Allen & Heath RPS9 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Allen & Heath RPS9 (7 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/7
RPS9
RACK MOUNT
POWER SUPPLY
USER
GUIDE
PUBLICATION AP0334
2
Warranty
LIMITED ONE YEAR WARRANTY
This product has been manufactured in the UK by ALLEN & HEATH and is warranted to be free from defects in materials or
workmanship for a period of one year from the date of purchase by the original owner.
To ensure the high level of performance and reliability for which this equipment has been designed and manufactured please read
the User Guide before use.
In the event of a failure notify and return the defective unit to ALLEN & HEATH or its authorised agent as soon as possible for
repair under warranty subject to the following conditions:
CONDITIONS OF WARRANTY:
1. The product has been installed and operated in accordance with the instructions in the installation instructions in the User
Guide.
2. The product has not been subject to misuse either intended or accidental, neglect, or alteration other than as described in the
installation instructions in the User Guide or approved by ALLEN & HEATH.
3. Any necessary adjustment, alteration, or repair has been made by ALLEN & HEATH or it's authorised agent.
4. The defective unit is to be returned carriage prepaid to ALLEN & HEATH or it's authorised agent with proof of purchase.
5. Units to be returned should be packed to avoid transit damage.
These terms of warranty apply to UK sales. In other territories the terms may vary according to legal requirements.
Allen & Heath Agent:
ALLEN & HEATH.
Kernick Industrial Estate,
Penryn,
Cornwall.
England.
TR10 9LU
www.allen-heath.com
Tel: 01326 372070
Fax: 01326 377097
A division of Harman International Industries Ltd.
copyright © 1999 ALLEN & HEATH. All rights reserved.
Publication AP0334 Issue 3
IMcB 9-8-99
Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor.
ALLEN & HEATH shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained
in this manual.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by means, electronic,
electrical, mechanical, optical, chemical, including photocopying and recording, for any purpose without the express written
permission of ALLEN & HEATH.
It is recommended that all maintenance and service on the product should be carried out by ALLEN & HEATH or its authorised
agents. ALLEN & HEATH cannot accept any liability whatsoever for any loss or damage caused by service, maintenance or repair
by unauthorised personnel.
3
RPS9 Power Supply
INTRODUCING THE RPS9
The RPS9 is a linear power supply which, like other linear supplies, produces DC voltages by rectifying, smoothing and regulating
AC voltages from the secondary windings of a mains transformer.
Allen & Heath mixing consoles employ a number of DC voltage supply levels in their operation and these are provided at the
output of the power supply unit.
Precautions and Safety instructions
General Precautions
Avoid storing or using the RPS9 in conditions of excessive heat or cold, or in positions where it is likely to be subjected to
vibration, dust or moisture. Do not use any liquids to clean the exterior of the unit. A soft, dry cloth or brush is ideal.
SOLVENTS MAY CAUSE DAMAGE TO PAINT OR PLASTIC PARTS
Handling and Transport
The RPS9 is supplied in a specially designed cardboard box. If it is necessary to move the unit any distance after installation, it is
recommended that this carton is used to protect it. Be sure to disconnect all cabling before moving. If the RPS9 is to be moved
regularly (e.g. touring) it is recommended that it is installed in a foam lined case. At all times avoid applying excessive force to any
switches or connectors.
OFF
ON
POWER
Warning to the User/Installer/Service Engineer
Allen & Heath warns that any unauthorised changes or modifications to the RPS9 unit may invalidate the
legal compliance of the unit and could void the user’s authority to operate the equipment.
IMPORTANT: Please read this manual carefully before connecting your
RPS9 power supply to mains electricity.
This product complies with the European Electromagnetic Compatibility directives 89/336/EEC & 92/31/EEC
and the European Low Voltage directive 73/23/EEC & 93/68/EEC.


Produktspezifikationen

Marke: Allen & Heath
Kategorie: Nicht kategorisiert
Modell: RPS9

Brauchst du Hilfe?

Wenn Sie Hilfe mit Allen & Heath RPS9 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Allen & Heath

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-