Allen & Heath GL2 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Allen & Heath GL2 (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
L2SM2 ALLEN & HEATH
5
FREQUENCY RESPONSE: 20Hz to 20kHz +0/-1dB
DISTORTION: . THD 0.01% Line in to mix out at 1kHz
CROSSTALK: . output mute better than 98 dB at 1kHz
channel mute better than 88 dB at 1kHz
fader shutoff better than 88 dB at 1kHz
NOISE: ............ 22Hz to 22kHz
MIC EIN -127.5 dB into 150 ohms
LINE pre-amp at 0dB -88 dBu
MIX noise -85 dB ref 0VU
INTERNAL OPERATING LEVEL: -2 dBu
INTERNAL HEADROOM: ............ +23 dB
MAX OUTPUTS: .......................... balanced +27 dBu 600 ohms max load
unbalanced +21 dBu 2kohms max load
All console inputs and outputs are in-phase except for the GROUP INSERTS on GL2
METERS: ..................................... Peak responding bargraph
0VU = +4dBu at XLR outputs
PEAK LEDs: ................................. Turn on 5dB before clipping
SIG LEDs:
(GL2 only)
.................. dynamic responding Turn on at -20dBu
SPECIFICATION
0 dBu = 0.775 Volts RMS
0 dBV = 1 Volt RMS
POWER REQUIREMENTS: ........ 50/60Hz 40W max
Mains voltage set for local requirements.
PHANTOM POWER: ................... +48V DC 50mA
Channel XLR inputs individually switched
DIMENSIONS:
Width ............... 19.0" standard 19" rack .......... (483mm)
Height .............. 19.2" 11U rack space ............. (488mm)
Depth ............... 3.5" ........................................... (90mm)
WEIGHTS:
Unpacked ........ 21lbs ................... (10.5kg)
Packed ............ 28lbs ................... (13kg)
CONSTRUCTION:
All metal chassis.
Standard 19" rack mount in 11U space.
Single front panel with individual removable circuit assemblies.
Removable base for service access.
Removable internal power supply unit.
OUTPUTS:
L-R OUT ........................ XLR ............................ pin 2 hot, 3 cold balanced .......... 50 ohms ........... +4 dBu +27 dBu max
ST1/2 (GL2-S only) .......... 1/4" JACK .................. tip hot, ring gnd unbalanced ...... 75 ohms ........... variable +21 dBu max
MONO OUT (GL2 only) .. XLR............................ pin 2 hot, 3 cold balanced .......... 50 ohms ........... +4 dBu +27 dBu max
GROUP OUT (GL2 only) XLR ............................ pin 2 hot, 3 cold balanced .......... 50 ohms ........... +4 dBu +27 dBu max
DIRECT OUT ................. 1/4" JACK .................. tip hot, ring gnd unbalanced ...... 75 ohms ........... -2 dBu . +21 dBu max
AUX OUT ....................... 1/4" JACK .................. tip hot, ring gnd unbalanced ...... 75 ohms ........... variable +21 dBu max
2-TRACK SEND ............ RCA PHONO....................................... unbalanced ...... 1 kohm ............. -10 dBV
INSERT SEND ............... 1/4" JACK .................. tip send, ring ret unbalanced ...... 75 ohms ........... -2 dBu . +21 dBu max
MONITOR OUT (GL2 only) 1/4" jack ................. tip left, ring right unbalanced ...... 100 ohms ......... variable +21 dBu max
MONITOR OUT (GL2-S only) RCA PHONO ................................ unbalanced ...... 700 ohms ......... variable +15 dBu max
PHONES OUT ............... 1/4" jack ..................... tip left, ring right for stereo headphones 8 to 400 ohms
INPUTS:
MIC IN ............................ XLR ............................ pin 2 hot, 3 cold balanced .......... 2 kohms ........... variable -60 to -10dBu
LINE IN .......................... XLR............................ pin 2 hot, 3 cold balanced .......... 10 kohms ......... variable -40 to +10 dBu
or 1/4" JACK .................. tip hot, ring cold balanced .......... 10 kohms ......... variable -40 to +10 dBu
STEREO IN A ................ 1/4" JACK .................. tip hot, ring cold unbalanced ...... 20 kohms ......... variable -20 to +22 dBu
STEREO IN B ................ RCA PHONO....................................... unbalanced ...... 20 kohms ......... variable -20 to +22 dBu
RETURN IN ................... 1/4" JACK .................. tip hot, ring gnd unbalanced ...... >10kohms ........ variable -10 dBV min
2-TRACK RETURN ....... RCA PHONO....................................... unbalanced ...... >6 kohms ......... -10 dBV
INSERT RETURN .......... 1/4" JACK .................. tip send, ring ret unbalanced ...... >6 kohms ......... -2dBu
CONNECTIONS
L2SM2
ALLEN & HEATH 6
GL2-S CONNECTOR PANEL
GL2 CONNECTOR PANEL


Produktspezifikationen

Marke: Allen & Heath
Kategorie: Nicht kategorisiert
Modell: GL2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Allen & Heath GL2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Allen & Heath

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-