American DJ Mega QA Go Bedienungsanleitung
American DJ
Lichteffektmaschine
Mega QA Go
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für American DJ Mega QA Go (16 Seiten) in der Kategorie Lichteffektmaschine. Dieser Bedienungsanleitung war für 31 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/16
User Instructions
10/16
Mega Qa go
©2016 ADJ Products, LLC all rights reserved. Information,
specications, diagrams, images, and instructions herein are
subject to change without notice. ADJ Products, LLC logo and
identifying product names and numbers herein are trademarks
of ADJ Products, LLC. Copyright protection claimed includes all
forms and matters of copyrightable materials and information
now allowed by statutory or judicial law or hereinafter granted.
Product names used in this document may be trademarks or
registered trademarks of their respective companies and are
hereby acknowledged. All non-ADJ Products, LLC brands and
product names are trademarks or registered trademarks of their
respective companies.
ADJ Products, LLC and all aliated companies hereby dis-
claim any and all liabilities for property, equipment, building,
and electrical damages, injuries to any persons, and direct or
indirect economic loss associated with the use or reliance of
any information contained within this document, and/or as a
result of the improper, unsafe, unsucient and negligent as-
sembly, installation, rigging, and operation of this product.
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment.
Please turn o all electrical products when they are not in use. To
avoid power consumption in idle mode, disconnect all electrical
equipment from power when not in use. Thank you!
ADJ Products, LLC - www.adj.com - Mega QA Go User Manual Page 3ADJ Products, LLC - www.adj.com - Mega QA Go User Manual Page 2
• Five Operating Modes
• Electronic Dimming 0-100%
• 5 Selectable Dimming Curves
• 64 Color Macros
• Built in Microphone
• DMX-512 protocol
• 3-Pin DMX Connection
• 8 DMX Modes: 1 Channel Mode, 2 Channel Mode, 3 Channel
Mode, 4 Channel Mode, 5 Channel Mode, 6 Channel Mode, 7
Channel Mode, & 8 Channel Mode.
• ADJ UC IR, (Not Included) & Airstream IR compatible
• Power Cord Daisy Chain (See page 26)
Mega QA Go Warranty Registration
Mega QA Go Features
The Mega QA Go 2 year limited warranty. Please fill out the carries a
enclosed warranty card to validate your purchase. All returned service
items whether under warranty or not, must be freight pre-paid and
accompany a return authorization (R.A.) number. The R.A. number
must be clearly written on the outside of the return package. A brief
description of the problem as well as the R.A. number must also be
written down on a piece of paper included in the shipping carton. If
the unit is under warranty, you must provide a copy of your proof of
purchase invoice. You may obtain a R.A. number by contacting our
customer support team on our customer support number. All pack-
ages returned to the service department not displaying a R.A. number
on the outside of the package will be returned to the shipper.
The unit should be mounted using a mounting clamp (not provided),
axing it to the mounting bracket that is provided with the unit.
Always ensure that the unit is rmly xed to avoid vibration and slip-
ping while operating. Always ensure that the structure to which you
are attaching the unit is secure and is able to support a weight of 10
times the unit’s weight. Also, always use a safety cable that can hold
12 times the weight of the unit when installing the xture.
The equipment must be installed by a professional, and it must be
installed in a place where it is out of the reach of people’s grasp.
Mega QA Go Installation
Mega QA Go Introduction
Unpacking: Thank you for purchasing the Mega QA Go by ADJ Prod-
ucts, LLC. Every Mega QA Go has been thoroughly tested and has
been shipped in perfect operating condition. Carefully check the ship-
ping carton for damage that may have occurred during shipping. If the
carton appears to be damaged, carefully inspect your xture for any
damage and be sure all accessories necessary to operate the unit has
arrived intact. In the case damage has been found or parts are miss-
ing, please contact our toll free customer support number for further
instructions. Do not return this unit to your dealer without rst contact-
ing customer support.
Introduction: The ADJ Mega QA Go is a DMX intelligent, high powered
LED par fixture. This xture can be used in a stand alone mode or con-
nected in a Master/Slave conguration. This wash has five operating
modes: Sound Active mode, Auto Run mode, RGBA Dimmer mode,
Static Color mode, and DMX control mode. To optimize the perfor-
mance of this product, please read these operating instructions care-
fully to familiarize yourself with the basic operations of this unit. These
instructions contain important safety information regarding the use and
maintenance of this unit. Please keep this manual with the unit, for
future reference.
Customer Support: ADJ Products, LLC provides a customer support
line, to provide set up help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.adj.com for any comments or sugges-
tions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.
Pacic Standard Time.
Voice: (323) 582-3322
Fax: (323) 582-3108
E-mail: support@AmericanDJ.com
Warning! To prevent or reduce the risk of electrical shock or re, do
not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
ADJ Products, LLC.
