Aluratek ABS02F Bedienungsanleitung

Aluratek Lautsprecher ABS02F

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Aluratek ABS02F (1 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/1

Bluetooth Wireless Speaker - Speakerphone

aluratek.com

Quick Start Guide

ABS02F

Product Application

Operation

Note: The pairing mode will last 2 minutes. ABS02F will switch to the standby mode automatically if

no devices can be connected within 2 minutes.

Pairing with the transmitter such as iPhone, smart phone, and tablet:

Please make sure the device supports A2DP profile. The pairing procedure will vary

depending on the actual device. Please refer to the user guide of your device for

detail instruction. The general pairing procedures are as follows:

1. Make sure ABS02F is turned ON.

2. Activate ABS02F pairing mode by press and hold the button for 10 seconds.

(you will hear 3 audio tones and the blue LED will flash rapidly)

3. Activate your device’s Bluetooth function and set your device to search for Bluetooth

devices. Select ABS02F when it is found.

4. For transmitter with Bluetooth version 2.1, you will not need to input a code. If you

are prompted for PIN, please enter “0000”.

5. If prompted by your device to connect, please select “Yes”.

6. After connecting successfully, the blue LED will flash every 5 seconds.

Note: Please make sure the audio output is set to Bluetooth / ABS02F for audio streaming from the device.

For more information, please visit: http://aluratek.com/warranty-return-policy

You can register your product online at: http://aluratek.com/product-registration

E-mail: support@aluratek.com

Web: www.aluratek.com/support

Local (Tustin, CA): 714-586-8730

Toll free: 1-866-580-1978

Aluratek warrants this product against defect in material or workmanship for

1 Year from the date of purchase.

If you need further assistance, please contact the Aluratek support department for

troubleshooting prior to returning this device.

Tech Support & Warranty Information

Operation

Charging the battery

The battery is not fully charged and it is highly recommended that you charge ABS02F

before you begin using it

Note: Using ABS02F “out of the box” will not harm the device. You will experience reduced battery life as the

unit will not be fully charged.

Connect the larger USB end of the cable provided to your PC / power adapter.

Connect the smaller USB end to charging port of ABS02F. Please charge the battery

for a minimum of (4) hours. The Red LED will be on while charging. When charging

is complete, the red LED will turn off.

Function Operation LED Indicator

Power On Switch the power button to ON Red LED ON

Radio and TV Interference Statement

WARNING!!! This equipment has been tested and found to comply with the limits of a

Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by whatever measures may be

required to correct the interference.

Volume control

Charge the built-in

lithium ion battery

with the included

USB cable

On - Oﬀ switch

Connect any MP3 Player

with a 3.5mm auxiliary

audio output

(2W x 2) Speakers

Microphone: Pair with

your smartphone to use as

a wireless speakerphone

Forward / Backward

Play / Pause / Pair / Connect

and Disconnect incoming call

Enter Pairing

Mode

Ensure ABS02F is turned ON. Press and

hold button for 10 seconds. You

will hear 3 audio tones

Blue LED flashes

every 5 seconds

Enable

Bluetooth

(after Power

ON / OFF)

Ensure ABS02F is turned ON. Press and

hold button for 7 seconds.

Blue LED flashes

rapidly

Produktspezifikationen

Marke:	Aluratek
Kategorie:	Lautsprecher
Modell:	ABS02F
Bluetooth:	Ja
Bluetooth-Profile:	A2DP
Kopfhörer-Anschluss:	3,5 mm
Akku-/Batteriebetriebsdauer:	10 h
Mitgelieferte Kabel:	AUX, USB
Produktfarbe:	Schwarz
3,5-mm-Anschluss:	Ja
Übertragungstechnik:	Kabellos
Akkuladezeit:	3.5 h
Akku-/Batterietechnologie:	Lithium-Ion (Li-Ion)
Garantiekarte:	Ja
Energiequelle:	Akku
Stecker:	AUX, USB
RMS-Leistung:	2 W
Schnellstartübersicht:	Ja
Plug & Play:	Ja
Audio Kanäle:	1.0 Kanäle
Anzahl unterstützter Akkus/Batterien:	1
Anzahl des Antriebs:	1
Frequenzbereich:	100 - 20000 Hz
Ein-/Ausschalter:	Ja
Mikrofon-Eingang:	Ja
Woofer:	Nein
Akkus/Batterien enthalten:	Ja
Kompatible Produkte:	Apple iPhone, iPad
Lautsprecherplatzierung:	Tragbar
Kompatibilität:	Apple iPhone, iPad
Stromeingang:	Ja
Apple-Docking-Kompatibilität:	Nicht unterstützt