APC Smart-UPS SMT1000C Bedienungsanleitung

APC Unterbrechungsfreies Stromversorgungssystem Smart-UPS SMT1000C

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für APC Smart-UPS SMT1000C (6 Seiten) in der Kategorie Unterbrechungsfreies Stromversorgungssystem. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/6

Smart-UPS™ Installation Guide

750/1000/1500/2200/3000 VA 120/230 Vac

500 VA 100 Vac Tower

Important Safety Messages

SAVE THESE INSTUCTIONS - This manuals contains important instructions that should be followed during

installation and maintenance of the Power Management Unit, Service Bypass Unit and batteries.

Read the instructions carefully and look at the equipment to become familiar with the device before trying to

install, operate, service or maintain it. The following special messages may appear throughout this document

or on the equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a

procedure.

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey

all safety messages that follow this symbol to avoid possible injury or death.

Safety and General Information

Inspect the package contents upon receipt. Notify the carrier and dealer if there is any damage.

Read the Safety Guide supplied with this unit before installing the UPS.

• Adhere to all national and local electrical codes.

• This UPS is intended for indoor use only.

• Do not operate this UPS in direct sunlight, in contact with fluids, or where there is excessive dust or

humidity.

• Be sure the air vents on the UPS are not blocked. Allow adequate space for proper ventilation.

• The battery typically lasts for two to five years. Environmental factors impact battery life. Elevated

ambient temperatures, poor quality utility power, and frequent short duration discharges will shorten

battery life.

• Connect the UPS power cable directly to a wall outlet. Do not use surge protectors or extension cords.

• The equipment is heavy. Always practice safe lifting techniques adequate for the weight of the

equipment.

• The model and serial numbers are located on a small, rear panel label. For some models, an additional

label is located on the chassis under the front bezel.

• Always recycle used batteries.

• Recycle the package materials or save them for reuse.

CAUTION

CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate

injury.

NOTICE

NOTICE is used to address practices not related to physical injury.

Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac 500 VA 100 Vac Tower2

FCC warning

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the

FCC Rules. These limits are intended to provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Inventory

All models 120/230 Vac models

(1) Documentation CD (1)

120/230 Vac models

(1) PowerChute software CD (1) (1)

230 Vac models

(2) 2200/3000 VA models

(1)

2200/3000 VA models

(1)

2200/3000 VA models

(1)

Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac 500 VA 100 Vac Tower 3

Rear panel features 500 VA to 1500 VA models

500 VA 100 Vac

750 VA 100/120 Vac 750 VA 230 Vac 1000/1500 VA 100 Vac

1000/1500 VA 120 Vac 1000/1500 VA 230 Vac

USB port

 RJ45 connector - serial UPS monitoring port

Chassis ground screw

SmartSlot for optional NMC accessory card

Circuit breaker/Overload protection

UPS input

Outlets

Internal or external battery connector

su0326b

su0327b

G R O U P 1

su0325c

G R O U P 1

su0328c

Produktspezifikationen

Marke:	APC
Kategorie:	Unterbrechungsfreies Stromversorgungssystem
Modell:	Smart-UPS SMT1000C
Display-Typ:	LCD
Akustische Signale:	Ja
USB Anschluss:	Ja
Breite:	171 mm
Tiefe:	439 mm
Gewicht:	20100 g
Produktfarbe:	Schwarz
Akkuladezeit:	3 h
Akku-/Batterietechnologie:	Plombierte Bleisäure (VRLA)
Höhe:	219 mm
Energieschutzeigenschaften:	Kurzschluß
Stecker:	NEMA 5-15P
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 95 %
Verpackungsbreite:	330 mm
Verpackungstiefe:	590 mm
Verpackungshöhe:	330 mm
Paketgewicht:	22640 g
Zertifizierung:	REACH
Warentarifnummer (HS):	85078000
Kabellänge:	1.83 m
Reaktionszeit:	10 ms
LED-Anzeigen:	Status
Temperaturbereich bei Lagerung:	-15 - 45 °C
Luftfeuchtigkeit bei Lagerung:	0 - 95 %
Geräuschpegel:	41 dB
Anzahl unterstützter Akkus/Batterien:	1
Batterielebensdauer (max.):	5 Jahr(e)
Formfaktor:	Tower
Web-basiertes Management:	Ja
Serielle Schnittstelle:	Ja
Ausgangsleistung:	700 W
Nachhaltigkeitszertifikate:	RoHS,ENERGY STAR
Eingangsfrequenz:	50/60 Hz
Höhe bei Betrieb:	0 - 3000 m
Anzahl der AC-Ausgänge:	8 AC-Ausgänge
USV-Topologie:	Line-Interaktiv
Eingangs-Betriebsspannung (min):	75 V
Eingangs-Betriebsspannung (max):	154 V
Ausgangskapazität:	1 kVA
Ausgangs-Betriebsspannung (min):	110 V
Ausgangs-Betriebsspannung (max):	127 V
Überspannung Einschätzung:	680 J
Automatische Spannungsregulierung:	Ja
AC-Steckertypen:	NEMA 5-15R
Wellenform:	Sine
EMI/RFI Lautstärkefilter:	Ja
Akustische Alarm-Modi:	Alarm when on battery,Low battery alarm,Overload alarm
Hot-Swap-Batterie:	Ja
Höhe bei Lagerung:	0 - 15000 m
Kaltstart:	Ja
Auto-Neustart:	Ja
Automatischer Batterietest:	Ja
SmartSlot:	Ja