Altec Lansing CLAW 2.1 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Altec Lansing CLAW 2.1 (1 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
AL-SND325F-001
USER MANUAL
SAFETY PRECAUTIONS
INSTRUCTION FOR USE REMOTE CONTROLLER
Declaration of conformity RTTE:
MARKET MAKER BRAND LICENSING
HELPLINE 0811 482 202
81 ROUTE NATIONALE 7
69570 DARDILLY-FRANCE
BUTTON FUNCTION
KEY FEATURES
OPERATION
2.USING CABLE
3.CARE AND MAINTENANCE
1.CONNECT USING BLUETOOTH TECHNOLOGY
WARRANTY CONDITIONS
REASONS FOR WARRANTY EXCLUSIONS: PACKAGE CONTENTS
GETTING STARTED
INSTALLATION
TECHNICAL SPECIFICATION
PARTS IDENTIFICATION
.Read these safety instructions before using your device and store them for possible
future reference.
.If the adaper cord is damaged,have it repaired by the manufacturer,its service or a
similarly qualified person in order to avoid any hazard.
.The power supply must be replaced by a new one in case of malfunction,because this
power supply is not repairable.
.The socket-outlet shall be installed near the equipment and shall be easily accessible.
.The adapter is not intended for use by persons(including children)with reduced
physical,sensory or mental capacity.Persons who have not read the manual,unless they
have received explanations by a person responsible for their safety and supervision
should not use this unit.
.Children should be monitored to ensure that they do not play with the adapter.
.The device should always be readily accessible.
.The device should not be exposed to dripping or splashing water.
.No objects filled with liquids such as vases shall be placed on the device.
.Always leave a minimum distance of 10 cm around the unit to ensure sufficient
ventilation.
.Open flame sources,such as candles,should not be placed on top of the device,
.The device is intended for use only in a temperate climate.
.At full volume,prolonged listening to the portable audio device may damage the user’s
hearing and cause hearing troubles(temporary or pemanent deafness,hearing drone,
tinnitus,hyperacusis).
So we recommend not to listen to the portable audio device at high audio volume
and no more than one hour per day at medium audio volume.
.CAUTION:Danger of explosion if battery is incorrectly replaced or not replaced by the
same type or equivalent.
.The battery should not be exposed to excessive heat such as sunshine,fire or similar.
.Different types of batteries,new and used batteries should not be mixed.
.The battery must be installed according to the polarity.
.If the battery is wom,it must be removed from the product.
.The battery must be disposed of safely.Always use the collection bins provided
(check with your dealer)to protect the environment.
.This product is guaranteed for 1 year against defects in manufacturing or assembly.
.This guarantee only applies to the primary purchase by the end user.It does not cover
issues related to improper handling by the user.Proof of purchase is required in order to
render the warranty valid.
.The warranty does not cover problems associated with improper use,whether it is a result
of negligence,processing,failure to store properly(excessive heat or humidity),improper
installation or unauthorizedrepairs.
.The manufacturer is contractually required to repair or replace the defective product.
ALTEC is under no financial obligation to pay any amount in excess of that paid by the
end user.
Turn ON the unit
Press bluetooth button on the remote controller
Press“SYNC”on the remote controller to go into pairing mode.LED indicator lights keep
blinking once the unit goes on pairing mode.
activate the bluetooth function on your bluetooth device(mobile phone or tablet).
please refer to manufacturer’s instructions for instructions on enabling bluetooth
on your device.
Once you have activated bluetooth on your device,select the(AL-SND325F-001)from
the list of available bluetooth devices.
If required,enter the password‘0000’ to confirm pairing.
Once paired successfully,the LED flashes green,until the unit remains paired.
Choose music from your bluetooth device and play music wireless throuth the speakers.
Turn ON the unit
Connect the 3.5mm stereo cables to the output port on your MP3/MP4/Cell phone/
tablet/Computer sound card(The cable end is color coded to match the output jack
on most sound cards-green color for speaker and red color for microphone).
Note:While connecting through auxiliary,green jack should be connected to the auxiliary port
of your music device.
Turn on your computer(or portable audio device).open media player such as windows
media player,etc,click on PLAY to start playing your music.
Adjust the volume,bass and treble using the remote controller to a comfortable
Listening level.make sure the volume on your speaker system,in your music software and the
main volume control in your operating system are all at an audible level(if any one of these
volume levels are set to the lowest settings,you will not have sound coming from the speakers).
Note:
While connected throuth auxiliary,all the media(Previous track/Next track)can be controlled
using the source device(MP3/MP4/Cell phone/Table etc.)
Read the following recommendations before using the bluetooth multi media speaker system.
following these you will be able to enjoy the product for many years.
