APC SRTGRK1 Bedienungsanleitung

APC UPS SRTGRK1

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für APC SRTGRK1 (15 Seiten) in der Kategorie UPS. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/15
Important Safety Instructions
Read the instructions carefully and look at the equipment to become familiar with the device before trying to install,
operate, service or maintain it. The following special messages may appear throughout this document or on the
equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a procedure.
The addition of this symbol to either a Danger” or “Warningproduct safety label indicates
that an electrical hazard exists which will result in personal injury if the instructions are
not followed.
This is the safety alert symbol. It is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible injury or
death.
DANGER
DANGER
indicates a hazardous situation which, if not avoided, death or serious injury. will result in
WARNING
WARNING
indicates a hazardous situation which, if not avoided, death or serious injury. could result in
CAUTION
CAUTION
indicates a hazardous situation which, if not avoided, minor or moderate injury. could result in
NOTICE
NOTICE
is used to address practices not related to physical injury.
Product Handling Guidelines
Installation Guide Smart-UPS
RT
SRTGRK1 Tower to Rack-Mount Conversion
2 Smart-UPSTM RT SRTGRK1 Tower to Rack-Mount Conversion
Package Contents
Inspect the contents upon receipt. Notify the carrier and dealer if the unit is damaged.
One Rail Kit with instructions and hardware for
installing
rails in a rack.
Installation manual
x1
Packing list
x1
M5x12 Phillips flat head
screw for securing the rail to
the pillar
x12
SRTGRK1 is compatible with all variants of the following models:
SRTG5KXLI
SRTG5KXLT
SRTG6KXLI
SRTG8KXLI
SRTG10KXLI
Power module of SRTG15KXLI
Power module of SRTG20KXLI
SRTG192XLBP3
SRTG192XLBP4
Smart-UPSTM RT SRTGRK1 Tower to Rack-Mount Conversion 3
Tower to Rack-Mount Conversion of UPS
UPS model may differ in appearance from those depicted in these graphics.
CAUTION
RISK O
RISK O
RISK O
RISK ORISK OF FALLING O
F FALLING O
F FALLING O
F FALLING OF FALLING OBJECTS
BJECTS
BJECTS
BJECTS BJECTS
The equipment is heavy.
Always practice safe lifting techniques adequate for the weight of the equipment.
Remove the battery modules before installing the UPS.
Use the battery module handle to carefully slide the battery module in or out of the unit.
Do not use the battery module handle to lift or carry the battery module.
Place the UPS on the table to remove the mounting base.
Always install the UPS at the bottom of the rack.
Always install the XLBP below the UPS in the rack.
Failure
Failure
Failure
Failure Failure to f
to f
to f
to fto follow these
ollow these
ollow these
ollow theseollow these instructi
instructi
instructi
instructi instructions ca
ons ca
ons ca
ons caons can result i
n result i
n result i
n result in result in equip
n equip
n equip
n equipn equipment da
ment da
ment da
ment dament damage
mage
mage
mage mage and mino
and mino
and mino
and minoand minor or mod
r or mod
r or mod
r or modr or moderate injury
erate injury
erate injury
erate injuryerate injury.
.
.
. .
the stabilizer bracket
from UPS model.
Remove the front bezel from UPS model.


Produktspezifikationen

Marke: APC
Kategorie: UPS
Modell: SRTGRK1

Brauchst du Hilfe?

Wenn Sie Hilfe mit APC SRTGRK1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung UPS APC

Bedienungsanleitung UPS

Neueste Bedienungsanleitung für -Kategorien-