ArmyTek Wizard C2 Pro Bedienungsanleitung

ArmyTek Beleuchtung Wizard C2 Pro

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ArmyTek Wizard C2 Pro (33 Seiten) in der Kategorie Beleuchtung. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/33
WIZARD C2 PRO
MULTI FLASHLIGHT
2 ENG USER MANUAL
6 GER BENUTZERANLEITUNG
10 FRA MANUEL D’UTILISATEUR
14 RUS РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ
18 FIN YTTÖOHJE
22 SWE ANVÄNDARMANUAL
26 NOR BRUKSANVISNING
30 POL INSTRUKCJA OBSŁUGI REV_00-0001
2 ENG USER MANUAL WIZARD C2 PRO REV_00-0001
Specifications
Headlamp: simple one-hand operation, reliable headmount for
running. Solid body without long wires, weak rubber connectors and
unnecessary boxes. The flashlight is easily installed, removed and 180°
rotatable in the mount. Quick-release rubber ring provides additional
fixation
Every Day Carry light: compact design, convenient side button,
special matt anti-abrasive finish without rough knurling. Strong built-in
magnet and robust steel clip. Constant light without flickering
Bicycle light: made from aircraft-grade aluminium, durable quick-re-
lease mount in the set
Powerful electronics provides impressive light output up to 2500
lumens and record 200 days in Firefly mode
Total protection from water, dirt and dust — flashlight continues to
work even at 10 meters depth
Convenient wide beam of the TIR-optics, protected from scratches by
tempered glass with anti-reflective coating
Innovative technology allows to use any 18650 batteries and
provides full protection against short circuit even in case of contact
between magnetic connector and metal objects
Active real-time temperature control to prevent overheating above
58 °C and warning indication of low battery level
Multicolor temperature and battery state indication for 25 years helps
to find the flashlight in the dark
Robust and water resistant magnetic connector
WIZARD C2 PRO NICHIA
Close to sunlight LED lighting with high CRI >90 and color temperatu-
re of 4500K for near to perfect natural color reproduction
Incredibly powerful for the given color tint light output of 1400 lu-
mens
ENG USER MANUAL
Thank you for choosing the products of Armytek Optoelectronics Inc.
Please read this manual carefully before using the flashlight.
Model Wizard C2 Pro (White) Wizard C2 Pro Nichia (Warm)
LED/Optics Cree XHP50.2/TIR Nichia NV4L144/TIR
Brightness stabilization type FULL (constant light)
Light output 2500 lm 1400 lm
Peak beam intensity 4260 cd 2350 cd
Hotspot : Spill 70°:120°
Beam distance 131 m 97 m
Modes, light output (OTF
lumens) and runtimes
(measured with 18650 Li-Ion
3500 mAh battery until the
light output drops to 10% of
the initial value)
Turbo3 2500 lm/2 h 40 min (650 lm after 30 sec)
Turbo2 1750 lm/2 h 45 min (650 lm after 2 min) 1400 lm/2 h 50 min (460 lm after 1 min)
Turbo1 870 lm/2 h 50 min (650 lm after 9 min) 770 lm/1 h 50 min
Main3 370 lm/5 h 15 min 335 lm/4 h 10 min
Main2 160 lm/12 h 15 min 140 lm/10 h
Main1 45 lm/43 h 27 lm/50 h
Firefly3 6 lm/12 d 5 lm/8 d
Firefly2 1.5 lm/40 d 1.2 lm/40 d
Firefly1 0.15 lm/200 d 0.1 lm/200 d
Strobe3 2500 lm/10 Hz/5 h 45 min (650 lm after 100 sec) 1400 lm/10 Hz/5 h 40 min (460 lm after 2 min)
Strobe2 2500 lm/1Hz/12 h (650 lm after 9 min) 1400 lm/1 Hz/14 h (460 lm after 5 min)
Strobe1 160 lm/1 Hz /55 h 140 lm/1 Hz/50 h
Power source 1x18650 Li-Ion
Length/Body diameter/Head diameter 112 mm/20.4 mm/33 mm
Weight without/with battery 65 g/115 g
Submersion and Impact resistance IP68, 10 m for 2 h. Height up to 10 m
* Light output for flashlights with Warm light is about 7% less, beam distance is about 3% less.
** All the above specifications are test results based on ANSI/NEMA FL1-2009 Standard. The tests are performed using the battery included in the set.
The data may vary due to environment, heat dissipation and other factors.
3WIZARD C2 PRO USER MANUAL ENG
REV_00-0001
Set description
Flashlight, 18650 Li-Ion battery, magnetic USB charger, clip, head-
mount, bicycle mount ABM-01, 2 spare O-rings, user manual.
The flashlight and accessories can inconsiderably dier from the
pictures in the manual. The producer reserves the right to change
the package at his own discretion without modifying this manual.
Specifications are subject to change without notice.
Initial Service
TO SET/REPLACE BATTERY
1. Unscrew the tailcap.
2. Place the battery with the positive contact (+) facing the head of the
flashlight.
3. Adjust the tailcap and tighten it as far as it can go.
The flashlight is ready for operation.
HOW TO CONNECT THE MAGNETIC CHARGER
Unscrew the tailcap for 1/4 of a circle and adjust the magnetic charger
to the tailcap.
CHARGER COLOR INDICATION
Charger not plugged in:
Green — device is in waiting mode.
Charger plugged in:
Green blinking — evaluation of battery voltage.
Red blinking — unscrew the tailcap for 1/4 for charging.
Orange blinking — USB power source voltage is too low for correct
continuation of charging or bad contact between charger and battery.
Try cleaning the tailcap and the threads of the flashlight parts or use a
dierent power source.
Red — charging is going on, charging current is 1A.
Orange — USB power source voltage is too low, charging current has
been reduced by half.
Green — charging is finished.
Operation
Before use: Tighten the tailcap.
GENERAL TYPE
Modes: Firefly1, Firefly2, Main modes, Turbo1, Turbo2 or Turbo3 (last
used in Advanced, Turbo2 by default).
In OFF state
1 click: To turn on the last used mode.
Press and hold: To start cycling through Firefly modes. Release to
select. Keeping button pressed will start cycling through Main modes.
In ON state
1 click: To turn o the flashlight.
Press and hold: To start cycling through Main modes from any mode. In
Firefly1 cycling through Main modes starts after cycling through Firefly
modes. Release to select.
2 clicks: To turn on Turbo mode from any mode. The second double click
brings back last used mode.
ADVANCED TYPE
To switch between types of operation unscrew the tailcap to 1/4 while
the flashlight is o, press the button and tighten the tailcap while
keeping the button pressed.
Sections of modes:
[1] – Firefly modes, [2] – Main modes, [3] – Turbo modes,
[4] – Strobe modes
In OFF state:
1 click: To turn on the last used mode.
Press and hold: To turn on Firefly1 mode [Section 1]. Keeping button
pressed will start cycling through modes: Firefly1 - Firefly2 - Firefly3 -
Main1 - Main2 - Main3 - Turbo1.


Produktspezifikationen

Marke: ArmyTek
Kategorie: Beleuchtung
Modell: Wizard C2 Pro

Brauchst du Hilfe?

Wenn Sie Hilfe mit ArmyTek Wizard C2 Pro benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Beleuchtung ArmyTek

Bedienungsanleitung Beleuchtung

Neueste Bedienungsanleitung für -Kategorien-