APC Smart-UPS Modular Ultra SRYL15K15RMXLT Bedienungsanleitung

APC Unterbrechungsfreies Stromversorgungssystem Smart-UPS Modular Ultra SRYL15K15RMXLT

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für APC Smart-UPS Modular Ultra SRYL15K15RMXLT (88 Seiten) in der Kategorie Unterbrechungsfreies Stromversorgungssystem. Dieser Bedienungsanleitung war für 37 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/88
Smart-UPS™ Modular Ultra
Uninterruptible Power Supply
User Manual
SRYL5K15RMXLT SRYL5K20RMXLT
SRYL10K15RMXLT SRYL10K20RMXLT
SRYL15K15RMXLT SRYL15K20RMXLT
SRYL20K20RMXLT
EN 990-6492A
06/2023
Legal Information
The Schneider Electric brand and any trademarks of Schneider Electric SE and its
subsidiaries referred to in this guide are the property of Schneider Electric SE or its
subsidiaries. All other brands may be trademarks of their respective owners.
This guide and its content are protected under applicable copyright laws and furnished for
informational use only. No part of this guide may be reproduced or transmitted in any form or
by any means (electronic, mechanical, photocopying, recording, or otherwise), for any
purpose, without the prior written permission of Schneider Electric.
Schneider Electric does not grant any right or license for commercial use of the guide or its
content, except for a non-exclusive and personal license to consult it on an "as is" basis.
Schneider Electric products and equipment should be installed, operated, serviced, and
maintained only by qualified personnel.
As standards, specifications, and designs change from time to time, information contained
in this guide may be subject to change without notice.
To the extent permitted by applicable law, no responsibility or liability is assumed by
Schneider Electric and its subsidiaries for any errors or omissions in the informational
content of this material or consequences arising out of or resulting from the use of the
information contained herein.
APC Smart-UPS Modular Ultra Uninterruptible Power Supply
EN 990-6492A iii
Contents
Important Safety Instructions ....................................................... 5
Product Handling Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
FCC Class A Radio Frequency Warning . . . . . . . . . . . . . . . . . . . . . . . . . 6
Product Overview ........................................................................ 7
System Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Replacement Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Specifications............................................................................... 8
Environmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Physical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Wiring (Hardwire). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Package contents ...................................................................... 11
UPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
XBP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Installation.................................................................................. 12
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Install Frames in a 4 Post Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Install Frames in a 2 Post Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Install Power Module(s) and Battery Module(s) . . . . . . . . . . . . . . . . . . . 24
Remove Blanking Panels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Remove Power Module and Battery Module . . . . . . . . . . . . . . . . . . . . . 25
Rear Panel Features.................................................................. 27
UPS Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Battery Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Front Panel Features ................................................................. 28
UPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Hardwiring.................................................................................. 29
Terminal Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Connect Battery Frame.............................................................. 31
Connect a single battery frame to UPS . . . . . . . . . . . . . . . . . . . . . . . . . 31
Connect multiple battery frames to UPS . . . . . . . . . . . . . . . . . . . . . . . . 32
Battery Cable Extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Operation ................................................................................... 35
Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Set the UPS to Manual Bypass Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 38
APC Smart-UPS Modular Ultra Uninterruptible Power Supply
iv EN 990-6492A
One Line Diagram Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Start Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Turn on / Turn off the UPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
LCD Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
UPS Menu Overview ................................................................. 48
Configuration ............................................................................. 51
Startup configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
General settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Control ....................................................................................... 67
UPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Login to LCD Display ................................................................. 70
Update Firmware ....................................................................... 72
Through USB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Through NMC web page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Download Log Files ................................................................... 74
Through USB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Through NMC web page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Emergency Power Off................................................................ 75
Network Management Interface................................................. 77
Smart Battery Management ....................................................... 79
Troubleshooting ......................................................................... 81
Transport ................................................................................... 84
Service....................................................................................... 84
Limited Factory Warranty........................................................... 85
APC Worldwide Customer Support ........................................... 86
Important Safety Instructions APC Smart-UPS Modular Ultra Uninterruptible Power Supply
5EN 990-6492A
Important Safety Instructions
SAVE THESE INSTRUCTIONS - This manual contains important instructions that
should be followed during installation and maintenance of
APC Smart-UPS Modular Ultra series of equipment and batteries.
Read the Safety Guide supplied with the equipment to become familiar
with the safety requirements before trying to install or operate the UPS.
