Alcatel Link Zone MW70 Bedienungsanleitung

Alcatel Router Link Zone MW70

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Alcatel Link Zone MW70 (2 Seiten) in der Kategorie Router. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Inserng the SIM card
1. Open the back cover.
We suggest that you put the ps of both
thumbs into the hole slot at the same me and
pull the cover outwards to open it.
Remove the SIM card
Do not pull the SIM card out forcefully. Press and
hold the at spring at rst, and then pull the SIM
card out.
Thank you for choosing LINKZONE
Here’s a quick guide to get you up and running
and making the most of your new device straight
away.
If you’re a devil for the detail, then visit www.
alcatelmobile.com where you will nd more
informaon about your LINKZONE.
If you intend to use your LINKZONE whilst
connected to your charger for more than 7 days,
then, it is advisable that you remove the baery
to avoid any potenal damage.
2. Press and push the SIM card to install SIM
card in the cards slot.
Ensure that the pins in the baery are aligned
with the pins in your device.
Close the back cover with the loopholes aligned.
Geng to know your LINKZONE
Once charged, you’re ready to go. Press down
on the power buon for a few seconds and your
LINKZONE will turn on.
Charging your device
Connect the reversible USB cable to charge your
LINKZONE. Use of a Alcatel 5V/1A or 5V/2A
charger is recommended.
Whats in the box
LINKZONE Quick start guide
USB cable Power adapter Baery
Signal indicator
WiFi indicator
SMS indicator
Battery indicator
USB
Power button
Note: The baery LED will light up when the
device is powered on.
Inserng the baery
Power indicator
Solid blue: The power is enough (21%-100%).
Flash blue: The device is in charging.
Solid red: The baery is lower than 20%.
Geng online
1. Ensure your LINKZONE is switched on and
connected to the network.
2. On the device you want to connect to
the internet, go to the network settings
and search for your Mobile Wi-Fi network
name. You can find your default password
on the label located on the underside of
the battery cover.
3. Click connect.
4. Enter the password found on the label
located on the underside of the battery
cover.
Forgoen your password?
If you forget your password, just reset your device
and you will be back up and running in no me.
Use a paperclip or blunt pin to gently press the
reset buon.
Not responding?
If the device becomes unresponsive, long press
and hold the power buon for 10 seconds unl
the device reboots.
LINK APP
1. Make sure your device is connected to the
internet.
2. Scan the QR code.
3. Download the LINK APP from App store or
Google Play store.
4. Click on LINK APP icon to log on to the
management page.
Note: The LINK app and website share the same
password. Default password is: admin
You’ve got mail - reading your text
messages
When you see the lile envelope icon illuminate,
it means you’ve got a text.
4. You are now on your LINKZONE home page.
Here you can click on the text message
icon to read your texts. You can also
change your settings such as password or
device name.
1. Make sure you’ve got a device connected
to your LINKZONE - see ‘Getting Online’ for
more information.
2. Enter into your internet 192.168.1.1
browser – tip, it’s good to bookmark this for
easier access next time.
3. Enter your username and password, the
default ones are really simple, you can
change these later if you like.
Username: admin
Password: admin
Quick Start Guide
CJB1M20ALAAB


Produktspezifikationen

Marke: Alcatel
Kategorie: Router
Modell: Link Zone MW70

Brauchst du Hilfe?

Wenn Sie Hilfe mit Alcatel Link Zone MW70 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Router Alcatel

Bedienungsanleitung Router

Neueste Bedienungsanleitung für -Kategorien-