Alcatel E190 Draadloze DECT telefoons Bedienungsanleitung
Alcatel
Draadloze DECT telefoons
E190 Draadloze DECT telefoons
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂŒr Alcatel E190 Draadloze DECT telefoons (2 Seiten) in der Kategorie Draadloze DECT telefoons. Dieser Bedienungsanleitung war fĂŒr 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/alcatel/e190-draadloze-dect-telefoons/html/bg1.png)
Charging batteries for the first time
Before you start to use your telephone make sure that all batteries are fully
charged for 15 hours.
Important note: This telephone is not designed for Emergency calls when the
mains power fails
For Emergency calls you should have a basic phone that operates without
mains power, connected to your line so that you can make calls during a
power failure.
USER'S GUIDE
Store a contact in the phonebook
1. Press MENU key to enter menu selection.
2. Press the Navigation key to select PHONEBOOK and then press OK key
to select.
3. Press OK key again to enter NEW ENTRY.
4. Enter the name of the contact (maximum 12 characters).
To edit, press BACK/CLEAR key to delete the last character entered.
Press OK key to confirm the name entry.
5. Enter the number of the contact (maximum 24 digits) and then press OK
key to confirm. A confirmation beep is played.
Access phonebook
1. Press PHONEBOOK key in idle mode to browse the phonebook
entries. Alternatively, you can press the MENU key, to display PHONEBOOK
and then press OK key to select.
2. Press the Navigation key to select LIST and then press OK key to confirm.
The phonebook entries will be listed in alphabetical order, and you can press
Navigation key to scroll through the stored entries.
3. Press OK key to view the details of the selected entry.
Note : Instead of pressing the Navigation key to browse the phonebook entries,
you can press the numeric key corresponding to the first letter of the entry
you wish to locate.
Modify a phonebook entry
1. Press MENU key to enter menu selection.
2. Press the Navigation key to select PHONEBOOK and then press OK key
to select.
3. Press the Navigation key to select EDIT ENTRY and then press OK key
to select.
4. Press the Navigation key to select an entry to edit and then press OK key.
The current name is displayed.
Edit the name and then press OK key to confirm.
5. Edit the number and then press OK key to confirm. A confirmation beep
is played.
Delete a phonebook entry
1. Press MENU key to enter menu selection.
2. Press the Navigation key to select PHONEBOOK and then press OK key
to select.
3. Press the Navigation key to select DELETE and then press OK key to select.
4. Press the Navigation key to select an entry to delete and then press OK key.
5. Press OK key again to confirm. A confirmation beep is played.
Delete all entries from the phonebook list
1. Press MENU key to enter menu selection.
2. Press the Navigation key to select PHONEBOOK and then press OK key
to select.
3. Press the Navigation key to select DELETE ALL and then press OK key
to select.
4. Press OK key again to confirm. A confirmation beep is played.
Direct access memory
There are 2 direct access memories (Keys 1 & 2) in addition to the phonebook
memory. A long press on the keys in idle mode will automatically dial the
stored phone number.
Add/edit direct access memory
1. Press MENU key to enter menu selection.
2. Press the Navigation key to select PHONEBOOK and then press OK key
to select.
3. Press the Navigation key to select DIRECT MEM. and then press OK key
to select.
4. Press the Navigation key to select KEY 1 or KEY 2 and then press OK key.
The stored name is displayed, or NO NUMBER if it is empty.
If there is no number stored for the selected key or if you want to change the
name or number currently stored, press MENU key to enter direct memory
menu to add/edit the name or number.
5. Press the Navigation key to select EDIT NUMBER and then press OK key
to select. The display shows the currently stored name, or ENTER NAME if
there is no number stored. Edit or enter the name you want and then press
OK key. The display shows the currently stored number, or ENTER NUMBER
if there is no number stored. Edit or enter the number you want and then
press OK key to confirm. A confirmation beep is played.
Phone Function Keys
1OK key
Press to select the function displayed on the handset screen directly above it.
2Back/clear key
Press to delete a digit/a character in editing mode.
Press to return to idle mode.
Press and hold to change the handset idle display between handset name and
3Navigation key
Press UP to access the call log* and press DOWN to access the phonebook when
Press UP/DOWN to increase or decrease earpiece volume during a call.
Press UP/DOWN to increase or decrease handsfree volume (E190 only).
Scroll up/down a list.
