APart MA125 Bedienungsanleitung

APart Empfänger MA125

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für APart MA125 (8 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/8

MA125

OWNER’S MANUAL

MIXING AMPLIFIERSMIXING AMPLIFIERS

The MA125 is developed by

Audioprof nv

Lanteernhofstraat 90

BE-2100 Deurne

BELGIUM

info@apart-audio.com

www.apart-audio.com

Find more interesting audio solutions at www.apartaudio.com

MIXING AMPLIFIERSMIXING AMPLIFIERS

Technical Specifications

Outputs

Speaker zone output, euro block

High Z zone 100V

Speaker out; euro block

High Z 50 (20 ? ) 70 (39,2 ? ) 100V (80 ? )

Low Z 8 ?

Phantom power

Mic 1-2-3-4 14V; on / off switch

Pre amp out

Level 1V

Record out; RCA mono

Level 1V

Priority out

Level 24 V DC; max 0,6A, short circuit

protected

Chime 2 tone

activated by contact closure

on/off and level set by trimmer

Priority

Emergency input / Telephone

I 200 mV; 1 kHz

mutes all other signals

> 40 dB

Vox mute only for mic 1

II 0,6 mV; 1 kHz

mutes mic 2,3 & 4 + music

on/off/level set by trimmer

> 40 dB

III Priority contact

> 40 dB

mutes all music inputs

General

Mains voltage 230/115 VAC or 24VDC

Rated output 125W RMS

Frequency response 40Hz 22kHz (+1/-3 dB)

Distortion <0,5% @ -6dB, 1kHz

Bass control +/- 10dB, 100 Hz

Treble control +/- 10dB, 10 kHz

S/N amplifier: better than 95dB

line: better than 81dB

mic: better than 70dB

LED indicators limiter active, red

signal 100%, yellow

signal -25 dB, green

power on, green

protection active, red

Muted by priority LED any of the priority modes active, red

Weight approx.9 kg

Dimensions 430(W) x 102(H) x 230(D) mm, desktop mounted

19” wide, 2U high,

rack mounted (height = 88mm)

Inputs

Mic input 1; ¼” TRS phone jack at the front; XLR3, DIN5; Euro block

Sensitivity 1,5 mV

Impedance 600 ?

S/N (at max. volume) > 70 dB

Phantom power 14 V

Frequency response > 90Hz-> 15Khz (+1/-3 dB); speech filter

Vox mute trigger level 0,6 mV, 1Khz, mutes mic 2,3,4+music,

> 40 dB

Mic input 2,3 & 4: XLR3 balanced

Sensitivity 1,5 mV

Impedance 600 ?

S/N (at max. volume) > 70 dB

Phantom power 14 V

Frequency response > 90Hz-> 15Khz (+1/-3 dB); speech filter

Emergency input; euro block

Sensitivity 1 V

Impedance 600 ?

S/N (at max. volume) > 85 dB

Frequency response > 90Hz-> 20Khz (+1/-3 dB);

Mute mutes all, > 40 dB

Aux input; RCA

Sensitivity 500 mV (-6 dB)

Impedance 22 k?

S/N (at max. volume) > 81 dB

Frequency response > 50Hz-> 20Khz (+1/-3 dB)

Line 4; RCA

Sensitivity 200 mV (-14 dB)

Impedance 47 k?

S/N (at max. volume) > 81 dB

Frequency response > 50Hz-> 20Khz (+1/-3 dB)

CD in

Sensitivity 500 mV (-6 dB)

Impedance 30 k?

S/N (at max. volume) > 81 dB

Frequency response > 50Hz-> 20Khz (+1/-3 dB)

Tuner

Sensitivity 300 mV (-10 dB)

Impedance 30 k?

S/N (at max. volume) > 81 dB

Frequency response > 50Hz-> 20Khz (+1/-3 dB)

The is a very compact, professional PA mixing amplifier for commercial and industrial applications. All MA125

microphone inputs have integrated speech filters. He's able to drive 8-ohm or constant-voltage loudspeaker

lines (50-70-100V).

