APC Smart-UPS RC 2000VA Bedienungsanleitung

APC UPS Smart-UPS RC 2000VA

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für APC Smart-UPS RC 2000VA (21 Seiten) in der Kategorie UPS. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/21
990-3485B 01/2009
Smart-UPS® RC
Uninterruptible Power Supply
Tower/Rack-Mount 4U
XLI/XLICH/XLI-CC
SRC1000/2000/3000 VA
220/230/240 Vac
English
User Manual Smart-UPS RC XLI/XLICH/XLI-CC 1000/2000/3000 VA 220/230/240 Vac Tower/Rack-Mount 4U 3
Introduction
Overview
The American Power Conversion (APC
®) Smart-UPS® RC is a high performance uninterruptible power
supply (UPS) that provides protection for electronic equipment from utility power blackouts, brownouts,
sags and surges. The UPS protects electronic equipment from small utility fluctuations and large
disturbances by providing continuous on-line double converted power. The UPS provides battery backup
until utility power returns to safe levels or the batteries are fully discharged.
Unpack package contents
Read the Safety Guide before installing the UPS.
Inspect UPS upon receipt. Notify carrier and dealer if there is damage.
Packaging is recyclable; save it for reuse or dispose of it properly.
Check UPS package contents:
NOTE: The model and serial numbers are located on a small, rear panel label. For some models, an
additional label is located on the chassis under the front bezel.
Accessories
Install accessories prior to connecting power to the UPS.
Refer to the APC Web site, www.apc.com for available accessories.
Optional accessories
• External battery pack (XLBP)
• 4-post rail kit
• UPS
• Front bezel
• Front display panel
• Input power cord
• Serial cable
• Stabilizer/rack-mount brackets
• Hardware supplied listed in table below
• Literature kit containing:
– Product documentation
– Smart-UPS® RC User Manuals CD
– PowerChute® Business Edition Utility CD
– Safety information
– Warranty information
8
2
2
su0211b
Hardware supplied
Rack-mount configuration:
Pan head screws for securing rack-mount brackets to unit
Tower configuration:
Flat head screws for securing stabilizer brackets unit
Rack-mount configuration brackets
Tower configuration stabilizer brackets
User Manual Smart-UPS RC XLI/XLICH/XLI-CC 1000/2000/3000 VA 220/230/240 Vac Tower/Rack-Mount 4U 4
Specifications
Environmental Specifications
Physical Specifications
Temperature
Operating 0° to 40° C (32° to 104° F)
This unit is intended for indoor use
only. Select a location sturdy enough to
handle the weight.
Do not operate UPS where there is
excessive dust or temperature or
humidity are outside specified limits.
Be sure air vents on UPS are not
blocked. Allow adequate space for
proper ventilation.
Environmental factors impact battery
life. High temperatures, poor utility
power, and frequent, short duration
discharges will shorten battery life.
Storage -15° to 45° C (5° to 113° F)
charge UPS battery every six months
Maximum
Elevation Operating 3,000 m (10,000 ft)
Storage 15,000 m (50,000 ft)
Humidity 0 to 95% relative humidity, non-condensing
Weight - Refer to Safety Guide supplied with this unit for lifting guidelines.
UPS 1000/2000 VA 3000 VA
UPS with batteries 26 kg (57 lbs) 34 kg (75 lbs)
UPS without batteries 13 kg (29 lbs) 14 kg (31 lbs)
Each battery module 13 kg (29 lbs) 10 kg (22 lbs)
1000/2000 VA models: The 96 V battery string is a single module.
3000 VA models: The 96 V battery string consists of two 48 V battery modules.
Maximum number of XLBPs supported by Smart-UPS RC 10
Combined weights of UPS and all
XLBPs installed in a rack must not
exceed rack weight limits.
Dimensions
Length x Width x Height: 46 cm (18 in) x 43 cm (17 in) x 18 cm (7 in)


Produktspezifikationen

Marke: APC
Kategorie: UPS
Modell: Smart-UPS RC 2000VA

Brauchst du Hilfe?

Wenn Sie Hilfe mit APC Smart-UPS RC 2000VA benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung UPS APC

Bedienungsanleitung UPS

Neueste Bedienungsanleitung für -Kategorien-