Argoclima Fanny Bedienungsanleitung

Argoclima Ventilator Fanny

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Argoclima Fanny (6 Seiten) in der Kategorie Ventilator. Dieser Bedienungsanleitung war für 47 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/6

V 2/13

OPERATING INSTRUCTIONS

Read the instructions carefully before operating the appliance or carrying out maintenance operations.

Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or damage.

Keep these instructions in a safe place for future reference.

.

DESK AND STAND FAN

V 2/13

GENERAL SAFETY INFORMATION

 Use this fan only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire, electric

shock or injury to people.

 Ensure that the mains power complies with the voltage specified on the fan ’s data plate (220-240V~/50Hz).

 This product is not a toy. Children should be adequately supervised to ensure that they do not play with the appliance.

 This appliance is not suitable for use by people (including children) with reduced physical, sensory or mental abilities, or

without the necessary experience and knowledge, unless they have been adequately supervised and instructed

concerning use of the appliance by a person responsible for their safety.

 Do not restrict the air inlet and outlet grilles.

 Disconnect the mains power when the appliance is not used or for cleaning operations.

 Do not place anything on the appliance, use the appliance to dry clothing.

 Avoid placing fingers or foreign objects in the air inlet/outlet grilles, as this may lead to electric shock or fire and may

damage the appliance.

 To avoid the risk of fire, do not block the grilles or tamper with them in any way while the fan operates.

 Do not use the appliance if the cord or plug are damaged. If the power supply cord is damaged, it must be replaced by the

manufacturer, dealer or a similarly qualified person so as to avoid any safety risks.

 Do not operate the appliance if it has fallen from a height or has suffered damage in any way. Contact qualified technical

personnel to examine the appliance or perform any electrical or mechanical repairs.

 The most common cause of overheating is the build-up of dust in the appliance. Remove dust deposits by unplugging the

appliance and cleaning the air outlets and grilles with the aid of a vacuum cleaner.

 Do not use abrasive detergents for cleaning this appliance. Clean the appliance with the aid of a damp (not wet) cloth

rinsed in hot soapy water. Always remove the plug from the mains socket before cleaning.

 To disconnect the fan, push the switch to OFF and remove the plug from the socket. Pull on the plug only. Avoid pulling

on the cord when disconnecting the fan.

 Do not place any objects on the cord and do not bend it.

 It is not advisable to use extension cords, as these may overheat and cause the risk of fire. Do not use a single extension

cord to operate multiple appliances.

 Do not immerse the cord, plug or any other element of the appliance in water or other liquids.

 Do not touch the plug with wet hands.

 Do not place the fan above or near another heat source.

 Do not connect the appliance to the mains power before it has been properly assembled and positioned.

 Do not run the cord under carpets. Do not cover the cord with blankets, carpets or similar materials. Place the cord far

away from busy areas or where it cannot be accidentally pulled-out.

 Do not position the fan below a socket outlet.

 Do not operate the appliance outdoors.

WARNING: DO NOT DEPEND ON THE ON/OFF BUTTON SWITCH AS THE SOLE MEANS OF

DISCONNECTING POWER. WHEN SERVICING OR MOVING THE FAN, ALWAYS UNPLUG THE

POWER CORD.

 A fan has hot and arcing or sparkling parts inside. It must not be used in potentially dangerous locations such

as flammable, explosive, chemical-laden or wet atmosphere.

 Do not place the fan on soft surfaces, like a bed, where openings may become blocked. Always place the

fan on a stable, flat, level surface when oper the overturning. Locate ating, to avoid the chance of

the power cord so the fan or other objects are not resting on it.

 Always unplug the fan when not in use.

 In order to avoid accidents turn unit off if unattended.

 In the event of any problems (abnormal noise or a strange smell) switch off the appliance immediately, do not

attempt to repair it and take it to your local after sales service.

V 2/13

DESK FAN - DESCRIPTION OF PARTS AND ASSEMBLY INSTRUCTIONS

Open the box and remove the parts of the appliance.

Connect the base (11) to the body of the appliance (10) using the screws supplied (12).

Insert the rear grill (6) on the motor shaft (7) in the proper position (hanlde upward).

Screw the nut (5) in order to fasten the rear grill firmly.

Set the blade (4) on the motor shaft (7).

Tighten the nut (2) on the motor shaft (caution - counterclockwise direction).

With the aid of the ring (3) join front and rear grill and tighten the screw on the ring.

The appliance does not need to be installed.

Position the fan on the table.

STAND FAN - DESCRIPTION OF PARTS AND ASSEMBLY INSTRUCTIONS

Open the box and remove the parts of the appliance.

Connect the base (15) to the outer rod of the appliance (14) using the screws supplied (16).

Unscrew the height adjustment ring (13) and pull out the inner rod(12).

Join the upper part (motor housing 8 + neck 9 + control box 10) and tighten the screw (11) firmly.

1. Front grille

2. Nut

3. Ring

4. Blade

5. Nut

6. Rear grille

7. Motor shaft

8. Motor housing

9. Neck

10. Control box and body

11. Base

12. Screws

13. Remote control

1. Front grille

2. Nut

3. Ring

4. Blade

5. Nut

6. Rear grille

7. Motor shaft

8. Motor housing

9. Neck

10. Control box and body

11. Screw

12. Inner rod

13. Height adjustment ring

14. Outer rod

15. Base

16. Screws

17. Remote control

Produktspezifikationen

Marke:	Argoclima
Kategorie:	Ventilator
Modell:	Fanny
Timer:	Ja
Breite:	365 mm
Tiefe:	360 mm
Gewicht:	3000 g
Produktfarbe:	Schwarz
Höhe:	750 mm
Platzierung:	Tisch
Fernbedienung enthalten:	Ja
Stromverbrauch (Standardbetrieb):	48 W
Geräuschpegel:	55 dB
Energiebedarf:	230V, 50Hz
Anzahl Geschwindigkeiten:	3
Maximale Timer-Zeit:	7.5 h
Luftstrom:	75 m³/h
Lüfterdurchmesser:	400 mm
Anzahl der Motoren:	1