14608
ATTN: REPAIR DEPARTMENT
RA# ____________________
7) Contact our Customer Service department at (716) 436-2720 for your Return
Authorization number or questions regarding technical assistance or repairs. Customer
Service hours are 9:00 AM to 5:30 PM Eastern Time, Monday through Friday. (The PDB
warranty period is one year.)
APPLIED RESEARCH & TECHNOLOGY
215 TREMONT STREET
ROCHESTER, NEW YORK 14608 USA
(716) 436- -2720 (716) 436 3942 – Fax
www.artproaudio.com
E-mail: cserve@artproaudio.com


Produktspezifikationen

Marke: ART
Kategorie: Nicht kategorisiert
Modell: PDB

Brauchst du Hilfe?

Wenn Sie Hilfe mit ART PDB benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert ART

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-