Read the user documentation to become familiar with the equipment
before trying to install or operate it.
The following special messages may appear throughout this document or on the
equipment to warn of potential hazards or to call attention to information that clarifies
or simplifies a procedure.
The addition of this symbol either to a “Danger” or “Warning” safety label
indicates that an electrical hazard exists that will result in personal injury if
the instructions are not followed.
This is the safety alert symbol. It is used to alert you to potential personal
injury hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.
Product Handling Guidelines
Inspect the package contents upon receipt. Notify the carrier and dealer if there
is any damage.
DANGER
DANGER indicates a hazardous situation which, if not avoided, will result in death
or serious injury.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.
NOTICE
NOTICE is used to address practices not related to physical injury.
<18 kg
<40 lb
18-32 kg
40-70 lb
32-55 kg
70-120 lb
>55 kg
>120 lb
Important Safety InstructionsAPC Smart-UPS Modular Ultra Uninterruptible Power Supply
EN 990-6492A6
FCC Class A Radio Frequency Warning
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at their own expense.
SpecificationsAPC Smart-UPS Modular Ultra Uninterruptible Power Supply
EN 990-6492A8
Specifications
Environmental
Physical
* Net weight includes the net weights of frame(s), battery module(s) and
power module(s).
** Weight with packaging includes the packaged weights of the frames only.
Battery
Temperature Operating 0 to 40 °C (32 to 104 °F)
Storage With batteries: -15 to 45 °C (5 to 113 °F)
Without batteries: -30 to 70 °C (-22 to 158 °F)
Maximum Elevation Operating 0 - 3,000 m (0 - 10,000 ft)
Storage 0 - 15,000 m (50,000 ft)
Humidity 0% to 95% relative humidity, non-condensing
International Protection Code IP20
NOTE:
Charge the Battery Modules (BM) immediately upon receipt or during first installation.
Charge the Battery Modules (BM) at least once in twelve (12) months for storage temperatures up to 35 °C (95 °F)
or every six (6) months for storage temperatures above 35 °C (95 °F).
It is recommend to store the BM below 30 °C (86 °F).
Environmental factors impact battery life. Elevated ambient temperatures, high humidity, and frequent short
duration discharges caused due to poor quality mains power will shorten battery life.
Rating 5 kVA / 5 kW 10 kVA / 10 kW
Redundancy N+0 N+1 N+0 N+1
Dimensions without
packaging (H x W x D)
390 x 440 x 700 mm
(15.35 x 17.32 x 27.56 in)
Dimensions with packaging
(H x W x D)
695 x 600 x 1000 mm
(27.36 x 23.62 x 39.37 in)
Net Weight* 78.50 kg
(173.06 lb)
97.90 kg
(215.83 lb)
97.90 kg
(215.83 lb)
117.30 kg
(258.60 lb)
Weight with packaging** 79.50 kg (175.27 lb)
Rating 15 kVA / 15 kW 20 kVA / 20 kW
Redundancy N+0 N+1 N+0 N+1
Dimensions without
packaging (H x W x D)
390 x 440 x 700 mm
(15.35 x 17.32 x 27.56 in)
520 x 440 x 740 mm
(20.47 x 17.32 x 29.13 in)
Dimensions with packaging
(H x W x D)
695 x 600 x 1000 mm
(27.36 x 23.62 x 39.37 in)
UPS: 695 x 600 x 1000 mm (27.36 x 23.62 x 39.37 in)
Battery Frame: 300 x 600 x 1000 mm
(11.81 x 23.62 x 39.37 in)
Net Weight* 117.30 kg
(258.60 lb)
156.30 kg
(344.58 lb)
156.30 kg
(344.58 lb)
175.70 kg
(387.35 lb)
Weight with packaging** 79.50 kg
(175.27 lb)
UPS Frame: 79.5 kg (175.27 lb)
Battery Frame: 27.3 kg (60.19 lb)
Battery type Lithium-ion
Battery module rating 180 V 2.47 Ah; 444.6 Wh
Specifications APC Smart-UPS Modular Ultra Uninterruptible Power Supply
9EN 990-6492A
Electrical
1 With no load applied on L1-L2
2 With no load applied on L1-N or L2-N
CAUTION
RISK OF FIRE
Connect the UPS only to a circuit provided with recommended maximum branch
circuit over-current protection in accordance with the National Electrical Code,
ANSI/NFPA 70 and the Canadian Electrical Code, Part I, C22.1.
