American DJ SP4LED Bedienungsanleitung

American DJ Beleuchtung SP4LED

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für American DJ SP4LED (10 Seiten) in der Kategorie Beleuchtung. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/10

User Instructions

SP4LED Introduction

12/11

Unpacking: Thank you for purchasing the SP4LED by American DJ®.

Every SP4LED has been thoroughly tested and has been shipped in

perfect operating condition. Carefully check the shipping carton for

damage that may have occurred during shipping. If the carton appears

to be damaged, carefully inspect your xture for any damage and be

sure all accessories necessary to operate the unit has arrived intact. In

the case damage has been found or parts are missing, please contact

our toll free customer support number for further instructions. Do not

return this unit to your dealer without rst contacting customer sup-

port.

Introduction: The American DJ® SP4LED is part of a continuing pur-

suit to create high quality intelligent lighting and lighting control. The

SP4LED is a 4-Channel DMX switch pack designed to turn LED fixtures

on and off using a universal DMX controller. Up to 128 SP4LEDs may

be daisy-chained in one DMX chain. There are 8 power inputs on the

front of the controller to plug your lighting xtures into.

Customer Support: American DJ provides a customer support line,

to provide set up help and to answer any question should you encoun-

ter problems during your set up or initial operation. You may also visit

us on the web at www.American DJ.com for any comments or sugges-

tions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.

Pacic Standard Time.

Voice: (323) 582-3322

Fax: (323) 582-3108

E-mail: support@American DJ.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

American DJ.

PLEASE recycle the shipping carton when ever possible.

SP4LED Safety Precautions

• Five Operating Modes

• Built in Microphone

• DMX-512 protocol

• 3-Pin DMX Connection

• Up to 128 SP4LEDs may be Daisy-Chained together via DMX

• 3 DMX Channel Modes: 3 Channel Mode, 5 Channel Mode, & 7

Channel Mode

• ADJ LED RC Compatiable (Sold Separately)

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Be sure that the local power outlet match that of the required volt-

age for your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken. Do not attempt to remove or break o the ground

prong from the electrical cord. This prong is used to reduce the risk

of electrical shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out`

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to the point they exit from the unit.

• Cleaning -The fixture should be cleaned only as recommended by

t he manufacturer. See page 15 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances (inclu-

d ing amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally or exhibits a

marked change in performance.

SP4LED Warranty Registration

SP4LED Features

To optimize the performance of this product, please read these

operating instructions carefully to familiarize yourself with the basic

operations of this unit. These instructions contain important safety

information regarding the use and maintenance of this unit. Please

keep this manual with the unit, for future reference.

SP4LED General Instructions

The SP4LED two carries a year limited warranty. Please fill out the

enclosed warranty card to validate your purchase. All returned service

items whether under warranty or not, must be freight pre-paid and

accompany a return authorization (R.A.) number. The R.A. number

must be clearly written on the outside of the return package. A brief

description of the problem as well as the R.A. number must also be

written down on a piece of paper included in the shipping carton. If

the unit is under warranty, you must provide a copy of your proof of

purchase invoice. You may obtain a R.A. number by contacting our

customer support team on our customer support number. All pack-

ages returned to the service department not displaying a R.A. number

on the outside of the package will be returned to the shipper.

Power Supply: Before plugging your unit in, be sure the source

voltage in your area matches the required voltage for your American

DJ® SP4LED. The American DJ® SP4LED voltage is user selectable.

Because line voltage may vary from venue to venue, you should be

sure your unit voltage matches the wall outlet voltage before attempt-

ing to operate you xture.

DMX-512: DMX is short for Digital Multiplex. This is a universal pro-

tocol used as a form of communication between intelligent fixtures

and controllers. A DMX controller sends DMX data instructions from

the controller to the fixture. DMX data is sent as serial data that trav-

els from fixture to fixture via the DATA “IN” and DATA “OUT” XLR ter-

minals located on all DMX fixtures (most controllers only have a DATA

“OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models of

dierent manufactures to be linked together and operate from a single

controller, as long as all xtures and the controller are DMX compli-

ant. To ensure proper DMX data transmission, when using several

DMX fixtures try to use the shortest cable path possible. The order

in which fixtures are connected in a DMX line does not influence the

DMX addressing. For example; a fixture assigned a DMX address of 1

may be placed anywhere in a DMX line, at the beginning, at the end,

or anywhere in the middle. When a fixture is assigned a DMX address

of 1, the DMX controller knows to send DATA assigned to address 1

to that unit, no matter where it is located in the DMX chain.

