Approx APPPCI100V2 Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Approx APPPCI100V2 (8 Seiten) in der Kategorie Netwerkkaart/adapter. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
appPCI100V2
VERSION2.1
1. CARACTERÍSTICAS
Características Principales
Compatible con los estándares Ethernet IEEE802.3 100Base-TX y
10Base-T Industry
• 32-bit PCI local bus master architecture
• Velocidad 10/100Mbps Auto-sensing
• Plug–and-Play para configuración automática
• Indicadores LED (Enlace, Actividad)
• Bajo consumo de energía
Software soportado
• Soporta Windows® 95/ 98/ ME/ 2000/ XP/ Vista/ 7; Linux
Especificaciones técnicas
• Conector: RJ-45
• Estándares: IEEE802.3 10Base-T;IEEE802.3 100Base-TX
• Velocidad de transmisión: 10Mbps o 20Mbps; 100Mbps o 200Mbps
• IRQ Line: Asignada por el sistema
• I/O Address: Asignada por el sistema
• Consumo: 1.8W (Max)
2. INSTALACIÓN
Instalación de Hardware:
1. Apague su ordenador y abra la carcasa de su ordenador.
2. Elija una ranura PCI libre. Retire la cubierta de la ranura, conservando
los tornillos.
3. Inserte cuidadosamente la tarjeta de red APPPCI100V2 en la ranura
elegida. Presione la parte superior hasta ajustarla. Asegúrese de que la
tarjeta ha sido insertada completamente en la ranura PCI y sujete la
tarjeta de red a su sistema con los tornillos que retiró anteriormente.
Vuelva a colocar la carcasa del ordenador.
4. Enchufe y sujete un puerto RJ45 del cable de red en la tarjeta de red
APPPCI100V2.
5. Conecte todos los adaptadores de energía y des accesorios.
Instalación del Software:
Use el driver incluido en el CD de este producto.
1. FEATURES
Key features
Complies with the Ethernet IEEE802.3 100Base-TX and 10Base-T
Industry standard
• 32-bit PCI local bus master architecture
• Auto-sensing 10/100Mbps speed
• Plug–and-Play for automatic configuration
• LED indicators (Link, Activity)
• Low power consumption
Software support
• Supports Windows® 95/ 98/ ME/ 2000/ XP/ Vista/ 7; Linux
Technical specification
• Connector: RJ-45
• Standard: IEEE802.3 10Base-T; IEEE802.3 100Base-TX
• Transmission Rate: 10Mbps or 20Mbps, 100Mbps or 200Mbps
• IRQ Line: Assigned by system
• I/O Address: Assigned by system
• Power consumption: 1.8W (Max)
2. INSTALLATION
Hardware Installation:
1. Turn off the computer, open the cover of the computer case.
2. Select a free PCI slot. Remove the cover from the slot. Keep the screw.
You will be using it in the next step.
3. Carefully slide the APPPCI100V2 LAN card into the chosen slot. Press
firmly on the top of the modem to seal it. Fasten the LAN card to your
system with screw you removed in the previous step. Replace the
computer’s cover.
4. Plug and Fasten one RJ45 port of the network cable into the
APPPCI100V2 LAN card.
5. Connect all the power adapter and some other accessories.
Software Installation:
Use the driver from the CD included in this product.

Produktspezifikationen

Marke: Approx
Kategorie: Netwerkkaart/adapter
Modell: APPPCI100V2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Approx APPPCI100V2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Netwerkkaart/adapter Approx

Bedienungsanleitung Netwerkkaart/adapter

Neueste Bedienungsanleitung für -Kategorien-