AMX Modero X MXD-700 Bedienungsanleitung

AMX Monitor Modero X MXD-700

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für AMX Modero X MXD-700 (2 Seiten) in der Kategorie Monitor. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Quick Start Guide

MXD-700 7" Modero X Series® Wall/Flush Mount Touch Panel

Overview

The MXD-700 7” Modero X Series® Wall/Flush Mount Touch Panel, available in

portrait (MXD-700-P: FG5968-08) and landscape (MXD-700-L: FG5968-14) models,

includes a beautiful capacitive multi-touch screen that provides users access to

multiple applications with minimal navigation. This new generation of touch panels is

built for usability, offering edge-to-edge capacitive touch glass with multi-touch

capabilities. It features advanced technology empowering users to operate AV

equipment seamlessly, while providing the ultimate in audio and video quality. With a

lightning fast processor, brilliant graphics and enhanced capabilities, the Modero X

Series is the control surface that simply delivers more.

For more information on installation and configuration, please refer to the

MXT/MXD-700 Operation Reference Guide, available at www.amx.com.

Product Specifications

NOTE: The MXD-700-P-NC ( ) No Comm touch FG5968-28) and MXD-700-L-NC (FG5968-29

panels do not have microphone capability. These otherwise have all of the functionality of the

MXD-700 panels.

FIG. 1 MXD-700, Landscape and Portrait

MXD-700 (FG5968-08/14) Specifications

Power: PoE (Power over Ethernet), 802.3af, class 3

Power Consumption: • Full-On: 8W maximum

•Standby: 3.2 W

•Shutdown: 1 W

•Startup Inrush Current: Not Applicable due to PoE standard

Front Panel Components:

NFC Transceiver: Antenna and transceiver for Near Field Communications

device detection and interaction.

Light Sensor: Photosensitive light detector for automatic adjustment of the

panel brightness.

Motion Sensor: Proximity detector to wake the panel when it is approached.

• Typical Range: 1 foot (30.48 cm)

•Maximum Range: 3 feet (91.44 cm)

•Range width: 10 degrees

Sleep Button: Single button on top of panel (Landscape) or left side

(Portrait) for placing panel in sleep mode, for powering off the

panel, and for accessing the Settings Pages.

Microphone: -42dB ± 3dB sensitivity FET microphone

Speakers: 4 ohm, 2 Watt, 300Hz cutoff frequency

Rear Panel Components:

USB Port: USB connector used for keyboard and mouse connections, or

for firmware uploads.

Ethernet 10/100 Port

and Cable:

10/100 Base-T RJ-45 connector for Ethernet connectivity and

PoE.

Touch Panel Display:

Display Type: TFT Active Matrix Color LCD with In-Plane Switching (IPS)

technology.

Display Size: • Landscape: 7.3" x 4.8" (186 mm x 122 mm), 8.8" (222 mm)

diagonal

•Portrait: 4.8" x 7.3" (122 mm x 186 mm), 8.8" (222 mm)

diagonal

Viewable Area: • Landscape: 6.05" x 3.54" (154 mm x 90 mm), 7.0" (178 mm)

diagonal

•Portrait: 3.54" x 6.05" (90 mm x 154 mm), 7.0" (178 mm)

diagonal

Viewing Angle: • Vertical: ± 89°

• Horizontal: ± 89°

MXD-700 (FG5968-08/14) Specifications (Cont.)

Touch Panel Display (Cont.):

Screen Resolution

(W x H):

•Landscape: 1024x600

•Portrait: 600x1024

Aspect Ratio (W x H): • Landscape: 16:9

•Portrait: 9:16

Brightness: 400 cd/m2

Contrast Ratio: 800:1

Color Depth: 16,7M colors

Backlight Type: LED

Touch Overlay: Projected Capacitive; Multi-touch support, 3 simultaneous

max.

Communications:

Ethernet: 10/100 port, RJ-45 connector and cable. Supported IP and IP-

based protocols: UCP, TCP, ICMP, ICSP, IGMP, DHCP, Telnet,

FTP, DNS, RFB (for VNC), HTTP

USB: 1 - USB host 2.0, Type A ports

Near Field

Communications

(NFC):

Supports standards ISO/IEC 15693, ISO/IEC 14443A, ISO/

IEC 14443B; Unique Identifier (UID), Typ Range=.25",

Max = .5"

Bluetooth: HID Profile v1.1, Keyboard/Mouse Support, requires MXA-BT

Bluetooth Adaptor.

