Amprobe ACD-51NAV Bedienungsanleitung

Amprobe Messgeräte ACD-51NAV

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Amprobe ACD-51NAV (161 Seiten) in der Kategorie Messgeräte. Dieser Bedienungsanleitung war für 33 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/161
Users Manual
• Mode d’emploi
• Bedienungshandbuch
• Manual d’Uso
• Manual de uso
ACD-50NAV
600A AC Navigator Clamp
ACD-51NAV
600A AC TRMS
Navigator Clamp
ACDC-52NAV
600A AC / DC TRMS
Navigator Clamp
ACD-53NAV
1000A AC TRMS
Navigator Clamp
ACDC-54NAV
1000A AC / DC TRMS
Navigator Clamp
ACD-50NAV
600A AC Navigator Clamp
ACD-51NAV
600A AC TRMS Navigator Clamp
ACDC-52NAV
600A AC/DC TRMS Navigator Clamp
ACD-53NAV
1000A AC TRMS Navigator Clamp
ACDC-54NAV
1000A AC/DC TRMS Navigator Clamp
Users Manual
07/ 2013, Rev.2
©2013 Amprobe Test Tools.
All rights reserved. Printed in Taiwan
English
Limited Warranty and Limitation of Liability
Your Amprobe product will be free from defects in material and workmanship for 1
year from the date of purchase. This warranty does not cover fuses, disposable batteries
or damage from accident, neglect, misuse, alteration, contamination, or abnormal
conditions of operation or handling. Resellers are not authorized to extend any other
warranty on Amprobe’s behalf. To obtain service during the warranty period, return the
product with proof of purchase to an authorized Amprobe Test Tools Service Center or
to an Amprobe dealer or distributor. See Repair Section for details. THIS WARRANTY
IS YOUR ONLY REMEDY. ALL OTHER WARRANTIES - WHETHER EXPRESS, IMPLIED OR
STAUTORY - INCLUDING IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE
OR MERCHANTABILITY, ARE HEREBY DISCLAIMED. MANUFACTURER SHALL NOT BE
LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES
OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some states or countries
do not allow the exclusion or limitation of an implied warranty or of incidental or
consequential damages, this limitation of liability may not apply to you.
Repair
All test tools returned for warranty or non-warranty repair or for calibration should
be accompanied by the following: your name, company’s name, address, telephone
number, and proof of purchase. Additionally, please include a brief description of
the problem or the service requested and include the test leads with the meter. Non-
warranty repair or replacement charges should be remitted in the form of a check, a
money order, credit card with expiration date, or a purchase order made payable to
Amprobe® Test Tools.
In-Warranty Repairs and Replacement – All Countries
Please read the warranty statement and check your battery before requesting repair.
During the warranty period any defective test tool can be returned to your Amprobe®
Test Tools distributor for an exchange for the same or like product. Please check the
“Where to Buy” section on www.amprobe.com for a list of distributors near you.
Additionally, in the United States and Canada In-Warranty repair and replacement units
can also be sent to a Amprobe® Test Tools Service Center (see below for address).
Non-Warranty Repairs and Replacement – US and Canada
Non-warranty repairs in the United States and Canada should be sent to a Amprobe®
Test Tools Service Center. Call Amprobe® Test Tools or inquire at your point of purchase
for current repair and replacement rates.
In USA In Canada
Amprobe Test Tools Amprobe Test Tools
Everett, WA 98203 Mississauga, ON L4Z 1X9
Tel: 888-993-5853 Tel: 905-890-7600
Fax: 425-446-6390 Fax: 905-890-6866
Non-Warranty Repairs and Replacement – Europe
European non-warranty units can be replaced by your Amprobe® Test Tools distributor
for a nominal charge. Please check the “Where to Buy” section on www.amprobe.com
for a list of distributors near you.
Amprobe® Test Tools Europe
In den Engematten 14
79286 Glottertal, Germany
tel: +49 (0) 7684 8009 - 0
*(Correspondence only – no repair or replacement available from this address. European
customers please contact your distributor.)customers please contact your distributor.)
ACD-50 Series CAT IV Navigator Clamps Series
1 Jaw
2 Voltsense Light
3 Trigger
4 Hold / DCA Zero Key
5 Rotary Switch
6 Display
7 Navigator Key
8 V / / Input
9 Common Input
1
2
4
5
6
7
8
9
3
CONTENTS
SYMBOLS ........................................................................................................ 1
UNPACKING AND INSPECTION ...................................................................... 2
FEATURES ........................................................................................................ 2
OPERATION ..................................................................................................... 3
Making Basic Measurement 4 ......................................................................
Measuring Voltage 5 .....................................................................................
Measuring Current 6 .....................................................................................
Auto Sense Mode 7 .......................................................................................
Peak Hold 7 ...................................................................................................
Inrush Current 8 ............................................................................................
DC A ZERO 9 ..................................................................................................
Measuring Frequency 9 ................................................................................
MAX/MIN/AVG 9 ............................................................................................
THD Measurement 10 .....................................................................................
LPF 11 ...............................................................................................................
Measuring Active Power (W) / Power factor (PF) 12 .....................................
Phase Rotation 14 ...........................................................................................
OHM Measurements 15 ..................................................................................
Measuring Capacitance 16 .............................................................................
Measuring Temperature °C / °F 17 .................................................................
Measuring μA Current 18 ...............................................................................
AUTO / Manual Range 19 ...............................................................................
HOLD Key 19 ...................................................................................................
VoltSense 20 ....................................................................................................
Buzzer 20 .........................................................................................................
Power-up Option........................................................................................ 20
Battery State Display 20 ..................................................................................
SPECIFICATION ................................................................................................ 21
