APart CONCEPT1 Bedienungsanleitung

APart Empfänger CONCEPT1

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für APart CONCEPT1 (12 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

3 basic operating modes combined in 1 device: stereo, 2Zone linked mono and 2Zone individual mono.

Paging microphone input with 2 zone programmable paging control.

Standalone and/or RS232 controlled operation.

Removable 19 inch rack ears included.

Menu driven hidden conguration accessible for installers only.

Lockable front panel controls.

Super simple no-nonsense user interface.

Multi functional stylish blue colour dot matrix gas display.

Presettable paging mic gain and separate tone control.

Integrated switchable highpass lter for use with optional subwoofers.

Separate line out and pre out.

4 stereo gain-adjustable line inputs with additional link-out on input 1.

Line 4 input also available as a mini jack in on the frontpanel for connection of personal audio devices.

Programmable maximum microphone and music levels for all zones.

Switchable automatic loudness compensation.

Low impedance (Concept 1) and 100 volt speaker line outputs (Concept 1T) available.

Powerfull dynamic power amplier circuit

Intelligent power limiter circuit.

1 or 2 zone paging microphone optionally available.

IR remote control optionally available.

IR control extender optionally available.

91 3 4 5

678

1) Power on/off button: push this button to turn the power on and off

2, 3, 4, 5) Source A-D selector: push this button to select line source A-D. A led above the knobs is

lit when source A-D is selected.

6) Source D mini jack input: this line input is shared with the source D connector at the rear

Only use one of the two at the same time.

7) Select button: push this button to select basic submenus

8) Multifunctional encoder knob: turn this knob to adjust the main volume and other menu parameters

9) Stand-by led: this led is lit when the unit is powered off by RS232 control or infrared remote.

The led will ash when data is transmitted or received from any remote control.

10) Infrared receiver

11) Multi functional dot matrix gas display

Produktspezifikationen

Marke:	APart
Kategorie:	Empfänger
Modell:	CONCEPT1
Gewicht:	6600 g
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabelgebunden
Impedanz:	4 Ohm
Betriebstemperatur:	0 - 40 °C
Verpackungsbreite:	530 mm
Verpackungstiefe:	380 mm
Verpackungshöhe:	170 mm
Paketgewicht:	7600 g
Fernbedienung enthalten:	Ja
Stromverbrauch (Standardbetrieb):	170 W
THD, totalklirren:	0.05 %
Energiebedarf:	230 - 240V, 50/60 Hz
Frequenzbereich:	10 - 40000 Hz
Abmessungen (BxTxH):	430 x 290 x 88 mm
Weitere Anschlüsse:	1x RS 232