The amplifier has 4 microphone, 4 selectable line inputs and one emergency/telephone input.

Mic input 1 is meant to be the main microphone paging input, for its signal can be fed via the front ¼” TRS

phone jack or via a XLR3, DIN 5 or euro block connector at the back. When needed, two APart paging

microphones can be wired in parallel on each mic input!

The MA125 has a . The emergency/telephone input at the back has the highest three level priority system

priority. Its signal goes directly to the main amplifier, bypassing any front control, and an attenuator next to

the input sets its level. Microphone input 1 has the second priority level. With the control next to the DIN5

input, the vox (voice activated) mute for microphone 1 can be activated and mutes all other signals, except

the emergency input. The third level can be activated via a dry contact (“priority over music”) and mutes all

background music inputs only. This contact activates the chime as well, only when a level has been set using

the “chime level” potentiometer.

When the priority contact has been activated, 24V DC (max.0,6A) will be available to activate priority relays of

loudspeaker attenuators or other devices.

When needed, the signals mixed via your MA125 mixing amplifier, can be recorded or distributed via the

record output.

19” Brackets are shipped along with your amplifier.

The is device to built professional industrial sound applications. You can insert an extra equalizer MA125 the

(such as the APart PXQ2215) into the signal path or add extra power amps (APart PA240P), using the pre

amp out/power amp in RCA connectors. When shipped a RCA bridge has been inserted.

The complies with the CE standards.MA125

Important Safety Instructions

Before using your , take a few minutes to read these instructions carefully. This little time can avoid a MA125

lot of headaches afterwards.

1.Keep this manual for future reference.

2.Water and humidity are the biggest enemies of electric equipment. Operating it under moist conditions can even be

dangerous.

3.Clean only with dry cloth.

4.Do not operate near heaters or place it on other apparatus which produce a lot of heat.

5.Be sure your unit is always connected to the electrical safety earth. Do not defeat the safety purpose of a grounding- type

plug. If you have any doubt, please consult your dealer or a qualified technician.

6.Take care for the power cord. Never use a damaged power cord and install it in such a way that no one can walk on it.

7.Only use accessories specified by the manufacturer.

8.Distorted sound indicates that operating conditions are bad. Decrease the volume, check the speakers and

sources connected, or switch off the unit.

9. Disconnect the unit from the mains power supply, when you do not use it for a longer period.

10. When smoke ore bad smell comes from your MA125, switch off immediately and disconnect from mains.

11. This apparatus should only be serviced by qualified personnel. If not, the warranty might be void.

12. Do not remove the cover panel. Removal of the cover will expose hazardous voltages.

13. Do not block the air inlets of the amplifier and see that sufficient cool air can be supplied.

14. Please check the units' condition after unpacking. If the outside of the carton box has been damaged, inform your

shipper immediately.

15. Check all speaker lines for load charge (by APart wattmeter WM100) and short circuits,

before connecting them to your amplifiers!

SAFETY INFORMATION

Produktspezifikationen

Marke:	APart
Kategorie:	Empfänger
Modell:	MA125
Tiefe:	261 mm
Gewicht:	9000 g
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabelgebunden
RMS-Leistung:	125 W
AC Eingangsspannung:	115-230 V
Stromverbrauch (Standardbetrieb):	350 W
Energiebedarf:	230/115 V, 24V DC
Rauschverhältnis (SNR):	95 dB
Frequenzbereich:	40 - 22000 Hz
Ein-/Ausschalter:	Ja
Abmessungen (BxTxH):	483 x 230 x 88 mm
RMS Leistungsoutput pro Kanal (4 Ohm):	125 W
Line-out:	Ja
Line-in:	Ja
Rack-Kapazität:	2U
Verzerrung und Rauschen (1 kHz):	-6 dB