Data Cable (DMX Cable) Requirements (For DMX Operation):

The SP4LED can be controlled via DMX-512 protocol. The SP4LED has

3 DMX channel modes, please see pages 8-10

for the dierent modes. Your unit and your DMX

controller require a standard 3-pin XLR connec-

tor for data input and data output (Figure 1). We

recommend Accu-Cable DMX cables. If you are

making your own cables, be sure to use standard

110-120 Ohm shielded cable (This cable may be

purchased at almost all pro lighting stores). Your

cables should be made with a male and female

XLR connector on either end of the cable. Also

remember that DMX cable must be daisy chained and cannot be split.

SP4LED Set Up

Figure 1

Notice: Be sure to follow gures two and three when making your own

cables. Do not use the ground lug on the XLR connector. Do not con-

nect the cable’s shield conductor to the ground lug or allow the shield

conductor to come in contact with the XLR’s outer casing. Grounding

the shield could cause a short circuit and erratic behavior.

SP4LED Set Up

DMX512 IN

3-PIN XLR

DMX +

DMX -

COMMON

DMX512 OUT

3-PIN XLR

Figure 2

Figure 3

1 Ground 1 Ground

XLR Male Socket

XLR Pin Conguration

3 Hot

2 Cold 2 Cold

3 Hot

XLR Female Socket

Pin 3 = Data True (positive)

Pin 2 = Data Compliment (negative)

Pin 1 = Ground

Special Note: Line Termination.

When longer runs of cable are

used, you may need to use a terminator on the last unit to avoid erratic

behavior. A terminator is a 110-120 ohm 1/4 watt resistor which is con-

nected between pins 2 and 3 of a male XLR connector (DATA + and

DATA -). This unit is inserted in the female XLR connector of the last

unit in your daisy chain to terminate the line. Using a cable terminator

(ADJ part number Z-DMX/T) will decrease the possibilities of erratic

behavior.

Termination educes signalr errors and

avoids signal transmission problems

and interference. It is always advisable

to connect a DMX terminal, (Resistance

120 Ohm 1/4 W) between PIN 2 (DMX-)

and PIN 3 (DMX +) of the last fixture. Figure 4

5-Pin XLR DMX Connectors.

Some manufactures use 5-pin DMX-

512 data cables for DATA transmission in place of 3-pin. 5-pin DMX

xtures may be implemented in a 3-pin DMX line. When inserting stan-

dard 5-pin data cables in to a 3-pin line a cable adaptor must be used,

these adaptors are readily available at most electric stores. The chart

below details a proper cable conversion.

Conductor 5-Pin XLR Male (In)3-Pin XLR Female (Out)

Pin 1

Do Not Use

Pin 3

Pin 2

Pin 1

Pin 3

Pin 2

Not Used

Data True (+ signal)

Data Compliment (- signal)

Ground/Shield

3-Pin XLR to 5-Pin XLR Conversion

Produktspezifikationen

Marke:	American DJ
Kategorie:	Beleuchtung
Modell:	SP4LED

Brauchst du Hilfe?

Wenn Sie Hilfe mit American DJ SP4LED benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Beleuchtung American DJ

American DJ SDC24 Bedienungsanleitung

25 Juni 2024

American DJ MyDMX5 Bedienungsanleitung

10 Juni 2024

American DJ S-81 LED Bedienungsanleitung

3 April 2024

American DJ Quad Gem DMX Bedienungsanleitung

8 November 2023

American DJ Flash Panel 16 Bedienungsanleitung

31 August 2023

American DJ SP4LED Bedienungsanleitung

15 November 2022

American DJ Freq 5 Bedienungsanleitung

7 November 2022

Bedienungsanleitung Beleuchtung

Neueste Bedienungsanleitung für -Kategorien-

Stairville BEL4 Battery Event Light 4x15W Bedienungsanleitung

21 August 2024

Maul Avior Bedienungsanleitung

15 August 2024

Black Diamond Spot R 400 Bedienungsanleitung

28 Juni 2024

Black Diamond Storm 450 Bedienungsanleitung

28 Juni 2024

Black Diamond Storm R 500 Bedienungsanleitung

28 Juni 2024

Black Diamond Cosmo R 350 Bedienungsanleitung

28 Juni 2024

Black Diamond Astro R 300 Bedienungsanleitung

28 Juni 2024

Black Diamond Icon 700 Bedienungsanleitung

28 Juni 2024

Black Diamond Spot 400 Bedienungsanleitung

28 Juni 2024

Louis Poulsen Panthella 160 Bedienungsanleitung

27 Juni 2024