MAINTENANCE AND REPAIR ......................................................................... 27
Trouble Shooting........................................................................................ 27
Cleaning and Storage 27 ................................................................................
Battery Replacement 27 .................................................................................
1
SYMBOLS
Caution ! Risk of electric
shock
Caution ! Refer to the
explanation in this Manual
Application around and
removal from hazardous live
conductors is permitted.
Equipment protected
by double or reinforced
insulation
Alternating Current (AC). Direct Current (DC).
Temperature Measurement Resistance Measurement
Capacitance Measurement Diode Measurement
Continuity Beeper Earth (Ground)
To alert you to the presence
of a potentially hazardous
voltage, when the Meter
detects a voltage 30 V or a ≧
voltage overload (OL) in V.
This symbol is displayed.
Complies with European
Directives
Conform to relevant
Australian standards Battery
Do not dispose of this product as unsorted municipal waste.
Contact a qualified recycler
Safety Information
• Individual protective equipment should be used if HAZARDOUS LIVE
parts in the installation where measurement is to be carried out
could be ACCESSIBLE
• This manual contains information and warnings that must be
followed for operating the instrument safely and maintaining the
instrument in a safe operating condition. If the instrument is used in
a manner not specified by the manufacturer, the protection provided
by the instrument may be impaired.
• The meter is intended only for indoor use.
• The meter protection rating, against the users, is double insulation
per IEC/EN 61010-1 3rd Ed, Category III 1000 Volts AC & DC and
Category IV 600 Volts AC & DC.
• Disconnect the test leads from the test points before changing the
position of the function rotary switch.
• Never connect a source of voltage with the function rotary switch in
, , , μA, position.
• Do not expose Meter to extremes in temperature or high humidity.
• Never set the meter in , , , μA, function to measure the voltage
of a power supply circuit in equipment that could result in damage
the meter and the equipment under test.
2
Measurement category:
V : Category III 1000 Volts AC & DC, and Category IV 600 Volts AC & DC.
A : Category III 1000 Volts AC & DC, and Category IV 600 Volts AC & DC.
Per IEC 61010-1 3rd Ed. Measurement Category
Measurement Category IV (CAT IV) is for measurements performed at the
source of the low-voltage installation. Examples are electricity meters and
measurements on primary overcurrent protection devices and ripple control
units.
Measurement Category III (CAT III) is for measurements performed in
the building installation. Examples are measurements on distribution
boards, circuit- breakers, wiring, including cables, bus-bars, junction
boxes, switches, socket-outlets in the xed installation, and equipment for
industrial use and some other equipment, for example, stationary motors
with permanent connection to the xed installation.
WARNING
To reduce the risk of re or electric shock, do not expose this product to
rain or moisture. To avoid electrical shock hazard, observe the proper
safety precautions when working with voltages above 60 VDC or 30 VAC
rms. These voltage levels pose a potential shock hazard to the user. Do not
touch test lead tips or the circuit being tested while power is applied to the
circuit being measured. Keep your ngers behind the nger guards of the
test leads during measurement. Inspect test leads, connectors,
and probes for damaged insulation or exposed metal before using the
instrument. If any defects are found, replace them immediately. Only use
the accompanied test leads, or replace with the same rating or better.
UNPACKING AND INSPECTION
Your shipping carton should include:
1 Power clamp meter
1 Test leads (1 pair)
1 Temp. adapter and probe (for ACD-51NAV and ACDC-54NAV only)
1 Users Manual
1 Carrying case
1 9V alkaline battery (installed)
If any of the items are damaged or missing, return the complete package to
the place of purchase for an exchange.
FEATURES
• True RMS
• Measurements:
o Voltage up to 1000V AC/DC, Resistance, Frequency, THD (Total
Harmonics Distortion) and Individual Harmonics 1 to 25, Power,
Power Factor
o AC Current
- Up to 600A (ACD-50NAV, ACD-51NAV, ACDC-52NAV)
- Up to 1000A (ACD-53NAV, ACDC-54NAV)
4
Auto Power Off
A er idle inft 15 m
The meter can work again by turning it on from the OFF position.
Auto Power Off (APO) disable : DownwardPress “ ” of Navigator key while
tuning meter on from OFF position.
Navigator Key
R HTIGLEFT
DOWN
UP
ENTER
The Navigator Key has 5 directions of switch on the display, toggle the
navigator key to select the desired feature to activate the feature by a
simple click.
Making Basic Measurements
CAUTION
Before and after hazardous voltage measurements, test the voltage
function on a known source such as line voltage to determine proper meter
functioning.
When connecting the test leads to the EUT (Equipment Under Test) connect
the common test lead before connecting the live lead; when removing the
test leads, remove the test live lead before removing the common test lead.
5
Measuring Voltage
V
WARNING
To avoid electrical shock, hazard or damage to meter, do not attempt to
measurement that might exceed 1000 V DC or AC RMS. Do not apply more
than 1000 V DC or AC RMS to the input terminals.
Note - If the measured voltage is higher than 30 V DC or AC RMS, the
display will show “ ” symbol.
6
Measuring Current
OK
I
I+(-I)=0
OK
OK
I
I
I
I
- Don’t clamp on any conductor while the meter power on.
- ACD-50NAV, ACD-51NAV or ACD-53NAV has only AC current
measurement mode.
- Torch lighting when clamping.
CAUTION
Please do not measure current from clamp jaw when temperature probe is
connected to meter.
CAT IV 600V, CAT III
1000V with respect to
earth for the jaw. Tactile
Barrier for hand guard.
Do not hold the
meter across the Tactile
Barrier.
10
"MAXMIN"
"M MINAX "
"M MINAX "
"M MIN"AX
ENTER
MAXMIN >2sec
Note :
• Press HOLD key in MAX MIN mode to make the meter stop updating
the maximum and minimum value. When the HOLD mode is
activated in MAX MIN mode, the HOLD mode must be deactivated
before the MAX MIN mode.
THD Measurement (AC mode only)
Select the “THD” indicator then press the navigator key to enter the THD
mode. THD-F=RMS of Harmonics ÷ RMS of fundamental ×100%. (harmonics
up to the 25th)
"T "HD
"EN R"TE
13
2.Three Phase Power Measurement
A. 3 phase 3 wire balanced / unbalanced
Step 1. Set the rotary switch to the “W” position
Step 2. Using the Navigator key to choose the “W” mode.
Black
Red
Black
Wye or arst
32
1
Red
W= 2W1+W
B. 3 phase 4 wire balanced / unbalanced
Step1. Set the rotary switch to the “W” position
Step2. Using the Navigator key to choose the “W” mode.
3
2
1
N
Red
Black
Red
Black
Red
Black
W=W1 2+W3+W
16
Measuring Capacitance
Set the rotary switch to the “ “ position.
Ca citancepa
CAUTION
To avoid possible damage to the meter or to the equipment under test,
disconnect circuit power and discharge all high-voltage capacitors before
measuring capacitance. Use the DC voltage function to confirm that the
capacitor is discharged.
Note: The meter will display “diSC” while discharging the capacitor.