Do not expose the unit to liquid,moisture or humidity to avoid the product’s internal circuit
being affected.
Don’t use abrasive cleaning solvents to clean the unit.
Don’t expose the unit to extremely high or low temperature ad this will shorten the life of
electronic devices,destroy the battery or distort certain pladtic parts.
Don’t dispose of the unit in fire as it will result in an explosion.
Don’t expose the unit to contact with sharp objects as this will cause scratches and damage.
Don’t let the unit fall down onto the floor.The internal circuit might get damaged.
Don’t attempt to disassemble and repair the unit.Only qualified personnel
.Expired warranty period
.No proof of purchase
.Visible damage/breakage
.Oxidation
.Improper use
.Use of non-approved accessories
.Product altered,repaired or modified by an unauthorized third party
.Missing or altered serial number
.Warranty voided due to broken or altered packaging
.Damage due to accident,neglect,improper maintenance/care or force majeure
.Damage due to the installation of third-party software or a virus.
Sub-woofer
Satellite speakers-left & right
Remote control
Power adaptor
Instruction manual
1.Place the left and right satellite speakers next to the sub-woofer
2.Connect the satellite speakers to the appropriate connector on the back of the
sub-woofer.It should be connected on the 6(shown on figure I)speaker connection jack.
3.Connect the power adapter to the DC input jack 5(shown on figure I)and to a standard 
AC electrical outlet(a surge protector is recommended to protect your new bluetooth multi
media speaker system).
4.Power ON the unit using the power ON/OFF switch 4(shown on figure i)on the back 
of the sub-woofer.Also press power on button ON the remote controller.
you can now start using the BLUETOOTH 2.1 MULTI MEDIA SPEAKER SYSTEM
Remove the unit from the box.
Remove any packaging from the product.
Please retain all packaging until you have checked and counted all the parts and
the contents
Against the parts list.
2.1 bluetooth speaker
Power:DC 12V 1125mA
Watts sub-woofer
6x2 watts satellite speakers
Total 12 watts sound output
Adaptor technical data:
input:AC 230V/50Hz
Output:DC12V 1125mA
1.Lcd indicator
2.Volume control
3.Air duct
4.Power ON/OFF switch
5.AC input jack
6.Speaker connection jack
7.Microphone input jack
8.Headphone jack
9.Auxiliary jack
10.Satellite connection cable
11.Wireless remote control
Power ON/OFF Pressing this button turns ON or OFF the unit
To avoid possible hearing damage,do not listen at high audio volume for
long periods of time.
Market Maker Brand Licensing,herby declares that this equipment,
conforms to the essential requirements and other relevant provisions of
directive 1999/5/CE.The declaration of conformity can be viewed at the
following address:
Please visit us at www.alteclansing.com
Produt features,specifications and appearances
are subject to change without notice. 2015 Alte c Lansing/AL Infinity,LLC.
All rights reserved.
ALTEC,ALTECLANSING,the Altec
Lansing logo are marks of Altec
Lansing/AL Infinity LLC
Market Maker Brand Licensing
81ROUTE NATIONALE 7
69570 DARDILLY.
The European directive 2002/96/CE on Waste Electrical and Electronic
Epuipment(WEEE),requires that old household electrical appliances must
not be disposed of in the normal unsorted municipal waste stream.Old
appliances must be collected separately in order to optimize the recovery
and recycling of the materials they contain,and reduce the impact on
human health and the environment.The crossed out“wheeled bin”symbol
on the product reminds you of your obligation,that when you dispose of
the appliance,it must be separately collected.Please visit us at
www.alteclansing.com
Pressing this button mutes the system
Pressing this button enables unit into bluetooth mode
Press this button once puts the unit
bluetooth pairing mode
Press this button when you are paired with bluetooth.
This will paly previous track
Press this button when you are paired with bluetooth.
This will paly or pause the current track
Press this button when you are paired with bluetooth.
This will paly next track
Pressing this button enables AUX mode-wired connection
thecomputer or any other portable audio device connected
using wires,is activated.
Mute
AUX
Previous track
Play/Pause
Next track
Increase volume This will increase the volume
Increase treble This will increase the treble
Decrease treble This will decrease the treble
Increase bass This will crease the bass
Decrease bass This will decrease the bass
Bluetooth multi media speakers
Compatible with all bluetooth enabled devices such as smart phones,tablets,Computers Etc.
Wired connection also available for computers,netbooks,laptops etc
Syncs in seconds
Digital volume indicator
Wireless remote controller included
Wireless range≥6 meters(33 feet)
Bluetooth pairing name:AL-SND325F-001
Decrease volume This will decrease the volume
Bluetooth
Pairing modein
Bluetooth


Produktspezifikationen

Marke: Altec Lansing
Kategorie: Lautsprecher
Modell: CLAW 2.1

Brauchst du Hilfe?

Wenn Sie Hilfe mit Altec Lansing CLAW 2.1 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher Altec Lansing

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung fĂźr -Kategorien-