4Talk key
Handsfree (E190 only).
5Hang-up/Exit key
Press and hold to switch the handset power on/off.
Press to end a call.
Press to return to idle mode in other menus.
6Recall (Flash) key
Access to operator services*
7Menu key
Press to access the main menu.
8Redial key
Press to access the Redial list.
9Star key
Press and hold to lock/unlock keypad.
Press and hold to toggle between the external and internal calls when both are set up..
10 Hash key
Press and hold to insert a pause during a call.
Press and hold to turn the ringer on/off.
11 Mute key
Press to mute / unmute the handset microphone.
12
Press to initiate an internal call.
Call transfer/Intercom key
Press to hold the line and page another handset during a call.
Press and hold to initiate a conference call.
*Subject to subscritption and availability of the service from the fixed line operator.
HANDSET LOCATOR button
Press to page handsets.
Press and hold to start registration procedure.
Base station
date/time.
in idle mode.
D
C
Whatâs on the display?
A
B
A Display Icons
B Displays when in menu mode to confirm
your selection.
C Indicates that more options are available.
Use the UP / DOWN keys to scroll up/down.
D Displays when in menu mode.
Select BACK to return to the previous menu
level. Select BACK to delete the last digit/
character entered.
What the icons mean?
Indicates battery is fully charged.
Indicates battery is fully discharged.
Indicates that an external call is connected or held.
Icon blinks when receiving an incoming call.
Indicates you have a new Voice Mail message.
Indicates you have new missed calls, or the call log is being viewed.
Displays when the phonebook is accessed.
Displays when the alarm clock is activated.
Displays when handsfree is activated (E190 only).
Displays when ringer volume is turned off.
Indicates that the handset is registered and within range of the base station.
Icon blinks when the handset is out of range or is searching for a base.
Displays when in menu mode to confirm your selection.
Indicates that more options are available.
Use the UP / DOWN keys to scroll up/down.
Displays when in menu mode.
Select BACK to return to the previous menu level.
Read First Before Use
Choosing a site for the base unit and charger pod
If you have a Broadband line
If you connect your telephone to a line with a broadband connection, you
will need to insert a microfilter between the telephone and the telephone
line, otherwise you may get interference between the telephone and the
broadband, which could cause problems.
The base unit and charger pod(s) should be placed on a level surface, in a
position where:
extension socket (the charger pod does not have a telephone line connection)
microwave ovens, fluorescent lights, televisions etc.
Radio signals between handset and base unit
To use your handset and base unit together, you must be able to maintain a
radio link between them. Be aware that any large metal objects, like a
refrigerator, a mirror, filing cabinet, etc, between the handset and the base
unit may block the radio signal. Other solid structures, like walls, may reduce
the signal strength.
Mains power connection
adapters supplied with the unit.
and will invalidate any approval given to this apparatus.
Battery safety - CAUTION
ONLY use the rechargeable batteries supplied with the handset.
damage to your telephone.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
Installation and Set-up
Fit the rechargeable batteries in each handset
2) Close the battery compartment cover, sliding it into place and pressing firmly
to make sure it is secure.
Use handsfree (only for E190)
Press TALK key at any moment in normal talk mode to talk in handsfree mode.
To deactivate the handsfree mode, press again the TALK key to talk in normal
talk mode
Adjust the earpiece volume
During a call, press the Navigation key to select from VOLUME 1 to VOLUME 5.
Mute/unmute microphone
When the microphone is muted, the handset displays MUTE ON, and your
caller cannot hear you.
During a call, press the MUTE key to turn on/off the microphone.
Paging
The paging feature enables you to locate a missing handset if the handset is
in range and contains charged batteries.
Press HANDSET LOCATOR key located at the back of the base
station. All the registered handsets start to ring.
Once retrieved, press any key on the handset or the HANDSET
LOCATOR key again to end the paging.
Call waiting
If you have subscribed to Call Waiting service, the earpiece will emit a beep
tone to inform you that there is a second incoming call. The number or name
of the second caller will also be displayed on your phone if you have
subscribed to Caller Line Identification service (CLI). Please contact your
network provider for more information on this service.
Using your phonebook
Your phone can store up to 50 phonebook memories.
How to enter characters?
When you select a field in which you can enter text, you can enter the letters
that are printed on the keys by pressing the relevant key once or several times.
letter B, and so on... Spaces and other symbols can be entered using the
or key.