Produktspezifikationen

Marke: Amprobe
Kategorie: Messgeräte
Modell: ACD-51NAV

Brauchst du Hilfe?

Wenn Sie Hilfe mit Amprobe ACD-51NAV benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Messgeräte Amprobe

Amprobe

Amprobe RS-3-PRO Bedienungsanleitung

26 September 2024
Amprobe

Amprobe ACDC-100 Bedienungsanleitung

17 August 2024
Amprobe

Amprobe ACD-14PQ Bedienungsanleitung

8 August 2024
Amprobe

Amprobe ACD-23SW Bedienungsanleitung

2 August 2024
Amprobe

Amprobe TACH-10 Bedienungsanleitung

1 August 2024
Amprobe

Amprobe AMP-25-EUR Bedienungsanleitung

28 Juli 2024
Amprobe

Amprobe ACD-51NAV Bedienungsanleitung

27 Juli 2024
Amprobe

Amprobe RS-1007-PRO Bedienungsanleitung

27 Juli 2024
Amprobe

Amprobe TH-3 Bedienungsanleitung

23 Juli 2024
Amprobe

Amprobe ACD-6-PRO Bedienungsanleitung

20 Juli 2024

Bedienungsanleitung Messgeräte

Neueste Bedienungsanleitung für -Kategorien-

Stamos

Stamos S-LS-41 Bedienungsanleitung

16 Oktober 2024
Stamos

Stamos S-LS-58 Bedienungsanleitung

16 Oktober 2024
PCE Instruments

PCE Instruments LTS-20 Bedienungsanleitung

16 Oktober 2024
PCE Instruments

PCE Instruments PCE-313A Bedienungsanleitung

16 Oktober 2024
PCE Instruments

PCE Instruments PCE-320 Bedienungsanleitung

16 Oktober 2024
PCE Instruments

PCE Instruments PCE-032-LED Bedienungsanleitung

16 Oktober 2024
PCE Instruments

PCE Instruments FME Bedienungsanleitung

16 Oktober 2024
PCE Instruments

PCE Instruments PCE-2500N Bedienungsanleitung

16 Oktober 2024
PCE Instruments

PCE Instruments PCE-2550 Bedienungsanleitung

16 Oktober 2024
PCE Instruments

PCE Instruments PCE-2600N Bedienungsanleitung

16 Oktober 2024