Antari B-100 Bedienungsanleitung

Antari Seifenblasenmaschinen B-100

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Antari B-100 (7 Seiten) in der Kategorie Seifenblasenmaschinen. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/7

User Manual for the B-100(X) Bubble Machine

♦ Save and read these instructions

♦ Bitte lesen Sie und sichern Sie diese Anweisungen

♦ Lisez et Gardez ces instructions

Antari Bubble Machine

Thank you for choosing the Antari Bubble Machine. You now own a rugged

and powerful state-of-the-art machine. Prior to use, we suggest that you

carefully read all of the instructions. By following the suggestions found in this

user manual, you can look forward to exceptional performance from your Antari

Bubble Machine for years to come.

Please follow these operation, safety and maintenance instructions to

ensure a long and safe life for your Antari Bubble Machine.

Specifications

Power: AC 120V/60Hz (120V Model)

AC 230V/50Hz (230V Model)

Fuse: F2A/250V (120V Model)

T1A/250V (230V Model)

Dimensions (mm): 236.6 x 189.2 x 150

Weight: Net – 3.4 kg, Gross – 4.5 kg

CAUTIONS

Pay attention to all warning labels and instructions printed on the exterior

of your Antari Bubble Machine

 Do not overfill your bubble machine. Overfilling will cause the unit to leak.

Danger of electric shock

 Keep this device dry.

 Keep the bubble machine upright.

 For the 110V models, use 3-prong grounded electrical outlet only. Prior to

use take care to determine that the unit is installed at the rated voltage.

 Turn off or unplug when not in use.

 The power plug needs to be clearly seen by user when installed on the wall.

 This machine is not water-proof or splash-proof. If moisture, water, or any

liquid gets inside the housing, immediately unplug the unit and contact a

service technician or your dealer before using it again.

 No user serviceable parts inside. Refer to your Antari dealer or other

qualified service personnel.

 For indoor use only. Not designed for outdoor use.

 This appliance must be earthed.

 For adult use only. The bubble machine must be installed out of the reach

of children. Never leave the unit running unattended.

 Never aim the output at open flames.

 Extended use will make all surfaces slippery.

 Position output of bubbles away from persons.

 Switch off from mains when refilling the liquid or cleaning the system.

 Regular cleaning of the bubble wheel is required.

 Do not transport with liquid. If the machine get wet, do not use until it is

completely dry.

 Antari bubble liquid may leave permanent marks on clothing.

Pay attention to all warning labels and instructions printed on the exterior

of your Antari Bubble Machine.

Unpacking & Inspection

Open the shipping carton and check that all equipment necessary to operate the

system has arrived intact. In addition to the Antari Bubble Machine, you should

receive the following items:

1. This user manual.

2. Power cord and plug.

 Before beginning initial setup of your Antari Bubble Machine, make sure that

there is no evident damage caused by transportation.

 In the event that the unit’s housing or cable is damaged, do not plug it in and

do not attempt to use it until after contacting your dealer for assistance.

Setup

 Remove all packing materials from the bubble machine.

 Place bubble machine on a flat surface.

 Loosen the side screws and lift the housing upwards. You will see a liquid

tank.

 Pour bubble liquid into the liquid tank, being careful not to exceed the

maximum fluid level. DO NOT OVERFILL.

 When the container is full, lower the housing and tighten the screws.

IMPORTANT SAFETY NOTICE:

Ensure your bubble machine is unplugged from the mains electrical supply

before attempting to open the housing.

To help avoid accidental exposure to dangerous live AC mains voltage, two

safety screws are fitted that require a screwdriver to remove. Once these are

removed, the finger screws can be undone by hand (see photo above).

Once the screws are removed, the lid of the housing can be carefully swung

upwards, as shown above. Take care not to spill any of the bubble fluid inside

the unit.

Produktspezifikationen

Marke:	Antari
Kategorie:	Seifenblasenmaschinen
Modell:	B-100
Gewicht:	4200 g
Produktfarbe:	Weiß
Stromverbrauch (Standardbetrieb):	25 W
Eingangsspannung:	100 - 240 V
Eingangsfrequenz:	50 - 60 Hz
Kapazität Flüssigkeitstank:	1 l
Abmessungen Gerät (B x H x T):	170 x 172 x 341 mm