300mAH, or Brand name: GREPOW, Capacity: Ni-MH 1.2/300mAH) into
Handset in accordance with the polarity marked in the battery compartment.
Make and answer calls
Make a call
Predialling
Dial the number (maximum 24 digits) and then press TALK key.
Direct dialling
Press TALK key to take the line and then dial the number
(maximum 24 digits).
Call from redial list
Press REDIAL key in idle mode.
Press the Navigation key to an entry in the redial list and then
press TALK key.
Call from the call log
Press CALL LOG key in idle mode.
Press the Navigation key to an entry in the call list and then
press TALK key.
Note: You need to subscribe to Caller Line Identification service to be able
Call from the phonebook
Press PHONEBOOK key in idle mode.
Press the Navigation key to an entry in the phonebook and then
press TALK key.
Answer and end a call
1. When the phone rings, press TALK key.
IMPORTANT NOTE: You can simply place the handset back on its base
station or charger pod to end the call.
Connecting AC (electrical) power
1. Plug the base adaptor cord into the power jack on rear panel of the base
2. Connect telephone line cord into the phone jack on rear panel of the base
and the other end into a main socket.
3. In case of twin or triple system, plug the charger power adaptor cord into
charge the batteries fully.
Leave the handset on the charging cradle for 15 hours.
CAUTION: Use only the power supply that came with this unit. Using other
power supplies may damage the unit.
Base and charger power adaptor :
Base: S003IV0600050 or S003IB0600050
Charger: S003IV0600015 or S003IB0600015
Input:
Output: 6V DC / 500mA(Base)
6V DC / 150mA(Charger)
Change the display language
1. Press MENU key to enter menu selection.
2. Press the Navigation key to select PERSONAL SET and then press OK key
to select.
3. Press the Navigation key to select LANGUAGE and then press OK key
to select.
4. Press the Navigation key to your desired language and press OK key to
confirm. A confirmation beep is played.
Note : Once the display language is set, the option menus on the handset will
switch to display in the selected language immediately.
Your Telephone Operations
Switching on/off
switch on/off the handset in idle mode.
Note: When the handset is OFF, it cannot be used for making calls including
emergency calls. There will be no ringing during an incoming call. To answer
a call, you will need to switch it back on. It may take some time for the
To lock/unlock the keypad
Press and hold the STAR key for 1 second to lock/unlock the keypad
in idle mode.
Note: Incoming calls can still be answered even if the keypad was locked.
Set time and date
Note: If you subscribe to the Caller Display service, the time and date will be
set automatically when you receive a call, but you may still need to set the
correct year.
1. Press MENU key to enter menu selection.
2. Press the Navigation key to select CLOCK&ALARM and then press OK
key to select.
3. Press OK key to select DATE/TIME. The last stored date is displayed.
4. Press the Navigation key to select AM or PM (if the time is in 12 HOURS
format) and then press OK key to confirm. A confirmation beep is played.
Change your handsetâs name
1. Press MENU key to enter menu selection.
2. Press the Navigation key to select PERSONAL SET and then press OK
key to select.
3. Press the Navigation key to select HANDSET NAME and then press OK
key to select. The current handset name is displayed.
4. Press BACK/CLEAR key to delete the characters one by one.
Enter the new name (maximum 10 characters) and press OK key to confirm.
A confirmation beep is played.
Delete direct access memory
1. Press MENU key to enter menu selection.
2. Press the Navigation key to select PHONEBOOK and then press OK key
to select.
3. Press the Navigation key to select DIRECT MEM. and then press OK key
to select.
4. Press the Navigation key to select KEY 1 or KEY 2 and then press OK key.
The stored name is displayed (or NO NUMBER if it is already empty).
5. Press MENU key to enter direct memory menu.
6. Press the Navigation key to select DELETE and then press OK key to
select.
Press OK key again to confirm. A confirmation beep is played.
Using the redial list
The redial list stores the last 5 numbers dialed.
Access redial list
1. Press REDIAL key in idle mode and press Navigation key to browse the
redial list. The last number dialed will appear first in the redial list.
2. Press OK key to view the details of the selected entry.
Save a redial number into the phonebook
1. Press REDIAL key in idle mode to go to the redial list.
2. Press the Navigation key to select an entry.
3. Press MENU key to display SAVE NUMBER, then press OK key to display
ENTER NAME. Enter the name of the contact (maximum 12 characters)
and then press OK key to save the entry, and return the display to the redial list.