Failure to follow these instructions could result in equipment damage and
minor or moderate injury.
Model Branch current circuit
breaker rating
SRYL5K15RMXLT
100 ASRYL10K15RMXLT
SRYL15K15RMXLT
SRYL5K20RMXLT
125 A
SRYL10K20RMXLT
SRYL15K20RMXLT
SRYL20K20RMXLT
Model Output Voltage Setting Max. Load Power
SRYL5K15RMXLT
SRYL5K20RMXLT
120/208 VAC
L1-N 1
2.5 kW / 2.5 kVA
L2-N 1
L1-L2 2 4.3 kW / 4.3 kVA
120/240 VAC
L1-N 1
2.5 kW / 2.5 kVA
L2-N 1
L1-L2 2 5 kW / 5 kVA
SRYL10K15RMXLT
SRYL10K20RMXLT
120/208 VAC
L1-N 1
5 kW / 5 kVA
L2-N 1
L1-L2 2 8.6 kW / 8.6 kVA
120/240 VAC
L1-N 1
5 kW / 5 kVA
L2-N 1
L1-L2 2 10 kW / 10 kVA
SRYL15K15RMXLT
SRYL15K20RMXLT
120/208 VAC
L1-N 1
7.5 kW / 7.5 kVA
L2-N 1
L1-L2 2 13 kW / 13 kVA
120/240 VAC
L1-N 1
7.5 kW / 7.5 kVA
L2-N 1
L1-L2 2 15 kW / 15 kVA
SRYL20K20RMXLT
120/208 VAC
L1-N 1
10 kW / 10 kVA
L2-N 1
L1-L2 2 17.30 kW / 17.30 kVA
120/240 VAC
L1-N 1
10 kW / 10 kVA
L2-N 1
L1-L2 2 20 kW / 20 kVA
SpecificationsAPC Smart-UPS Modular Ultra Uninterruptible Power Supply
EN 990-6492A10
Input
Output
Wiring (Hardwire)
Input
Output
Input Frequency 40 to 70 Hz (Auto Sensing)
Nominal Input
Voltage
120/208 VAC (120°)
120/240 VAC (180°)
Output
Frequency
50/60 Hz ± 3 Hz (Auto Sense)
50/60 Hz ± 0.1 Hz (User Selectable)
50/60 Hz ± 3 Hz (User Selectable)
Nominal Output
Voltage
120/208 VAC (120°)
120/240 VAC (180°)
Model Input
Wire Gauge Tightening
Torque
Connection
SRYL5K15RMXLT
SRYL10K15RMXLT
SRYL15K15RMXLT
#3 AWG 40 in-lb
(4.5 N-m)
External Circuit
Breaker
4 Wire
(2Ø + N + )
SRYL5K20RMXLT
SRYL10K20RMXLT
SRYL15K20RMXLT
SRYL20K20RMXLT
#1 AWG
Model Output
Wire Gauge Torque Connection
SRYL5K15RMXLT
SRYL10K15RMXLT
SRYL15K15RMXLT
#3 AWG 40 in-lb
(4.5 N-m)
Distribution
Panel
4 Wire
(2Ø + N + )
SRYL5K20RMXLT
SRYL10K20RMXLT
SRYL15K20RMXLT
SRYL20K20RMXLT
#1 AWG
InstallationAPC Smart-UPS Modular Ultra Uninterruptible Power Supply
EN 990-6492A12
Installation
Unpacking
UPS Frame
CAUTION
RISK OF DROPPED OR FALLING EQUIPMENT
The equipment is heavy. Follow guidelines given in “Product Handling Guidelines
on page 5.
Do not use the UPS as a safety disconnect.
Failure to follow these instructions could result in equipment damage and
minor or moderate injury.
Cut open the shipping straps with a
general-purpose knife.
Lift the carton off the pallet.
Remove the UPS railkit, Litkit and
store them safely.
Remove the top packing cushions.
Lift the UPS frame off the pallet.
sy10252a
sy1025
5a
Installation APC Smart-UPS Modular Ultra Uninterruptible Power Supply
13EN 990-6492A
Battery Frame
Install Frames in a 4 Post Rack
Models with UPS frame only
Open the carton. Remove the railkit, Litkit and store
them safely.
