APC RBC174 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für APC RBC174 (12 Seiten) in der Kategorie Unterbrechungsfreies Stromversorgungssystem. Dieser Bedienungsanleitung war für 48 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
Important Safety Instructions
Read the instructions carefully and look at the equipment to become familiar with the device before trying to install,
operate, service or maintain it. The following special messages may appear throughout this document or on the
equipment to warn of potential hazards or to call attention to information that claries or simplies a procedure.
The addition of this symbol to either a Danger or Warning safety label indicates that ” “
an electrical hazard exists which will result in personal injury if the instructions are not
followed.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Product Handling Guidelines
DANGER
DANGER indicates a hazardous situation which, if not avoided, death or serious injury.will result in
WARNING
WARNING indicates a hazardous situation which, if not avoided, death or serious injury.could result in
CAUTION
CAUTION
indicates a hazardous situation which, if not avoided,
could result in
minor or moderate injury.
NOTICE
NOTICE
is used to address practices not related to physical injury.
Installation Guide Smart-UPS RT
Replacement Battery Module APCRBC174
2 Smart-UPS RT APCRBC174
Safety and General Information
Adhere to all local and national electrical codes.
Always recycle used batteries.
For information on recycling used battery modules, refer to the Battery Disposal Information sheet included with
the replacement battery module.
Recycle the package materials or save them for reuse.
Before replacing batteries, remove conductive jewelry such as chains, wrist watches, and rings. High energy
through conductive materials could cause severe burns.
Do not dispose of battery batteries in a re. The batteries may explode. or
Do not open or mutilate batteries. Released electrolyte is harmful to the skin and eyes, and may be toxic.
Servicing of user replaceable batteries should to be performed or supervised by personnel knowledgeable about
batteries and required precautions.
A battery can present a risk of electric shock and burns by high short-circuit current.
Failed batteries can reach temperatures that exceed the burn thresholds for touchable surfaces.
Battery safety
CAUTION
RISK OF HYDROGEN SULPHIDE GAS AND EXCESSIVE SMOKE
Replace the battery at least every 5 years or at the end of its service life, whichever is earlier .
Replace the battery immediately when the UPS indicates battery replacement is necessary.
Replace batteries with the same number and type of batteries as originally installed in the equipment.
Replace the battery immediately when the UPS indicates a battery over-temperature condition, or when
there is evidence of electrolyte leakage. Power o the UPS, unplug it from the AC input, and disconnect
the batteries. Do not operate the UPS until the batteries have been replaced.
*Replace all battery modules (including the modules in External Battery Packs) which are older than
one year, when installing additional battery packs or replacing the battery module(s).
Failure to follow these instructions can result in minor or moderate injury and equipment damage.
* Contact APC by Schneider Electric Worldwide Customer Support to determine the age of the installed battery modules.
Smart-UPS RT APCRBC174 3
Replace Battery Modules
CAUTION
RISK OF FALLING OBJECTS
The equipment is heavy. Each battery module weighs kg (36.4 lb). 16.5
Always practice safe lifting techniques adequate for the weight of the equipment.
Adhere to all local and national electrical codes.
Use the battery module handle to slide the battery modules in or out of the UPS and external battery
pack(XLBP).
Do not use the handle to lift or carry the battery module.
Failure to follow these instructions can result in equipment damage and minor or moderate injury.
Note: The batteries will charge to 90% capacity in the rst 4 hours of operation on utility power. Do not expect full runtime
capability during this initial charge period.
UPS
XLBP
RBC
SRTG192XLBP3
APCRBC174
SRTG8KXLI
SRTG10KXLI
SRTG192XLBP4
Package Contents
Installation manual
x1
Packing list
x1


Produktspezifikationen

Marke: APC
Kategorie: Unterbrechungsfreies Stromversorgungssystem
Modell: RBC174

Brauchst du Hilfe?

Wenn Sie Hilfe mit APC RBC174 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Unterbrechungsfreies Stromversorgungssystem APC

Bedienungsanleitung Unterbrechungsfreies Stromversorgungssystem

Neueste Bedienungsanleitung für -Kategorien-