Using the call log
To receive Caller ID you may need to contact your telephone service
provider, and they will inform you also of any charges for it.Caller ID lets you
see the phone numbers of your callers on the handset display, before you
answer and in your Call Log afterwards.The Call Log stores the last 10
external calls, whether or not you answered the call, so you can call them
back later.
Only the most recent call is saved if there are repeat calls from the same
number. When the Call Log is full, the next new call will replace the oldest
entry.
If you've got a new call in the Call Log, the Caller Display icon will appear on
the handset display.
If the received number is the same as one in your phonebook, the name from
the phonebook will display as well as the number.
If a call is from someone who withheld their number, the display will show
WITHHOLD ID.
If the call is from someone whose number is unavailable, or if you have not
subscribed to Caller ID but have set the date and time, the display will show
CALLING when it is received and UNAVAILABLE in the Call Log.
Access call log
Press CALL LOG(UP) key in idle mode and press Navigation key to browse
the call list. The calls are displayed in chronological order with the most
recent call at the top of the list.
1. Press OK key to display more details of the call, including the date and time.
Save call list entry into the phonebook
2. Press CALL LOG(UP) key in idle mode to go to the call list.
3. Press the Navigation key to select an entry and then press MENU key.
4. Press the Navigation key to select SAVE NUMBER and then press OK key
to select.
( Enter the name of the contact (maximum 12 characters) and then press
OK key to confirm.
2
1
4
6
9
3
12
5
8
10
11
7
E130 / E130 Duo / Trio
E190 / E190 Duo / Trio
C
M
Y
CM
MY
CY
CMY
K
E130 190 ENG final.pdf 1 1/4/2014 22:10:37
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/alcatel/e190-draadloze-dect-telefoons/html/bg2.png)
Handset Tone
Set the ring volume
There are 5 ringer volume options (OFF, LEVEL 1, LEVEL 2, LEVEL 3, LEVEL 4
and LEVEL 5). The default level is LEVEL 3.
1. Press MENU key to enter menu selection.
2. Press the Navigation key to select PERSONAL SET and then press OK
key to select.
3. Press the Navigation key to select HANDSET TONE and then press OK
key to select and show RING VOLUME. Press the OK key again to select.
4. Press the Navigation key to your desired volume level and then press OK
key to confirm. A confirmation beep is played.
Set the ring melody
There are 10 ring melodies available on your handset.
1. Press MENU key to enter menu selection.
2. Press the Navigation key to select PERSONAL SET and then press OK key
to select.
3. Press the Navigation key to select HANDSET TONE and then press OK key
to select.
4. Press the Navigation key to select RING TONES and then press OK to select.
5. Press the Navigation key to your desired melody and then press OK key to
confirm. A confirmation beep is played.
Activate/deactivate key tone
A single tone is emitted when a key is pressed. You can enable or disable the
key tone. By default, the key tone is ON.
1. Press MENU key to enter menu selection.
2. Press the Navigation key to select PERSONAL SET and then press OK key
to select.
3. Press the Navigation key to select HANDSET TONE and then press OK key
to select.
4. Press the Navigation key to select KEY BEEP and then press OK to select.
5. Press the Navigation key to select ON or OFF and then press OK key to
confirm. A confirmation beep is played.
Activate / deactivate auto hang-up
This function enables you to end a call automatically by simply placing the
handset on the base station. By default, the Auto Hang up feature is ON.
1. Press MENU key to enter menu selection.
2. Press the Navigation key to select PERSONAL SET and then press OK
key to select.
3. Press the Navigation key to select AUTO HANG-UP and then press OK
key to select.
4. Press the Navigation key to select ON or OFF and then press OK key to
confirm. A confirmation beep is played.
Set date / time format
You can set your preferred date/time format for your phone. The default
format is DD/MM and 24 HOURS.
Set time format
1. Press MENU key to enter menu selection.
2. Press the Navigation key to select CLOCK&ALARM and then press OK
key to select.
3. Press the Navigation key to select SET FORMAT and then press OK key
to select.
4. Press OK key to enter TIME FORMAT. The current setting is displayed.
5. Press the Navigation key to select 12 HOURS or 24 HOURS and
then press OK key to confirm. A confirmation beep is played.
