Arcam cd 192 Bedienungsanleitung

Arcam CD-Spieler cd 192

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Arcam cd 192 (9 Seiten) in der Kategorie CD-Spieler. Dieser Bedienungsanleitung war für 27 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/9

CD192

HANDBOOK/MANUEL/HANDBUCH/HANDLEIDING

English

Français

Deutsch

Arcam CD192 Compact Disc player

Lecteur de Disque Compact Arcam CD192

Arcam CD192 Compact Disc-Spieler

Arcam CD192 CD-speler

Nederlands

CD192

E-2

English

CD192

E-3

English

Safety guidelines

CAUTION: To reduce the risk of electric shock, do not

remove cover (or back). No user serviceable parts

inside. Refer servicing to qualied service personnel.

WARNING: To reduce the risk of re or electric shock,

do not expose this apparatus to rain or moisture.

The lightning ash with an arrowhead symbol within an

equilateral triangle is intended to alert the user to the

presence of uninsulated ‘dangerous voltage’ within the

product’s enclosure that may be of sufcient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the product.

CAUTION: In Canada and the USA, to prevent electric

shock, match the wide blade of the plug to the wide

slot in the socket and insert the plug fully into the

socket.

Important safety instructions

This product is designed and manufactured to meet

strict quality and safety standards. However, you should

be aware of the following installation and operation

precautions:

1. Take heed of warnings and instructions

You should read all the safety and operating instructions

before operating this appliance. Retain this handbook

for future reference and adhere to all warnings in the

handbook or on the appliance.

2. Water and moisture

The presence of electricity near water can be dangerous.

Do not use the appliance near water – for example next to

a bathtub, washbowl, kitchen sink, in a wet basement or

near a swimming pool, etc.

3. Object or liquid entry

Take care that objects do not fall and liquids are not

spilled into the enclosure through any openings. Liquid

lled objects such as vases should not be placed on the

equipment.

4. Ventilation

Do not place the equipment on a bed, sofa, rug or similar

soft surface, or in an enclosed bookcase or cabinet, since

ventilation may be impeded. We recommend a minimum

distance of 50mm (2 inches) around the sides and top of

the appliance to provide adequate ventilation.

5. Heat

Locate the appliance away from naked ames or heat

producing equipment such as radiators, stoves or other

appliances (including other ampliers) that produce heat.

6. Climate

The appliance has been designed for use in moderate

climates.

7. Racks and stands

Only use a rack or stand that is recommended for use with

audio equipment. If the equipment is on a portable rack it

should be moved with great care, to avoid overturning the

combination.

8. Cleaning

Unplug the unit from the mains supply before cleaning.

The case should normally only require a wipe with a soft,

damp, lint-free cloth. Do not use paint thinners or other

chemical solvents for cleaning.

We do not advise the use of furniture cleaning sprays or

polishes as they can cause indelible white marks if the unit

is subsequently wiped with a damp cloth.

9. Power sources

Only connect the appliance to a power supply of the type

described in the operating instructions or as marked on the

appliance.

10. Power-cord protection

Power supply cords should be routed so that they are not

likely to be walked on or pinched by items placed upon

or against them, paying particular attention to cords and

plugs, and the point where they exit from the appliance.

11. Grounding

Ensure that the grounding means of the appliance is not

defeated.

12. Power lines

Locate any outdoor antenna/aerial away from power lines.

13. Non-use periods

If the unit has a standby function, a small amount of

current will continue to ow into the equipment in this

mode. Unplug the power cord of the appliance from the

outlet if left unused for a long period of time.

14. Abnormal smell

If an abnormal smell or smoke is detected from the

appliance, turn the power off immediately and unplug the

unit from the wall outlet. Contact your dealer immediately.

15. Servicing

You should not attempt to service the appliance beyond that

described in this handbook. All other servicing should be

referred to qualied service personnel.

16. Damage requiring service

The appliance should be serviced by qualied service

personnel when:

A. the power-supply cord or the plug has been damaged,

B. objects have fallen, or liquid has spilled into the

appliance, or

C. the appliance has been exposed to rain, or

D. the appliance does not appear to operate normally or

exhibits a marked change in performance, or

E. the appliance has been dropped or the enclosure

damaged.

Safety compliance

This product has been designed to meet the IEC 60065

international electrical safety standard.

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

ATTENTION

CAUTION

RISK OF ELECTRIC

SHOCK DO NOT OPEN

CD192
E-2
English
CD192
E-3
English
Using this handbook
This handbook has been designed to give you all the 
information you need to install, connect, set up and use 
the Arcam CD192 compact disc player. The CR-314 remote 
control handset supplied with this equipment is also 
described.
Safety
Safety guidelines are set out on the inside front cover of 
this handbook. 
Many of these items are common sense precautions, but for 
your own safety, and to ensure that you do not damage the 
unit, we strongly recommend that you read them.
Digital to Analogue conversion
The CD192 incorporates the latest audio up-sampling 
technology to convert the 44.1kHz data from the CD up 
to 192kHz in 24-bit precision using the Analog Devices 
AD1896 sample rate converter.
The 192kHz audio data is converted into the analogue 
domain using four Wolfson Micro WM8740 24-bit stereo 
DACs. Left and right output channels are made using 
two stereo DAC chips per channel, both operating in dual 
mono conguration per channel. The resulting four mono 
signals (two for each channel) are summed together to help 
improve dynamic range, linearity and therefore distortion.
Due to the higher sample rates, the digital lters roll off 
less aggressively than for standard DACs, and the analogue 
lters have a wider bandwidth resulting in less phase 
distortion, particularly for the higher frequencies.
Contents
Safety guidelines................................................E-2
Using this handbook ...........................................E-3
Installation ........................................................E-4
Positioning the unit .......................................E-4
Connecting to other equipment.......................E-4
Connecting to a power supply.........................E-4
Using your CD player ..........................................E-5
CDs with text ...............................................E-5
Using the CR-314 remote control..........................E-6
Remote-control codes .........................................E-7
Technical specication.........................................E-8
Guarantee .........................................................E-9
Worldwide Guarantee ....................................E-9
On line registration .......................................E-9