Alto AEQ215 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Alto AEQ215 (52 Seiten) in der Kategorie Hi-Fi-Anlage. Dieser Bedienungsanleitung war fĂĽr 32 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/52
AEQ215
USER GUIDE
ENGLISH ( 3 – 10 )
GUĂŤA DEL USUARIO
ESPAÑOL ( 11 – 18 )
GUIDE D’UTILISATION
FRANÇAIS ( 19 – 26 )
GUIDA PER L'USO
ITALIANO ( 27 – 34 )
BENUTZERHANDBUCH
DEUTSCH ( 35 – 42 )
GEBRUIKERSHANDLEIDING
NEDERLANDS ( 43 – 50 )
3
USER GUIDE (ENGLISH)
BOX CONTENTS
• AEQ215
• Power Cable
• User Guide
• Safety & Warranty Information Booklet
1. Make sure all items listed in the BOX CONTENTS section are included in the box.
2. READ THE SAFETY & WARRANTY INFORMATION BOOKLET BEFORE USING THE PRODUCT.
CAUTION! Permanent hearing loss may be caused by exposure to extremely high noise levels. The U.S.
Government's Occupational Safety and Health Administration (OSHA) has specified permissible exposures to certain
noise levels.
According to OSHA, exposure to high sound pressure levels (SPL) in excess of these limits may result in hearing
loss. When using equipment capable of generating high SPL, use hearing protection while such equipment is under
operation.
INTRODUCTION
Thanks for purchasing the Alto Professional AEQ215! AEQ215 gives precise and reliable sound-shaping control. It’s
built to last and perfect for any pro audio application, offering the essential EQ features you need for either
straightforward spectral balancing or enhancing particular sonic characteristics. Use it for studio recording, live sound
and everything in between.
• Balanced XLR, 1/4” TRS, and unbalanced RCA input and output connectors
• Standard 20 mm center-detented sliders allow easy frequency adjustment
• Constant Q filtering provides accurate and predictable EQ response
• Selectable boost/cut range of 6 dB or 12 dB for more precise gain control
• High-pass filter: 40 Hz (12 dB/octave)
• Low-pass filter: 16 kHz (12 dB/octave)
• 2/3-octave spacing
• Variable input level control
• EQ bypass switch on both channels
• Clip level indicators
• Ground lift switch to disconnect signal ground from chassis ground
SETUP
1. Plug all devices into an appropriate power source.
2. Connect the left and right main outputs of a mixer into Channel 1 and Channel 2 XLR or 1/4” inputs on the back
of AEQ215.
3. Connect another pair of cables to the Channel 1 and Channel 2 XLR or 1/4” outputs of AEQ215 and plug them
into your amplifier or a pair of powered speakers.
4. Press the Power switch on AEQ215 to power up the unit.
5. Begin playing your source material. Gradually bring up the mixer’s main faders until the Input Level meter lights
up near 0 dB. If the SIG CLIP LEDs light up, back the mixer’s output level down until they stop lighting up.
6. Adjust the EQ bands to your taste.
HOURS PER DAY SPL EXAMPLE
8 90 Small gig
6 92 Train
4 95 Subway train
3 97 High level desktop monitors
2 100 Classical music concert
1.5 102 Riveting machine
1 105 Machine factory
.50 110 Airport
.25 or less 115 Rock concert


Produktspezifikationen

Marke: Alto
Kategorie: Hi-Fi-Anlage
Modell: AEQ215

Brauchst du Hilfe?

Wenn Sie Hilfe mit Alto AEQ215 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Hi-Fi-Anlage Alto

Bedienungsanleitung Hi-Fi-Anlage

Neueste Bedienungsanleitung fĂĽr -Kategorien-