Set date format
1. Press MENU key to enter menu selection.
2. Press the Navigation key to select CLOCK&ALARM and then press OK
key to select.
3. Press the Navigation key to select SET FORMAT and then press OK key
to select.
4. Press the Navigation key to select DATE FORMAT and then press OK key
to select. The current setting is displayed.
5. Press the Navigation key to select DD/MM or MM/DD and then press OK
key to confirm. A confirmation beep is played.
Set alarm
The handset has an alarm clock feature, and when the alarm is set, the is
shown on the handset display.
When the alarm time is reached, the display flashes --ALARM-- and the alarm
melody is played for 1 minute or until any handset key is pressed.
If the alarm is set for ON DAILY and the alarm will sound again on the next day.
If the alarm was set for ON ONCE, the will be turned off.
1. Press MENU key to enter menu selection.
2. Press the Navigation key to select CLOCK&ALARM and then press OK
key to select.
3. Press the Navigation key to select ALARM and then press OK key to select.
4. Press the Navigation key to select OFF, ON ONCE or ON DAILY and then
press OK key to confirm.
If you select ON ONCE or ON DAILY, enter the time (HH-MM) for the alarm
and press the UP/DOWN key to select AM or PM if the time is in 12 HOURS
format.
5. Press OK key to confirm. A confirmation beep is played.
Set alarm tone
1. Press MENU key to enter menu selection.
2. Press the Navigation key to select CLOCK&ALARM and then press OK key
to select.
3. Press the Navigation key to select ALARM TONE and then press OK key
to select.
4. Press the Navigation key to select MELODY 1, MELODY 2 or MELODY 3
and then press OK key to confirm. A confirmation beep is played.
Advanced use of your telephone
Change Master PIN
The Master PIN is used for registration/unregistration of handsets. The default
Master PIN number is 0000.
Note : If you forget your PIN code, you can reset it to its default 0000 using
a handset Reset.
1. Press MENU key to enter menu selection.
2. Press the Navigation key to select ADVANCED SET and then press OK key
to select.
3. Press the Navigation key to select CHANGE PIN and then press OK key to
select.
Enter the current Master PIN when prompted and then press OK key to confirm.
As you enter the PIN it will be shown as asterisks (*) on the screen.
(Enter the new PIN and then press OK key to confirm. A confirmation beep is
played.)
Register your handset
IMPORTANT : When you purchase a telephone, all handsets are already
registered to the base, so you do not need to register them. Handset
registration is only necessary when you buy extra handsets or if a handset
has become faulty.
The procedure described below is for E130 or E190 .
They may be different if you want to register another handset model, in
which case you should refer to its user guide.
Change recall time
You may need the R button to send a Recall signal (also called Flash or
Timed Break Recall) if you are connected to a PBX. You should normally leave
the Recall Time at its default setting of Short (100ms), as this is the standard
recall required in the telephone network, but it can be changed to Medium
(270ms) or Long (600ms) if your telephone is connected to a PBX that
requires a different recall time.
1. Press MENU key to enter menu selection.
2. Press the Navigation key to select ADVANCED SET and then press OK
key to select.
3. Press the Navigation key to select RECALL TIME and then press OK key
to select.
4. Press the Navigation key to select SHORT, MEDIUM or LONG and then
press OK key to confirm. A confirmation beep is played.
Change the dial mode
You should normally leave the dialling mode at its default setting of TONE.
However, you can change to PULSE if necessary.
Note: If PULSE dialling is set, you can press the * key to switch to TONE
dialling for the rest of that call.
1. Press MENU key to enter menu selection
2. Press the Navigation key to select ADVANCED SET and then press OK key
to select.
3. Press the Navigation key to select DIAL MODE and then press OK key
to select.
4. Press the Navigation key to select TONE or PULSE and then press OK key
to confirm. A confirmation beep is played.
Reset unit
You can reset your phone to its default settings with this feature.
Note: Upon reset, all your personal settings, call log and redial list entries will
be deleted and the phone will return to its default settings. However, your
phonebook will remain unchanged after reset.
1. Press MENU key to enter menu selection.
2. Press the Navigation key to select ADVANCED SET and then press OK
key to select.
3. Press the Navigation key to select RESET and then press OK key to select.
4. Press OK key again to confirm. A confirmation beep is played and the unit is
reset to its default settings.
