APart MICPAT-6 Bedienungsanleitung

APart Mikrofon MICPAT-6

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für APart MICPAT-6 (1 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/1

● Type : Table type active multizone paging mic

● Polar pattern : Directional, low feedback, electret capsule

● Frequency range : 80 Hz - 20 kHz

● Rated output level : 2 V balanced line output

● Rated output impedance : 50 Ohm

● Connection : bus system accepts multiple units in parallel

● Paging : 6 zone, individually selectable / all at once

● Cable Type : CAT5 terminated with RJ45 connector (supplied)/balanced microphone

cable (not terminated) : Black = GND / Blue = -sgl / Brown = +sgl

● Cable length : 5 m (supplied)

● Colour : grey

● Weight (without cable) : 0.550 kg

● Dimensions (base unit) 115 (W) X 162 (D) mm X 60 mm (H)

● Gooseneck length : 275 mm

The APart-audio paging microphone is a sturdy high quality

active multizone paging microphone.

It is specially designed for desk-top use. Multiple MICPAT-6

mics can be connected in parallel. You can use our optional

RJ45SPLIT unit for this purpose. The separate mic signal

cables are also connected in parallel.

The special design of the microphone capsule reduces the

risk of feedback drastically.

It has been designed speciﬁ cally for use with the APart-

audio MA246 mixing ampliﬁ er and future models, refer to

the product manuals for more details.

Connection to APart-audio MA246 mixing ampliﬁ er and fu-

ture models is done by standard CAT5 cable and a separate

microphone cable (balanced). Maximum approved cable

length is 100 meters.

In a multi mic setup, the microphone will automatically

detect if another microphone is already paging, indicated by

an orange call led. When paging is done, the led will return

to green.

Operation is straight forward, just select the zones you want

to page by pushing bottons 1 to 6. The zone 1 to 6 leds will

light red to indicate they have been selected. You can select

all zones at once by pushing the ‘all’ button. When the ‘call’

button led is green, you can page the selected zones by

pushing the ‘call’ button. The call button is momentary :

push to talk. All other buttons are latching. During paging

the call led will light orange, and all other mics connected in

parallel will be temporarily disabled (busy).

Ideal speaking distance is 10 to 15 cm.

Produktspezifikationen

Marke:	APart
Kategorie:	Mikrofon
Modell:	MICPAT-6
Gewicht:	550 g
Übertragungstechnik:	Kabelgebunden
Stecker:	RJ-45
Kabellänge:	5 m
Mikrofon-Frequenz:	80 - 20000 Hz
Mikrofon-Eingangsimpedanz:	50 Ohm
Ausrichtung des integrierten Mikrofons:	Unidirektional
Abmessungen (BxTxH):	115 x 162 x 60 mm
Kabeltyp:	CAT5