Anton/Bauer NM 19 Bedienungsanleitung

Anton/Bauer Batterie NM 19

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Anton/Bauer NM 19 (10 Seiten) in der Kategorie Batterie. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/10

One World. One Smart Choice.™

Owner’s Manual

NM14/19

& 28/38

A7595-0366 Rev C

Approved Copy

TABLE OF CONTENTS

1 INTRODUCTION

1-2 NM 14/19 BATTERY MODULE DISASSEMBLY

3 NM 14/1919 BATTERY MODULE ASSEMBLY

4-5 NM 28/38 BATTERY DISASSEMBLY

5-6 NM 28/38 BATTERY ASSEMBLY

7 LIMITED WARRANTY

Approved Copy

INTRODUCTION

The CINE VCLX series of batteries are designed and manufactured to the high quality expected from all Anton/Bauer batteries. Because of the

specialized and proprietary circuitry that is used in these batteries, the cells inside of any CINE battery must be replaced with an NM14/19 or

NM28/38 module.

The NM14/19 and NM28/38 modules eliminate the need for “re-celling”, long waiting periods and unnecessary shipping of the CINE

® batteries.

The old battery module is simply removed with a few screws, the connectors are unplugged, and the new module is inserted. Then, the old

module can simply be recycled.

The NM14/19 module is the cell replacement module for the CINE VCLX/2 batteries. Please follow the instructions in this manual to ensure

safe and reliable installation. (Note: the NM14/19 module is not for use with the CINE VCLX, and CINE VCLX-CA batteries.)

The NM28/38 module is the cell replacement module for the CINE VCLX and CINE VLCX-CA batteries. As mentioned above, please follow the

instructions in this manual to ensure safe and reliable installation. (Note: The NM28/38 module cannot be used with the CINE VCLX/2 batter-

ies.)

If you have any questions or concerns, please contact our customer support group at support@antonbauer.com or if inside the U.S. at (800)

541-1667.

STEP 1

Remove the (2) #10 screws and (2) # 10 washers as shown in gure A.

Note: Do not remove handle or handle hardware from side plates.

STEP 2

Remove the (4) 6-32 screws and (4) 6-32 washers as shown in gure B.

NM 14/19 BATTERY MODULE DISASSEMBLY OF UNIT

Figure A Figure B

#10

screw

QTY 2

6-32

screw

QTY 4

Approved Copy

Produktspezifikationen

Marke:	Anton/Bauer
Kategorie:	Batterie
Modell:	NM 19
Akku-/Batteriekapazität:	- mAh
Produkttyp:	Akku
Produktfarbe:	Schwarz
Akku-/Batteriespannung:	- V
Batteriekapazität:	280 Wh
Kompatible Produkte:	CINE VCLX/2
Kompatibilität:	CINE VCLX/2