Aluratek ABHS02F Bedienungsanleitung
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Aluratek ABHS02F (1 Seiten) in der Kategorie Helm. Dieser Bedienungsanleitung war fĂĽr 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/1
Package Contents Product Highlights
Operation Operation
WARNING!!! This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by whatever measures may be
required to correct the interference.
Radio and TV Interference Statement
Aluratek warrants this product against defect in material or workmanship for 1 YEAR
from the date of purchase.
This warranty becomes invalid if the factory-supplied serial number or "warranty void" sticker has
been removed or altered on the product.
This warranty does not cover:
A) Cosmetic damage or damage due to acts of God
B) Accident, misuse, abuse, negligence or modification of any part of the product.
C) Damage due to improper operation or maintenance, connection to improper equipment,
or attempted repair by anyone other than Aluratek.
D) Products sold AS IS or WITH FAULTS.
IN NO EVENT SHALL ALURATEK'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT
FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THE PRODUCT, IT'S ACCOMPANYING SOFTWARE, OR
IT'S DOCUMENTATION.
Aluratek makes no warranty or representation, expressed, implied, or statutory, with respect to it's
products, contents or use of this documentation and all accompanying software, and specifically
disclaims it's quality, performance, merchantability, or fitness for any particular purpose. Aluratek
reserves the right to revise or update it's product, software or documentation without obligation to
notify any individual or entity.
Warranty
qsg Q10571 Copyright © 2020 Aluratek, Inc. All Rights Reserved.
aluratek.com
model ABHS02F
Quick Start Guide
Bluetooth Wireless Stereo Headset with Boom Mic
Technical Support
If you need further assistance, please contact the Aluratek support department for
troubleshooting prior to returning this device.
E-mail: support@aluratek.com
Web: www.aluratek.com/helpdesk
Local (Irvine, CA): 714-586-8730
Toll free: 1-866-580-1978
Your order has been carefully packaged and inspected. The following accessories should
be included in your package. Please inspect the contents of the package to ensure that
you have received all items and that nothing has been damaged. If you discover a problem,
please contact us immediately for assistance.
Operation
Operation
Pairing with a Smartphone
1. Press and hold MFB for 4 seconds, LED will turn to blue for 1 second, Power ON:
the Bluetooth Headset is now ON.
2. Press and hold MFB for 4 seconds, LED will turn to red for 1 second, Power OFF:
the Bluetooth Headset is now OFF.
3. Make sure ABHS02F is OFF. Press and hold MFB for 7 seconds. Pairing Mode:
Blue LED will flash a few times, then the red/blue LED will flash alternately, the
headset is now in pairing mode.
4. Press MFB Answer a call:
5. Press MFB End a call:
6. Press and hold MFB for 2 seconds and release after hearing tone.Reject a call:
7. In standby mode, rapidly press MFB twice. Redial last outgoing call:
8. In conversation or music mode, roll dial towards + and hold to increase Volume +:
volume, continue holding to further increase volume.
1. Make sure ABHS02F is OFF.
2. Press and hold MFB for 7 seconds until blue and red LED flashes alternately.
3. Follow the operating instructions for your smartphone and enable bluetooth
pairing mode.
4. Select ABHS02F in the list, then click Connect.
5. If asked for a password or PIN, enter 0000, and press “Yes” or “Confirm”. If the
connection is successful, a blue LED will flash every 10 seconds. If the pairing is
unsuccessful, the LED will keep flashing red & blue alternately. Try and pair again.
Pairing with Window System with Bluetooth
1. Make sure ABHS02F is OFF
2. Press and hold MFB for 7 seconds until blue and red LED flashes alternately.
3. Go to Start > Settings > Devices > Bluetooth & other devices > Add Bluetooth or other
device > Bluetooth
4. Select ABHS02F in the list, then click Connect.
5. If asked for a password or PIN, enter 0000 and press “Yes” or “Confirm”. If the
connection is successful, a blue LED will flash every 10 seconds. If the pairing is
unsuccessful, the LED will keep flashing red & blue alternately. Try and pair again.
Pairing with Mac System with Bluetooth
Charging and Low Battery Warning
1. Make sure ABHS02F is OFF
2. Press and hold MFB for 7 seconds until blue and red LED flashes alternately.
3. Go to Apple menu > System Preferences, then select “Bluetooth”.
4. Select ABHS02F in the list, then click Connect.
5. If asked for a password or PIN, enter 0000 and press “Yes” or “Confirm”. If the
connection is successful, a blue LED will flash every 10 seconds. If the pairing is
unsuccessful, the LED will keep flashing red & blue alternately. Try and pair again.
While charging, a red LED will be illuminated. When charging is complete, the red LED
will turn off. Low power is indicated by a red LED light flashing once every 30 seconds.
The device will need to be charged and will power off automatically after 5-10 minutes.
10. In conversation or music mode, roll dial towards – and hold to decrease Volume - :
volume, continue holding to further decrease volume.
11. In music mode, press Play/Pause button.Play/Pause:
12. In music mode, click "Vol+" Forward:
13. In music mode, click "Vol-" Backward:
14. Press MFB and Play/Pause buttons at the same time. Repeat procedure to Mute:
cancel mute function.
Operation Operation
USB Charging Cable 3.5 mm Cable Bluetooth Dongle
LED Indicator Status
LED Indicator Status
ON Blue LED flash 1 second
OFF Red LED flash 1 second
Unconnected standby
mode Blue LED flashes twice every 5 seconds
Connected standby
mode Blue LED flashes once every 10 seconds
Pairing Mode LED flashes red & blue continuously
* To use ABHS02F as a wired 3.5mm headset, please use the included micro USB
cable to 3.5mm cable
If your computer system does not have Bluetooth, please insert the included Bluetooth
adapter before following the steps below for the pairing. Most OS will download the
driver automatically. If not, please visit www.aluratek.com product page to download
the driver.
VOL+
Play/Pause
VOL-
Charging Jack / Wired Headset Connector
(Micro USB)
Multifunction
Button (MFB)
Microphone
LED
Produktspezifikationen
| Marke: | Aluratek |
| Kategorie: | Helm |
| Modell: | ABHS02F |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Aluratek ABHS02F benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Helm Aluratek
9 August 2024
Bedienungsanleitung Helm
Neueste Bedienungsanleitung fĂĽr -Kategorien-
29 Mai 2023