APart CHAMP-2 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für APart CHAMP-2 (16 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 39 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
Champ - 2
Audiophile Stereo Power Amplier
• Caution: hot and sharp surfaces ! This professional device needs to be installed by
qualied personnel only.
Please check the carton box for any kind of damage on reception of the goods. In case of a •
damaged carton, please contact your dealer before opening the carton.
!!!! Danger !!!! Exposure to extremely high noise levels may cause a permanent hearing •
loss. Individuals vary considerably to noise induced hearing loss but nearly everyone will lose
somehearingifexposedtosufcientlyintensenoiseforasufcientamountoftime.Therefore
it is recommended that all persons exposed to equipment capable of producing high sound
pressurelevels,suchasthisamplier,beprotectedbyhearingprotectionwhileinstallingor
operating this unit.
Read all documentation before operating your equipment.•
Keep all documentation for future reference.•
Save the carton and packing material even if the equipment has arrived in good condition.•
Should you ever need to ship the unit, use only the original factory packing.•
Do not spill water or other liquids into or on the unit.•
Make sure power outlets conform to the power requirements listed on the back of the unit.•
Do not use the unit if the electrical power cord is frayed or broken.•
Always operate the unit with the AC ground wire connected to the electrical system ground.•
Havegaincontrolsonampliersturneddownduringpower-uptopreventspeakerdamageif•
there are high signal levels at the inputs.
Donotconnecttheinputs/outputsofampliersorconsolestoanyothervoltagesource,such•
asabattery,mainssource,orpowersupply,regardlessofwhethertheamplierorconsoleis
turned on or off.
Power down & disconnect units from mains voltage before making connections.•
Do not use the unit near stoves, heat registers, radiators, or other heat producing devices.•
Donotoperateequipmentonasurfaceorinanenvironmentwhichmaydistortthenormalow•
of air around the unit. If the unit is used in an extremely dusty or smoky environment, the unit
should be periodically “blown free” of dust.
Do not remove the cover. Removing the cover will expose you to potentially dangerous volt-•
ages.
Do not drive the inputs with a signal level higher than that required to drive equipment to full •
output.
Donotruntheoutputofanyamplierbackintoanotherinput.•
Do not ground the red output terminal, never connect a red output terminal to another red •
output terminal.
Incaseofmal-functionthisdeviceshouldbeservicedbyqualiedservicepersonnelonly.•
Dear customer,
Whydoeslivemusicleaveanunforgettableimpressiononyou?Theanswerissimple:dynamics.
Theabilityofasoundsystemtoproducecrystalclearlowlevelsoundsaswellasextreme
musical peaks without any distortion, the power to leave some headroom for those occasional
peaksinmusic.Purepower!Thiseaseofmusicreproductioncannotbedescribedinguresor
specications.
In the following pages we will explain how we have reached our goal. Champ-2 features an
exceptionallydynamicoutputstage,auniqueclassGamplier,allpackedinaoneunitfanless
enclosure. While our competitors are struggling with often poorly designed so called energy
efcientclassDdigitalampliers…well,wehavetakenacloselookandlistenedcarefullytosome
of these designs, and we were not impressed. We got inspired to make something APart from all
the rest, and started from scratch.
Takealookatournewchampionwithhisstrikingdesignandpowerfulsetoffeaturesthatwill
exceed the demands of passionate music lovers as well as system integrators. Designed with
a continuous 4 ohm, 2 ohm dynamically stable high current output stage, Champ-2 will surprise
youwithitssonicexcellenceanddynamiccapacities.Remember,thisuniqueamplierhasbeen
developed with the impact of live music dynamics in mind. A true beauty, inside as well as outside,
but also a beast if necessary.
Takeyourtimeandlistentoournew amplier.Pleasefastenyourseatbeltsandbeware,Champ-2
you might get blown away, not by the cooling fan, simply because there isn’t any. Experience the
pure musical power of Champ-2.
1. Fanless design and highlights
2. Features
3. Inputs and outputs
4. Rack mounting and wiring
5. Standalone use
6. Technical specications


Produktspezifikationen

Marke: APart
Kategorie: Empfänger
Modell: CHAMP-2
Gewicht: 7500 g
Produktfarbe: Schwarz
Übertragungstechnik: Kabelgebunden
Impedanz: 4 Ohm
Verpackungsbreite: 560 mm
Verpackungstiefe: 550 mm
VerpackungshĂśhe: 100 mm
Paketgewicht: 9000 g
THD, totalklirren: 0.05 %
Energiebedarf: 230V AC, 50Hz
Frequenzbereich: 10 - 50000 Hz
Abmessungen (BxTxH): 483 x 360 x 44 mm

Brauchst du Hilfe?

Wenn Sie Hilfe mit APart CHAMP-2 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Empfänger APart

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung fĂźr -Kategorien-