Video:

Supported Video

Codecs:

• MPEG2-TS: MPEG-2 Main Profile @High Level up to 720p

at 25 fps (decode only)

• MJPEG up to 720p at 25 fps (decode only)

Streaming/File Formats: MPEG-TS for MPEG-2; HTTP for MJPEG

Audio:

Streaming/File Formats: WAV, MP3

Intercom: Full Duplex VoIP, SIP v2.0 (supported with AMX-CSG)

Operating Environment: • Operating Temperature: 32° F to 104° F (0° C to 40° C)

• Storage Temperature: 4° F to 140° F (-20° C to 60° C)

• Humidity Operating: 20% to 85% RH

• Humidity Storage: 5% to 85% RH

Dimensions (HWD): • Landscape: 4.8" x 7.3" x 2.5" (122 mm x 186 mm x 63 mm)

•Portrait: 7.3" x 4.8" x 2.5" (186 mm x 122 mm x 63 mm)

Weight: 1.4 lbs (0.64 Kg)

Certifications: • UL

• FCC Part 15 Class B

• C-Tick CISPR 22 Class B

• CE EN 55022 Class B and EN 55024

• CB Scheme IEC 60950-1

• IC

• IEC/EN-60950

• RoHS

Included Accessories: • MXD-700 Installation Guide (93-5968-07)

• MXA-CLK Modero X Series Cleaning Kit (FG5968-16)

• MXD-700 Installation Template (68-5968-04)

• MXD-700 Back Box (68-5968-04)

Other AMX Equipment: • PS-POE-AF-TC, POE Injector, 802.3af Compliant

( )FG423-83

• MXA-BT Bluetooth USB Adaptor (FG5968-19)

• NXA-ENET8-2POE, Gigabit Switch, 8 Port POE, 2 Port

SFP (FG2178-63)

• CB-MXP7, Rough-In Box and Cover Plate for Modero X

Series Touch Panel, 7" (FG039-18)

• MXA-MPL, Modero X Series Multi Preview Live

( )FG5968-10

• MXA-MP, Modero X Series Multi Preview (FG5968-20)

For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).

10/13

AMX reserves the right to alter specifications without notice at any time.

3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com

93-5968-08 REV: H

Panel Connectors and Wiring

FIG. 2 shows the connectors located on the underside of the MXD-700.

Power for the MXD-700 via Power Over Ethernet

Power for the MXD-700 is supplied via Power Over Ethernet (PoE), utilizing an AMX-

certified, capacitive touch-compliant PoE injector such as the PS-POE-AT High Power PoE

Injector (FG423-81) or other approved AMX PoE power source. The incoming Ethernet cable

should be connected to the RJ45 port on the MXD-700 (FIG. 2 and FIG. 3).

Configuring the MXD-700

The MXD-700 is equipped with Settings Pages that allow you to set and configure various

features on the panel. For more information on connecting and configuring the

MXD-700 to a network, please refer to the Modero X Series Programming Guide, available

at www.amx.com.

Installing the MXD-700

The MXD-700 can be installed either directly into a solid surface environment, using either

solid surface screws or the included locking tabs for different mounting options. For more

information, please refer to the MXD-700 Operation/Reference Guide, available at

www.amx.com.

The MXD-700 is contained within a clear outer housing known as the back box. This back

box is removed when installing the device into a wall or when using the optional Rough-In

Box accessory ( ). For more information on back box removal, please refer to the FG039-18

MXD/T-700 Operation Reference Guide, available at www.amx.com.

Installing the MXD-700 into a wall

The back box (FIG. 4) is designed to attach the panel to most standard wall and solid surface

materials. This back box has two locking tabs (one on top and one on bottom) to help lock

the back box to the wall. These locking tabs are only extended AFTER the back box is

inserted into the wall. Using the locking tabs is highly recommended for standard mounting

surfaces such as walls. For thin walls and solid surfaces, use #4 mounting screws (not

included).

WARNING: When installing the back box, make sure that the assembly is in the correct

position and in the correct place. Once the locking tabs are extended and locked into place,

removing the back box may be difficult without having access to the back of the wall or

causing damage to the wall.

Note: In order to guarantee a stable installation of the MXD-700, the thickness of the wall

material must be a minimum of .50 inches (1.27cm) and a maximum of .875 inches (2.22cm).

The surface should also be smooth and flat.

WARNING: The maximum recommended torque to screw in the locking tabs on the plastic

back box is 5 IN-LB [56 N-CM]. Applying excessive torque while tightening the tab screws,

such as with powered screwdrivers, can strip out the locking tabs or damage the plastic back

box.

1. After ensuring proper placement, cut out the mounting surface, using the MXD-700

Installation Template (68-5968-04) as a guide. Refer to the dimensions in the

MXD/T-700 Operation/Reference Guide, available from www.amx.com, for more

information.

CAUTION: Making sure the actual cutout opening is slightly smaller than the provided

dimensions is highly recommended. This action provides the installer with a margin for error

if the opening needs to be expanded. Too little wall material removed is always better than

too much.

