Aluratek AMAP01F Bedienungsanleitung

Aluratek Luftreiniger AMAP01F

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Aluratek AMAP01F (2 Seiten) in der Kategorie Luftreiniger. Dieser Bedienungsanleitung war für 28 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
Air Inlet
Sensor Air Outlet
Operation Panel
Air Quality Indicator
Filter Reminder
Air Quality
Timer Setting
Sleep
Timer Power
Speed
Open directly from the side
Speed Setting
qsg Q10607 Copyright © 2022 Aluratek, Inc. All Rights Reserved.
model AMAP01F
Quick Start Guide
HEPA H13 with PM2.5 Monitor
Air Purifier
Filter
Package Contents
Your order has been carefully packaged and inspected.
The following accessories should be included in your
package. Please inspect the contents of the package to
ensure that you have received all items and that nothing
has been damaged. If you discover a problem, please
contact us immediately for assistance.
Product Highlights Operation Operation
Filter Installation Purifier Instructions
Operation
Purifier Instructions
Operation
Filter maintenance WARNING!!! This equipment has been tested and
found to comply with the limits of a Class B digital
device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instruction, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by whatever measures may be
required to correct the interference.
Radio and TV Interference Statement Technical Support and Warranty
If you need further assistance, please contact the
Aluratek support department for troubleshooting
prior to returning this device.
E-mail: support@aluratek.com
Web: www.aluratek.com/helpdesk
Local (Irvine, CA): 714-586-8730
Toll free: 1-866-580-1978
Aluratek warrants this product against defect
in material or workmanship for 1 YEAR
from the date of purchase.
For more information, please visit:
https://aluratek.com/warranty-return-policy
You can register your product online at:
https://aluratek.com/product-registration
1. Remove the air inlet cover
2. Remove the filter
3. Remove the plastic bag from the filter and reinsert
4. Replace the air inlet cover
After the purifier is plugged in to a wall outlet, you will hear
a single beep with the display lights up for a second, then
it will go to standby mode where the display will be off with
the power button light up in red.
Air Quality indicator:
Green good means air quality
Yellow moderate means air quality
Red bad means air quality.
This purifier uses a Hepa Carbon filter. It is suggested to
be replaced every two months.
After a run time of 1500 hours, the purifier’s replacement
filter icon will light up.
• Place the filter in a ventilated place
• Do not expose to excessive sunlight
• Do not wash the filter with water
• Unplug the power plug before replacing the filter,
cleaning and maintenance
• Do not operate with the filter removed as this may cause
equipment failure
• Unplug the power cord when the purifier is idle for a long
period of time
To power on the purifier, press the power
button, the display will light up and the
purifier will enter auto mode.
When the purifier is on, you can press the
timer button to set the timer between 1-8
hours. You can verify the timer is set when
you see the timer icon lit on the display.
The timer can be cancelled by press and
hold the timer button for about 3 seconds.
You can change the speed of the fan by
pressing the fan icon to change between
auto (A), slow (1), medium (2), fast (4)
and sleep (SLE).
For Sleep mode, the fan speed will
change to slow with the display turned off
except the sleep icon. To exit sleep mode,
just touch the screen and change the fan
speed to other settings.
When the filter reminder icon is lit, please
change the filter. Once the filter is replaced,
during standby mode, press and hold the
filter button to reset the filter life counter.
To power off the purifier, press the power
button, the display will turn off and the
power button will light up in red.
Power
Timer
Speed
Sleep
Reset
Power
OFF

Produktspezifikationen

Marke: Aluratek
Kategorie: Luftreiniger
Modell: AMAP01F

Brauchst du Hilfe?

Wenn Sie Hilfe mit Aluratek AMAP01F benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Luftreiniger Aluratek

Aluratek

Aluratek AMAP01F Bedienungsanleitung

13 August 2024

Bedienungsanleitung Luftreiniger

Neueste Bedienungsanleitung für -Kategorien-

Trotec

Trotec TAC 5000 Bedienungsanleitung

16 Oktober 2024
Duux

Duux DXPU07 Bright Bedienungsanleitung

16 Oktober 2024
Taurus

Taurus AP2030 Bedienungsanleitung

16 Oktober 2024
TruSense

TruSense Z-2000 Bedienungsanleitung

16 Oktober 2024
Ulsonix

Ulsonix AIRCLEAN 20G Bedienungsanleitung

16 Oktober 2024
Philips

Philips AC5602 Bedienungsanleitung

15 Oktober 2024
Winix

Winix AUS-5500 Bedienungsanleitung

14 Oktober 2024
Homedics

Homedics AR-35 Bedienungsanleitung

14 Oktober 2024
Vax

Vax AP02 Bedienungsanleitung

10 Oktober 2024
Whynter

Whynter AFR-300 Bedienungsanleitung

10 Oktober 2024