American Recorder OAS-2000M Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr American Recorder OAS-2000M (2 Seiten) in der Kategorie Beleuchtung. Dieser Bedienungsanleitung war fĂŒr 28 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
OAS-2000M Series
rev 0318
American Recorder Technologies, Inc.
1872 Angus Ave., Simi Valley, CA 93063 USA
Toll Free: 888 611-3790 Voice: 805 527-9580 Fax: 805 527-1433 · ·
info@americanrecorder.com www.americanrecorder.com·
RoHS
Always consult your local municipality for
the proper disposal of electronic waste.
Ó 2018 American Recorder Technologies, Inc.
WALL MOUNT LED
INDICATOR SIGNS
For installation or technical questions:
PHONE: 1 805-527-9580 EMAIL: technical@americanrecorder.com
SPECIFICATIONS:
SIZE: 9”L x 5.5”H x 1.5”D 20 ea. bright white LED (50K hour op. life) LIGHTS:
ENCLOSURE MATERIAL: PANEL MATERIAL:Steel/aluminum Scratch resistant acrylic
OPERATION VOLTAGE: POWER CONSUMPTION: 9 ~ 24VDC 150mA
OPTIONS (not included):
FLASHER MODULE
4 BUTTON CONTROLLER WIFI SMART SOCKET
Flasher module will automatically flash sign ‘on’ and ‘off’ every
2 seconds. MODEL: OAS-FLASH
ON, OFF, AUTO FLASH (1.5 sec interval)
& MOMENTARY FLASH (push to flash,
off when released) buttons.
Simple 4 wire connection and small
size - 2.5” x 1.5” x 0.75”
MODEL: OAS-CON-4B
Use local WiFi network to power sign
ON/OFF using smartphone or tablet.
Plugs into any 110VAC outlet. FREE
app (available for iOS and android
devices)
MODEL: OAS-CON-WIFI
Congratulations on your purchase of an AMERICAN RECORDER
TECHNOLOGIES LED INDICATOR SIGN. INDICATOR SIGNS are the
perfect solution for alerting others that important broadcast, performance,
recording, lessons, rehearsals, services, conferences, interviews and
proceedings are in progress. This product utilizes a high-efficiency LED
design for long-use life and low energy consumption. The case has a sleek
and slim design and is easy to install. No special tools or equipment is
required for the installation.
Use only as intended. Should only be used by qualified individuals.
CAUTION: Risk of electrical shock! Do not use near water or if you are wet.
Intended for indoor use only. Use in dry, ventilated area free of excessive
dust, humidity, flammable materials, corrosive fumes and conductive contaminants.
Power supply is for 110-220 volt AC (input), 60 Hz to 9 volt DC (output). Can be
used with other 9 ~ 24VDC power sources (max 1 amp) only.
WARNING: Do not use if the powered cord or extension wire is worn or damaged.
PLASTIC LENS CARE: Do not use harsh chemicals, abrasives or glass cleaners
on the plastic lens. Use AMERICAN RECORDER Optical Grade Micro Fiber
Cleaning Cloth. Visit www.AmericanRecorder.com for more information.
KEEP THIS PRODUCT OUT OF THE REACH OF CHILDREN
The information contained in this document is subject to change without notice.
American Recorder Technologies, Inc. makes no warranty of any kind with regard
to this material, including, but not limited to, the implied warranties of merchant-
ability and fitness for a particular purpose. Not liable of errors contained herein or
for incidental or consequential damages in connection with the furnishing,
performance, or use of this material.
IMPORTANT SAFETY PRECAUTIONS
!
AMERICAN RECORDER TECHNOLOGIES, INC. (ART) includes with this product a
limited one year guarantee, free from defects in manufacture and workmanship to the
original owner. Warranty does not apply to misuse, abuse, neglect, accident, improper
use, etc. reserves the right to make such determination on the basis of factory inspection. ART
A valid return authorization number must be obtained from customer service department ART
for all factory warranty service. All warranty repairs must be returned prepaid. (COD's will be refused).
WARRANTY
Parts List: (1 ea.) LED Sign Box with Panel (1 ea.) 25’ Extension Cable
(1 ea.) Splice Block (1 set) Mounting Hardware
(1 ea.) 110~220vAC(input) to 9vDC (output) power supply
CONNECTIONS:
25' EXTENSION CABLE IF REQUIRED
110V ~ 220VAC
MOUNTING:
1. Find a location for mounting your sign. Usually the best location is above the door to the room or area where
the sign will warn others not to enter when the sign is lit.
2. With a ruler or tape measurer, measure and mark the wall area for the mounting holes which are 4-3/16”
apart. Additionally, a level can be used to assure your sign will be parallel to the door jam and ceiling.
3. For attachment directly to wood, drill a 1/8” hole and use the supplied #8 screws. For drywall, drill a 7/32”
hole and gently tap in supplied plastic retainers and then screw in the #8 screw into retainer.
4. The head of the screw should be spaced 1/4” away from the wall in order to allow the SIGN BOX’s keyhole
cutouts to slide over and down the back of the enclosure.
#8 Wood
screw Plastic
retainer
Tools required
4-3/16”
NOTE: DO NOT PLUG IN POWER SUPPLY INTO
WALL SOCKET UNTIL ALL CONNECTIONS HAVE
BEEN MADE. The power supply has a 6 foot cord.
A 25 foot extension wire and splice block is provided
for longer runs. Wires are color coded, red for
positive and black for negative, as shown in diagram.
NOTE: Care should be taken
when running cable through
door jams so wire does not
get pinched or damaged.
7/32”
Cordless
drill
Phillips
screwdriver
1/8”
FLASHER
MODULE
OPTIONAL ADD-ONS
POWER
SUPPLY
VV
VV
+ +
SPLICE BLOCK
SIGN
BACK
Keyhole cutouts V
V
VV
V
V
+9-24DC GND
UU
GND
GND
POWER
ON OFF FLASH
MOMENTARY
+ - + -
INPUT OUT PUT


Produktspezifikationen

Marke: American Recorder
Kategorie: Beleuchtung
Modell: OAS-2000M

Brauchst du Hilfe?

Wenn Sie Hilfe mit American Recorder OAS-2000M benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Beleuchtung American Recorder

Bedienungsanleitung Beleuchtung

Neueste Bedienungsanleitung fĂŒr -Kategorien-