2. Remove the back box knockouts (FIG. 4) and thread the incoming wiring through the

knockout holes.To facilitate installation, thread the Ethernet cable through a bottom

knockout (Landscape) or a right-side knockout (Portrait), and the USB cable through a

top knockout (Landscape) or left knockout (Portrait).

3. Thread the incoming Ethernet wiring from their terminal locations through the surface

opening and through the knockouts.

4. Push the back box flat into the mounting surface and secure with either the locking

tabs or #4 mounting screws (not included). In order to prevent damage to the touch

panel, make sure that any screws used are flush with the back box, and the back box

goes freely into the opening.

5. Insert each connector into its corresponding location along the back of the MXD-700.

Gently pull the RJ45 adapter from underneath the electronics cover (FIG. 3), attach the

RJ45 cable, and push the connection back under the cover. Lock the RJ45 cable into

the clip above the cable connection (FIG. 2) to facilitate the rest of the installation.

6. Test the incoming wiring by attaching the panel connections to their terminal locations

and applying power. Verify that the panel is receiving power and functioning properly to

prevent repetition of the installation.

NOTE: Do not disconnect the connectors from the touch panel. The unit must be installed

with the attached connectors before being inserted into the drywall.

7. Latch the panel onto the top hooks on the back box and rotate it down (Landscape)

onto the bottom snaps or on the left side and rotate it to the right (Portrait installation)

(FIG. 5). Press gently but firmly and evenly on the surface of the glass until the bottom

panel snaps “click” to lock it down.

WARNING: if you see a gap between the panel and the back box, or feel any binding while

locking down the panel, stop immediately and verify that no cables or other items are in the

way. Do not force the panel into position, as this can cause damage to the touch screen or

the panel electronics.

8. Reconnect the terminal Ethernet and USB to their respective locations on either the

Ethernet port or NetLinx Master.

Uninstalling the MXD-700

For information on uninstalling the MXD-700, please refer to the MXD/T-700 Operation

Reference Guide, available at www.amx.com.

NOTE: For a demonstration of MXD-700 uninstallation, please refer to the Modero X Wall

Removal video on the AMXconfigure channel on YouTube:

http://www.youtube.com/user/AMXconfigure/

FIG. 2 Rear of the MXD-700 (Landscape)

FIG. 3 Rear of the MXD-700 (with RJ45 connection extended)

RJ45

Port

USB

Port

Top

RJ45

Cable

Clip

RJ45

Cable

Clip

RJ45

Port

FIG. 4 MXD-700 Back Box Installation (Landscape)

FIG. 5 Installing the MXD-700

Knockouts

Back Box

Mounting Surface

Locking

Tab

#4 Screws

Mounting Surface

Back Box

Latch Hooks

Snaps

Produktspezifikationen

Marke:	AMX
Kategorie:	Monitor
Modell:	Modero X MXD-700
Touchscreen:	Ja
Bildschirmdiagonale:	7 "
Bildschirmtechnologie:	LCD
Eingebaute Lautsprecher:	Ja
Produktfarbe:	Schwarz
RMS-Leistung:	2 W
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	20 - 85 %
Zertifizierung:	- FCC Part 15 Class B\n- C-Tick CISPR 22 Class B\n- CE EN 55022 Class B and EN 55024\n- CB Scheme IEC 60950-1\n- IC\n- IEC/EN-60950\n- RoHS/WEEE compliant
Stromverbrauch (Standardbetrieb):	8 W
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Bildschirmform:	Flach
Natives Seitenverhältnis:	16:9
Helligkeit:	400 cd/m²
Kontrastverhältnis:	800:1
Bildwinkel, horizontal:	89 °
Bildwinkel, vertikal:	89 °
Stromverbrauch (Standby):	3.2 W
Temperaturbereich bei Lagerung:	-20 - 60 °C
Luftfeuchtigkeit bei Lagerung:	5 - 85 %
Gewicht (ohne Ständer):	640 g
Abmessungen (BxTxH):	186 x 63 x 122 mm
Speicherkapazität:	512 MB
Art des Touchscreens:	Multi-Nutzer
Seitenverhältnis:	16:9
LED-Hintergrundbeleuchtung:	Ja
Wandmontage:	Ja
NVIDIA G-SYNC:	Nein
AMD FreeSync:	Nein
Display, sichtbarer Bereich BxH:	90 x 154 mm
Temperatur Betriebsumgebung:	32 - 104 °F
Typ der Hintergrundbeleuchtung:	LED
Anzahl der vorgeschalteten Steckplätze:	2
Touchscreen Technologie:	Kapazitiv
Display-Auflösung:	1024 x 600 Pixel