PLEASE recycle the shipping carton when ever possible.
Mega QA Go Safety Precautions
ADJ Products, LLC - www.adj.com - Mega QA Go User Manual Page 4 ADJ Products, LLC - www.adj.com - Mega QA Go User Manual Page 5
• To reduce the risk of electrical shock or re, do not expose this unit
rain or moisture
• Do not spill water or other liquids into or on to your unit.
• Do not attempt to operate this unit if the power cord has been
frayed or broken. Do not attempt to remove or break o the ground
prong from the electrical cord. This prong is used to reduce the risk
of electrical shock and re in case of an internal short.
• Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user
serviceable parts inside.
• Never operate this unit when it’s cover is removed.
• Never plug this unit in to a dimmer pack
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
• Do not attempt to operate this unit, if it becomes damaged.
• This unit is intended for indoor use only, use of this product out`
doors voids all warranties.
• During long periods of non-use, disconnect the unit’s main power.
• Always mount this unit in safe and stable matter.
• Power-supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them,
paying particular attention to the point they exit from the unit.
• Cleaning -The fixture should be cleaned only as recommended by
t he manufacturer. See page 31 for cleaning details.
• Heat -The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances (inclu-
d ing amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a
marked change in performance.
1. Handling of Batteries
1.1 Do Not Short Circuit the Battery
Try to never short circuit the battery. It generates a very high
current which could cause the battery to overheat which may
result in electrolyte gel leakage, harmful fumes, or explosion.
The LIR tabs may easily short-circuit by placing them on con-
ductive surface. A short circuit may lead to heat build up and
damage of the battery. An appropriate circuitry with PCM is
employed to protect accidental short circuit of the battery pack.
1.2 Mechanical shock
Droping the unit, impact hit, bending, etc. may cause failure or
shortend life of the LIR battery.
3. Other
3.1 Battery connection
1). Direct soldering of wire leads or devices to the battery is
strictly prohibited.
2). Lead tabs with pre-soldered wiring shall be spot welded to
the batteries. Direct soldering may cause damage of compo-
nents, such as separator and insulator, by heat build up.
3.2 Prevention of short circuit within a battery pack
There is enough insulation layers between wiring and the bat-
teries to provide extra safety protection. The battery pack is
constructed in a way that no short circuit will occur which may
cause smoke or re.
3.3 Do No Disassemble the Batteries
1). Never disassemble the batteries.
Doing this may cause a internal short circuit in the battery,
which may lead to harmful fumes, re, explosion, or other prob-
lems.
2). Electrolyte Gel is harmful
Electrolyte Gel should not leak from the LIR battery. Should the
electrolyte gel come into contact with the skin or eyes, ush the
Mega QA Go Battery Precautions
Produktspezifikationen
| Marke: | American DJ |
| Kategorie: | Lichteffektmaschine |
| Modell: | Mega QA Go |
Brauchst du Hilfe?
Wenn Sie Hilfe mit American DJ Mega QA Go benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Lichteffektmaschine American DJ
6 April 2024
17 März 2024
16 März 2024
21 Februar 2024
5 Dezember 2023
7 November 2023
25 September 2023
13 August 2023
16 November 2022
Bedienungsanleitung Lichteffektmaschine
- Lichteffektmaschine Manta
- Lichteffektmaschine Nedis
- Lichteffektmaschine Velleman
- Lichteffektmaschine Antari
- Lichteffektmaschine BeamZ
- Lichteffektmaschine Stairville
- Lichteffektmaschine Max
- Lichteffektmaschine Adj
- Lichteffektmaschine Behringer
- Lichteffektmaschine Eurolite
- Lichteffektmaschine Showtec
- Lichteffektmaschine Monoprice
- Lichteffektmaschine Lexicon
- Lichteffektmaschine Elation
- Lichteffektmaschine Cameo
- Lichteffektmaschine HQ Power
- Lichteffektmaschine Qtx
- Lichteffektmaschine JB Systems
- Lichteffektmaschine Martin
- Lichteffektmaschine TCM FX
- Lichteffektmaschine Futurelight
- Lichteffektmaschine Elysia
- Lichteffektmaschine Hazebase
- Lichteffektmaschine Chauvet
- Lichteffektmaschine Laserworld
- Lichteffektmaschine Klark Teknik
- Lichteffektmaschine Drawmer
- Lichteffektmaschine DJPower
- Lichteffektmaschine The Confetti Maker
- Lichteffektmaschine Blizzard
- Lichteffektmaschine ColorKey
- Lichteffektmaschine Lotronic
Neueste Bedienungsanleitung für -Kategorien-
20 August 2024
14 Juni 2024
12 Juni 2024
12 Juni 2024
28 Mai 2024
27 Mai 2024
26 Mai 2024
25 Mai 2024
24 Mai 2024