Remove the top packing cushions. Lift the battery frame out from the
carton.
CAUTION
RISK OF DROPPED OR FALLING EQUIPMENT
The equipment is heavy. Follow guidelines given in “Product Handling Guidelines”
on page 5 for lifting and sliding the frame into the rack.
Install power modules and battery modules only after the frame is installed in the
rack.
Place the rack in the location where the equipment will be used.
Do not move the rack once the frame is secured.
Secure the frame in the rack befor odules and battery e installing power m
modules.
Do not use the UPS as a safety disconnect.
Failure to follow these instructions could result in equipment damage and
minor or moderate injury.
Install the UPS rails (supplied) in
the rack.
Be sure to align the bottom
mounting holes on the rails to
hole #1 (bottom hole) on the rack.
sy10258a
sy10259a
sy10260
a
sy1
026a
1
sy10265a
1
1
InstallationAPC Smart-UPS Modular Ultra Uninterruptible Power Supply
EN 990-6492A14
Secure the rails to the rack
with 16 flat head screws
and conical washers
(supplied)
(NOTE: Tightening torque:
24 to 26 lb-in).
Utilize holes 1, 3, 4, and 5
on the front of the rails and
all the 4 holes on the rear of
the rails.
Install cage nuts in the rack.
The number indicated in the
illustration is the position number
counted from the bottom.
Install the UPS frame in
the rack.
sy1026
6a
16x
sy1 0267a
26
24
21
15
11
sy10269a
InstallationAPC Smart-UPS Modular Ultra Uninterruptible Power Supply
EN 990-6492A16
Install up to 3 nos. (on each
rail) panhead screws with
SEMs washer (supplied) to
lock the rails in position.
NOTE: Install the panhead
screws with SEMs at those
locations where the tapped
hole is visible through the
slot in the rail.
Install UPS rail (supplied) in the
rack.
Be sure to align the bottom
mounting hole on the rails to
hole #10 (from bottom) on the
rack.
Secure the UPS rail to
the rack with 16 flat head
screws and conical
washers (supplied).
NOTE: Tightening
torque: 24 to 26 lb-in.
Utilize holes 1, 3, 4,and
5 on the front of the rails
and all the 4 holes on the
rear of the rails.
sy10a
379
sy10272a
10
10
sy102
73a
16x
Installation APC Smart-UPS Modular Ultra Uninterruptible Power Supply
17EN 990-6492A
Install cage nuts in the rack.
The number indicated in the
illustration is the position number
counted from the bottom.
Install the battery frame in
the rack.
Secure the battery
frame to the rack.
Use 6 nos.
ornamental screws
supplied.
NOTE:
Tightening torque:
24 to 26 lb-in.
sy102 a74
8
20
24
30
33
35
sy10
27
5a
sy10276a
6x
InstallationAPC Smart-UPS Modular Ultra Uninterruptible Power Supply
EN 990-6492A18
Install the UPS frame in
the rack.
Secure the UPS frame to
the rack. Use 14 nos.
ornamental screws
supplied.
NOTE: Tightening torque:
24 to 26 lb-in.
s
y10277a
sy10278a
1 x4
InstallationAPC Smart-UPS Modular Ultra Uninterruptible Power Supply
EN 990-6492A20
Models with both UPS and battery frames
Install the UPS frame in
the rack.
Secure the UPS frame to the left and
right UPS frame lower brackets using
4 nos. ornamental screws (supplied).
NOTE:
Tightening torque: 24 to 26 lb-in.
Secure the UPS frame upper brackets to
the rack using 6 nos. screws (supplied).
NOTE: Tightening torque: 24 to 26 lb-in.
Anchor the 2 post rack to the floor.
sy
10405a
sy
10
406a
6x
sy
10407a
sy103
94a
4x
Installation APC Smart-UPS Modular Ultra Uninterruptible Power Supply
21EN 990-6492A
Install the battery frame bracket in the rack.
Be sure to align the bottom mounting holes
on the bracket to hole #4 (from the bottom)
on the rack.
Secure the battery frame brackets to the
rack using 8 screws (2 on the front mounting
tab and 2 on the rear mounting tab in each
bracket).
NOTE: Tightening torque: 24 to 26 lb-in.
Install the battery frame in the rack.
Secure the battery frame to the bracket
using 4 nos. ornamental screws
(supplied).
NOTE:
Tightening torque: 24 to 26 lb-in.
