Allen & Heath PA12 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Allen & Heath PA12 (36 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/36
USER GUIDE
USER GUIDE
USER GUIDE
USER GUIDEUSER GUIDE
Publication AP5195
PA Series
PA Series
PA Series
PA Series PA Series
Unpowered Version
2 PA User Guide
This product complies with the European Electromagnetic
Compatibility directives 89/336/EEC & 92/31/EEC and the
European Low Voltage Directives 73/23/EEC & 93/68/EEC.
This product has been tested to EN55103 Parts 1 & 2 1996 for use in
Environments E1, E2, E3, and E4 to demonstrate compliance with the
protection requirements in the European EMC directive 89/336/EEC. During
some tests the specified performance figures of the product were affected. This
is considered permissible and the product has been passed as acceptable for
its intended use.
Allen & Heath has a strict policy of ensuring all products are tested to the latest
safety and EMC standards. Customers requiring more information about EMC
and safety issues can contact Allen & Heath.
NOTE: Any changes or modifications to the console not approved by Allen &
Heath could void the compliance of the console and therefore the users
authority to operate it.
PA Series (unpowered) User Guide AP5195 Issue 4
Copyright © 2005 Allen & Heath Limited. All rights reserved
Whilst we believe the information in this guide to be reliable we do not assume
responsibility for inaccuracies. We also reserve the right to make changes in
the interest of further product development.
Allen & Heath Limited
Kernick Industrial Estate, Penryn, Cornwall, TR10 9LU, UK
http://www.allen-heath.com
Limited One Year Warranty
This product is warranted to be free from defects in materials or workmanship for period of
one year from the date of purchase by the original owner.
To ensure a high level of performance and reliability for which this equipment has been
designed and manufactured, read this User Guide before operating.
In the event of a failure, notify and return the defective unit to ALLEN & HEATH Limited or
its authorised agent as soon as possible for repair under warranty subject to the following
conditions
Conditions Of Warranty
1. The equipment has been installed and operated in accordance with the instructions in
this User Guide.
2. The equipment has not been subject to misuse either intended or accidental, neglect,
or alteration other than as described in the User Guide or Service Manual, or approved
by ALLEN & HEATH.
3. Any necessary adjustment, alteration or repair has been carried out by ALLEN &
HEATH or its authorised agent.
4. This warranty does not cover fader wear and tear.
5. The defective unit is to be returned carriage prepaid to ALLEN & HEATH or its
authorised agent with proof of purchase.
6. Units returned should be packed to avoid transit damage.
In certain territories the terms may vary. Check with your ALLEN & HEATH agent for any
additional warranty which may apply.
PA User Guide 3
Important Safety Instructions – Read First
Read instructions: Retain these safety and operating instructions for future reference. Heed all
warnings printed here and on the console. Follow the operating instructions
printed in this User Guide.
Do not open: There are no user serviceable parts inside. Refer any service work to
competent technical personnel only.
Power sources: Connect the console to mains power only of the type described in this User
Guide and marked on the rear panel. The power source must provide a good
ground connection.
Power cord: Use the power cord with sealed mains plug appropriate for your local mains
supply as provided with the console. If the provided plug does not fit into your
outlet consult your service agent. Route the power cord so that it is not likely to
be walked on, stretched or pinched by items placed upon or against it.
Grounding: Do not defeat the grounding and polarisation means of the power cord plug.
Do not remove or tamper with the ground connection in the power cord.
Ventilation: Do not obstruct the ventilation slots or e where the air flow position the consol
required for ventilation is impeded. If the console is to be operated in a rack
unit or flightcase ensure that it is constructed to allow adequate ventilation.
Moisture: To reduce the risk of fire or electric shock do not expose the console to rain or
moisture or use it in damp or wet conditions. Do not place containers of liquids
on it which might spill into any openings.
Heat: Do not locate the console in a place subject to excessive heat or direct sunlight
as this could be a fire hazard. Locate the console away from any equipment
which produces heat such as power supplies, power amplifiers and heaters.
Environment: Protect from excessive dirt, dust, heat and vibration when operating and
storing. Avoid tobacco ash, drinks spillage, and smoke, especially that
associated with smoke machines.
Handling: To prevent damage to the controls and cosmetics avoid placing heavy objects
on the control surface, scratching the surface with sharp objects, or rough
handling and vibration. Protect the controls from damage during transit. Use
adequate packing if you need to ship the unit. To avoid injury to yourself or
damage to the equipment take care when lifting, moving or carrying the unit.
Servicing: Switch off the equipment and unplug the power cord immediately if it is
exposed to moisture, spilled liquid, objects fallen into the openings, the power
cord or plug become damaged, during lightening storms, or if smoke, odour or
noise is noticed. Refer servicing to qualified technical personnel only.
Installation: Install the console in accordance with the instructions printed in this User
Guide. Do not connect the output of power amplifiers directly to the console.
Use audio connectors and plugs only for their intended purpose.
Important Mains Plug Wiring Instructions
The console is supplied with a moulded mains plug fitted to the AC mains
power lead. Follow the instructions below if the mains plug has to be replaced.
The wire which is coloured Green/Yellow or Green must be connected to the
terminal in the plug which is marked with the letter E or with the Earth symbol.
This appliance must be earthed.
The wire which is coloured Blue or White must be connected to the terminal in
the plug which is marked with the letter N.
The wire which is coloured Brown or Black must be connected to the terminal
in the plug which is marked with the letter L.


Produktspezifikationen

Marke: Allen & Heath
Kategorie: Nicht kategorisiert
Modell: PA12

Brauchst du Hilfe?

Wenn Sie Hilfe mit Allen & Heath PA12 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Allen & Heath

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-