APC ACF301EM Bedienungsanleitung

APC Klimaanlage ACF301EM

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für APC ACF301EM (2 Seiten) in der Kategorie Klimaanlage. Dieser Bedienungsanleitung war für 34 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
Wall Mounting
Suspended Ceiling Mounting
Wiring Closet V
Wiring Closet V
Wiring Closet V
Wiring Closet VWiring Closet Ventilation Unit Installation and Operation Guide
entilation Unit Installation and Operation Guide
entilation Unit Installation and Operation Guide
entilation Unit Installation and Operation Guideentilation Unit Installation and Operation Guide
Entire contents copyright 2006 American Power Conversion Corporation. All rights reserved. Reproduction in whole or in part without permission is prohibited.
APC and e APC logo are regis ered tradema th t rk o n o v o p n o d p ys f Amer aic Po Cwer n e sir n Cor o ar tio . All ther t ar ema ks are e p or th r e tr of the r r spe tive owners.i e c 9 0- 8 4 , 0 / 0 69 2 3 -002 5 2 0
OR
Rear
Note: Drill rod included in hardware kit.
Outside Outside Outside Inside Inside
Note: Additionally, screw into the studs for optional
supplemental support (screws not included).
Inside and Outside
Inside Inside Inside and Outside*
*Optional
Inside
Hardwiring
Attention: All electrical hardwiring connections must be performed by a qualified electrician. Adhere to all local and national electrical codes.
Hardwiring is applicable to ceiling-mounted units only. Refer to Step 6 and 7 in Suspended Ceiling Mounting for instruction.
Operation and LEDs
Monitoring Cable Signals
Troubleshooting
Fan Replacement
Refer to applicable steps in Wall Mounting or Suspended Ceiling Mounting.
Specifications
Service
If the Wiring Closet Ventilation Unit requires service, do not return it to the dealer. Follow these steps:
1. Contact APC Customer Support through the APC Web site, www.apc.com.
• Note the model number and the serial number, both located in the front of the unit, and the date purchased. If you call APC Customer Support, a technician
will ask you to describe the problem and attempt to solve it over the phone. If this is not possible, the technician will issue a Returned Material Authorization
Number (RMA#).
• If the unit is under warranty, repairs are free.
• Procedures for servicing or returning products may vary internationally. Refer to the APC Web site for country specific instructions.
2. Pack the unit in its original packaging. If this is not available, refer to the APC Web site for information about obtaining a new set.
• Pack the unit properly to avoid damage in transit. Never use Styrofoam beads for packaging. Damage sustained in transit is not covered under warranty.
3. Mark the RMA# on the outside of the package.
4. Return the unit by insured, prepaid carrier to the address given to you by Customer Support.
Customer Support
Refer to the APC Web site, www.apc.com. Select the appropriate country from the country selection field. Select the Support tab at the top of this Web page.
After selecting a country, see www.apc.com/support/contact for e-mail and phone numbers available.
Compliance
cUL, FCC Part 15, CE, VCCI, CISPR 22, CISPR 24, AS/ANZI CISPR 22
Limited Warranty
American Power Conversion (APC) warrants its products to be free from defects in materials and workmanship for a period of two years from the date of
purchase. Its obligation under this warranty is limited to repairing or replacing, at its own sole option, any such defective products. To obtain service under
warranty you must obtain a Returned Material Authorization (RMA) number from customer support. Products must be returned with transportation charges
prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not apply to
equipment that has been damaged by accident, negligence, or misapplication or has been altered or modified in any way. This warranty applies only to the
original purchaser who must have properly registered the product within 10 days of purchase.
EXCEPT AS PROVIDED HEREIN, AMERICAN POWER CONVERSION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied
warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL APC BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, APC is not
liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third
parties, or otherwise.
*
Green/Yellow
Blue
Brown
Monitoring
Cable
LEDs
II O I
I
O
II
- SLOW SPEED
- OFF
- HIGH SPEED
Wire Color Name Signal Function For connection to AP9619 For connection to
AP9340 or AP9350
Polarity
Green Common Not applicable Zone 1 NC* or Zone 2 NC* User 1 Negative (-) or
User 2 Negative (-)
Not applicable
White with brown Contact 1 Fan off Zone 1 COM** User 1 Positive (+) Opens when fan is off
Brown Contact 2 Fan fail Zone 2 COM** User 2 Positive (+) Opens when failure occurs
Problem and/or Possible Cause Solution
Fan Fail (Contact 2 Open)
Monitoring cable is not connected. Check that the monitoring cable is correctly wired.
Fan is not connected to utility power. Check that the fan has utility power connection and supply. (Note: Fan off contact will be
open.)
One or both fans has failed. Check the status of the front panel fan fail LEDs and contact APC technical support.
Fan Off (Contact 1 Open)
Fan is switched off. Check that the fan switch is turned to the Low (I) or High (II) position.
Monitoring cable is not connected. Check that the monitoring cable is correctly wired.
Fan is not connected to utility power. Check that the fan has utility power and supply. (Note: Fan fail contact will be open.)
Fan 1 or Fan 2 LED is Illuminated
One or two fans have failed. Contact APC technical support.
* Normally closed / ** Common
Note: Hardwiring cables provided in the hardware kit.
Physical
Dimensions
(unit only)
9.7 H x 13.7 W x 3.4 D in
(246 H x 348 W x 86 D mm)
Net weight
(unit only)
9.5 lb (4.3 kg)
Shipping weight 32.8 lb (14.9 kg)
Nominal Air Flow
Low/High 325 CFM/474 CFM
Sound Level
Low/High 53 dB/60 dB
Electrical
Power Source 100-230 V; 50, 60 Hz
Rated Current 2.0 A
Attention: Standard drop ceiling hanger wire
required.
*Use a standard 7/8 in. hardwire clamp.

Produktspezifikationen

Marke: APC
Kategorie: Klimaanlage
Modell: ACF301EM

Brauchst du Hilfe?

Wenn Sie Hilfe mit APC ACF301EM benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Klimaanlage APC

APC

APC NetworkAIR 1000 AP7003 Bedienungsanleitung

22 September 2024
APC

APC ACF301EM Bedienungsanleitung

20 Juli 2024

Bedienungsanleitung Klimaanlage

Neueste Bedienungsanleitung für -Kategorien-

MundoClima

MundoClima MUCSR-H3 Bedienungsanleitung

16 Oktober 2024
Duux

Duux DXMA10 North Bedienungsanleitung

16 Oktober 2024
Duux

Duux DXAC04 Bedienungsanleitung

16 Oktober 2024
LG

LG HS-H076QPA0 Bedienungsanleitung

16 Oktober 2024
Klarstein

Klarstein Vita Pure 2G Bedienungsanleitung

16 Oktober 2024
Einhell

Einhell BMK 2400E Bedienungsanleitung

15 Oktober 2024
Qlima

Qlima P 126 Bedienungsanleitung

15 Oktober 2024
Amana

Amana PTC093K35AXXX Bedienungsanleitung

15 Oktober 2024
Amana

Amana AMAP121AB-2 Bedienungsanleitung

15 Oktober 2024
Amana

Amana PTC173J35AXXX Bedienungsanleitung

15 Oktober 2024