Antari Z-1000 MK2 Bedienungsanleitung

Antari Lichteffektmaschine Z-1000 MK2

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Antari Z-1000 MK2 (24 Seiten) in der Kategorie Lichteffektmaschine. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/24

Z- -800II, Z 1000II & Z -1020 USER MANUAL

Z-800II, Z- -1000II und Z 1020 BEDIENUNGSANLEITUNG

MODE D’EMPLOI des Z -800II, Z-1000II et Z-1020

Congratulations on the purchase of your new

ANTARI Z-SERIES II FOG MACHINE.

Wir beglückwünschen Sie zum Kauf Ihres neuen ANTARI Z -SERIES NEBELGERÄTES.

Nous vous félicitons pour l’achat de votre nouvelle

Z-SERIES machine à fumée d’ANTARI.

♦ Read and save these instructions

♦ Bitte lesen Sie diese Anweisungen und bewahren Sie sie gut auf

♦ Lisez et Gardez ces instructions

 2006 Antari Lighting and Effects Ltd.

TeUser Manual

Antari Z 800II, Z-1000II & Z-1020 Fog Machine

Congratulations on the purchase of your new

ANTARI Z-Series II FOG MACHINE.

Introduction

Thank you for choosing a ANTARI Z-Series II Fog Machine. You now own a rugged and powerful state-of- -the art

machine. Prior to use, we suggest that you carefully read all of the instructions. By following the suggestions

found in this user manual, you can look forward to the reliable and satisfactory performance of your ANTARI Fog

Machine for years to come.

Please follow these operation, safety and maintenance instructions to ensure a long and safe life for your fog

machine.

CAUTION:

Risk of electric shock. Disconnect the appliance from the electric supply before refilling liquid, cleaning or

performing maintenance on the machine.

Danger of E Slectric hock

♦ Keep this device dry.

♦ For inside use only. Not designed for outside use.

♦ For the 110V models, use 3-prong grounded electrical outlet only. Prior to use take care to determine that the

unit is installed at the rated voltage.

♦ Always unplug your ANTARI Z-Series II Fog Machine before lling its tank.

♦ Always k eep fog machine in upright position.

♦ Turn off or unplug the machine when not in use.

♦ This machine is not water-proof. If moisture, water, or fog fluid gets inside the housing, immediately unplug the

unit and contact a service technician or your ANTARI dealer before using it again.

♦ No user serviceable parts inside. Refer to your ANTARI dealer or other qualified service personnel.

Danger of Burns

♦ This device is for adult use only and must be installed out of the reach of children. Never leave the unit running

unattended.

♦ Never aim the output nozzle directly at people.

♦ Fog machine output is very hot. Avoid coming within 60 cm of the output nozzle during operation.

♦ Locate the fog machine in a well-ventilated area. Never cover the unit’s vents. In order to guarantee adequate

ventilation, allow a free air space of at least 20 cm around the sides and top of the unit.

♦ Never aim the output nozzle at open flames.

♦ If the supply cord is damaged, it must be replaced by manufacturer or its service agent or similarly qualified

personnel in order to avoid a hazard.

♦ The output nozzle becomes very hot during operation (200°C). Keep flammable materials at least 50 cm away

from the nozzle.

♦ Always allow your ANTARI Fog Machine to cool down before attempting to clean or service it.

Danger of Explosion

♦ Never add flammable liquids of any kind (such as oil, gas, perfume) to the fog liquid.

♦ Use only high-quality, water-based fog liquid that your dealer recommends. Other fog liquids may cause

clogging or “spitting”.

♦ Always make sure there is sufficient liquid in the tank. Operating this unit without liquid will cause damage to

the pump as well as over-heating of the heater.

♦ If your ANTARI Z-800II, Z-1000II and Z-1020 Fog Machine fails to work properly, discontinue use immediately.

Drain all fog liquid from the tank, pack the unit securely (preferably in the original packing material), and return

it to your ANTARI dealer for service.

♦ Always drain tank before mailing or transporting this unit.

♦ Never drink fog liquid. If it is ingested, call a doctor immediately. If fog liquid comes in contact with skin or

eyes, rinse thoroughly with water.

Note: Pay attention to all warning labels and instructions printed on the exterior of your ANTARI Fog Machine

Unpacking & Inspection

Open the shipping carton and verify that all equipment necessary to operate the system has arrived intact.

The shipping carton should contain the following items:

1. One unit of Z-Series II Fog Machine

2. Power cord

3. Z-10 Remote Control

4. User Manual

5. Mounting brackets with washers/screws (for Z-1000II)

If any equipment is missing contact your ANTA RI dealer immediately.

Before beginning your initial setup on ANTARI Z-800II, Z-1000II or Z-1020 Fog Machine, make sure that there is no

evident damage caused by transportation. In the event that the unit’s housing or cable is damaged, do not plug it

in and do not attempt to use it until after contacting your ANTARI dealer for assistance.

Setup

♦ Remove all packing materials from shipping box. Check that all foam and plastic padding is removed,

especially in the nozzle area.

♦ Place fog machine on a flat surface and remove fog liquid tank cap.

♦ Fill with high- -quality, water based fog liquid recommended by ANTARI dealer. Any other types of fluid can

damage the unit resulting in spitting and serious clogging problem . When filled, place cap back on liquid tank .

Be careful not to exceed the maximum fluid level. DO NOT OVERFILL.

♦ Firmly attach the remote control cable to the proper input on the back of the machine.

Operation

♦ Add fluid carefully to the liquid tank. Do not overfill the tank.

♦ Plug power cord into a grounded electrical outlet. Turn the power switch to “ON” on the back of the machine.

The unit will take a couple of minutes to warm up the heater. During this time the machine cannot generate

fog. When the remote control is attached the red lights (on Z-800II handle) and green light (on the remote) will

flash and stay ON when the warm-up time is complete.

Produktspezifikationen

Marke:	Antari
Kategorie:	Lichteffektmaschine
Modell:	Z-1000 MK2
Gewicht:	6600 g
Produktfarbe:	Silber
AC Eingangsspannung:	100 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
Leistung:	1000 W
Kabellänge:	7.62 m
Kapazität Flüssigkeitstank:	1.7 l
Anwärmdauer:	5.5 min
Abmessungen Gerät (B x H x T):	198 x 151 x 433 mm
Arbeitende Flüssigkeit:	Wasser
Rauch output volumen:	- m³/min