#4
sy10395a
8x
sy10396a
sy10397a
4x
sy1
0398
a
InstallationAPC Smart-UPS Modular Ultra Uninterruptible Power Supply
EN 990-6492A22
Install both the UPS lower brackets in the
rack and secure them to the 10 nos. screws
provided.
NOTE: Tightening torque: 24 to 26 lb-in.
Install both the left and right UPS top
brackets in the rack and secure them to
the 4 nos. ornamental screws provided.
NOTE: Tightening torque: 24 to 26 lb-in.
Install the UPS frame
in the rack.
Secure the UPS frame to the left and
right UPS lower brackets using 4 nos.
ornamental screws supplied.
NOTE:
Tightening torque: 24 to 26 lb-in.
10x
sy103
99a
4x
sy10400a
S
y10401a
4x
s
y1040a
2
Installation APC Smart-UPS Modular Ultra Uninterruptible Power Supply
23EN 990-6492A
Secure the UPS frame upper brackets to
the rack using 6 nos. screws (supplied).
NOTE: Tightening torque: 24 to 26 lb-in.
6x
s
y10403a
InstallationAPC Smart-UPS Modular Ultra Uninterruptible Power Supply
EN 990-6492A24
Install Power Module(s) and Battery Module(s)
NOTE: The installation procedure is the same for both the power module and the
battery module. A power module is used for illustrating the instructions.
Power modules and battery modules can be installed in any of the 6 slots in the UPS
frame.
Only battery modules can be installed in the battery frame.
Remove the blanking panels, if required, in the UPS frame or the battery frame to
install the modules. Refer “Remove Blanking Panels” on page 25 for details.
CAUTION
RISK OF DROPPED OR FALLING EQUIPMENT
The equipment is heavy. The approximate weight of the power module is 9.4 kg
(20.72 lb) and that of the battery module is 10 kg (22 lb).
Follow guidelines given in “Product Handling Guidelines” on page 5.
Be sure to hold the module with both hands during installation.
Do not use the finger hold to lift or carry the module.
Install Power Module(s) in the UPS frame only.
Do not use the UPS as a safety disconnect.
Failure to follow these instructions could result in equipment damage and
minor or moderate injury.
a. Orient the module so
the thumbscrew is
towards the middle of
the frame.
b. Slide in the module
until the latch
engages.
Hand tighten the thumbscrew to
enable the module and lock the latch.
sy10
279a
sy
10
2a
80
Installation APC Smart-UPS Modular Ultra Uninterruptible Power Supply
25EN 990-6492A
Remove Blanking Panels
Remove Power Module and Battery Module
NOTE: The removal procedure is the same for both power module and battery
module. A power module is used for illustrating the instructions except in step .
NOTE: Before removing a power module, be sure that the connected load is well
within the capacity of the remaining power modules. If not, disconnect some of the
non-essential loads before removing a power module.
Insert a slotted screwdriver
into the slot on the blanking
panel.
Push the screw driver gently
into the slot till a resistance is
felt, and pull out the blanking
panel using the finger grip.
CAUTION
RISK OF DROPPED OR FALLING EQUIPMENT
The equipment is heavy. The approximate weight of the power module is 9.4 kg
(20.72 lb) and that of the battery module is 10 kg (22 lb).
Follow guidelines given in “Product Handling Guidelines” on page 5.
Be sure to hold the module with both hands during removal.
Do not use the finger hold to lift or carry the module.
Do not use the UPS as a safety disconnect.
Failure to follow these instructions could result in equipment damage and
minor or moderate injury.
Turn off the battery module by
setting the BATTERY ON/OFF
switch to OFF.
NOTE: This step is applicable
only for battery module.
Loosen the thumbscrew to disable
the module and unlock the latch.
sy10283a
sy10347 a
sy1021 6a


Produktspezifikationen

Marke: APC
Kategorie: Unterbrechungsfreies Stromversorgungssystem
Modell: Smart-UPS Modular Ultra SRYL15K15RMXLT

Brauchst du Hilfe?

Wenn Sie Hilfe mit APC Smart-UPS Modular Ultra SRYL15K15RMXLT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Unterbrechungsfreies Stromversorgungssystem APC

Bedienungsanleitung Unterbrechungsfreies Stromversorgungssystem

Neueste Bedienungsanleitung für -Kategorien-