âWhen I key in a number, it appears on the display, but Icannot make an
outside callâ Try a different position for the base unit â
somewhere higher if possible, or further from
other electrical equipment.
Try moving the handset closer to the base unit.
âThe phone does not ringâ Check that the base unitâs mains power adapter
is plugged in and power is switched on.
Check that ring volume is not on OFF
âI hear âbeepsâ from my handset while Iâm on a callâ
You may be going out of range of the base unit.
Move closer or your call may be cut off.
Check the Battery Level symbol on the display.
If itâs low, recharge the batteries.
âWhen I try to make a call, I hear busy toneâ
If youâre using a multi-handset system,
check whether another handset is already on
a call.
âThe volume in the earpiece is low when Iâm on a callâ
Make sure youâre holding the earpiece correctly
over your ear.
Adjust the volume using the UP/DOWN key.
Batteries
âThe handsetâs battery cells are running low within an hour or twoâ
Before you first use the handset, you should
have left it on the base unit or charger pod for
15 hours to charge the batteries fully.
You may need to replace the batteries.
Check the connection between the base unit
and the mains power socket.
Additional handsets must be registered to the base unit before you can
use them. Up to 4 handsets can be registered to one base station.
The Master PIN is required before you can register or unregister handsets.
By default, the Master PIN is 0000.
On the base station, press and hold the HANDSET LOCATOR key for
approximately 5 seconds.
1. On the handset, press MENU key to enter menu selection.
2. Press the Navigation key to select ADVANCED SET and then press OK key
to select.
3. Press the Navigation key to select REGISTRATION and then press OK key
to select.
Note : If no action is taken on the handset within 10 seconds, the registration
procedure will be aborted. If this happens, repeat the first step.
WAITING is displayed on the screen. A confirmation beep is played to
indicate successful registration, and the handset will return to idle mode,
with its handset number displayed.
Note : If no base is found within a certain period, an error tone to indicate
failed registration and the handset returns to idle mode, and you will need to
repeat the registration sequence.
Unregister your handset
1. Press MENU key to enter menu selection.
2. Press the Navigation key to select ADVANCED SET and then press OK key
to select.
3. Press the Navigation key to select UNREGISTER and then press OK key
to select.
4. Enter the Master PIN when prompted and then press OK key to confirm.
(the default master PIN is 0000)
5. Press the Navigation key to select the handset number to unregister and
then press OK key to confirm.
A confirmation beep is played to indicate successful unregistration.
Note : If no action is taken on the handset within 15 seconds, the
unregistration procedure will be aborted and the handset returns to idle mode.
You must use another handset to unregister handsets from the base.
Troubleshooting
If you have difficulty with your phone, please try the suggestions listed below.
As a general rule, if a problem occurs, remove the batteries from all the
handsets in your installation for about 1 minute, then disconnect and reconnect
the power supply to the base and reinstall the handset batteries.
ALWAYS check first that: You have followed all the steps listed in the user
manual to install and set up your telephone.
All connectors are firmly inserted in their sockets.
Mains power to the base unit is switched on at
the socket.
The handsetâs batteries are correctly and
securely installed and are not run down.
Everyday use
âI cannot make or answer callsâ
If the handsetâs display is blank, it may have
been switched off. Press and hold the HANG-UP
/EXIT key to switch it back on.
Check that the base unitâs mains power adapter
is plugged in and power is switched on.
The base unit needs mains power for normal
operation of the phone
â not just for charging the batteries.
Make sure you are using the telephone line
cable supplied with your telephone. Other
telephone line cables might not work. Move the
handset closer to the base unit.
Check the battery level symbol on the display.
If it is low, replace the handset on the base unit
or charger pod to recharge the batteries.
Switch off power at the mains socket, wait for a
short time and then switch back on. This may
solve the problem.
âI cannot make a callâ If the handset display shows KEYS LOCKED,
press and hold the * button to unlock it before
you make a call.
Only one handset (or the base unit) can be
connected to the outside line at a time.
If another handset is already using the line,
you need to wait until it has finished its call.
âI try to recharge the batteries but I still get a warning that they are lowâ
You need to replace the batteries.
Dispose of used batteries safely â never burn
them, or put them where they could get
punctured.
Do not use non-rechargeable batteries in your
handset â they may explode, causing damage.
If the fault persists... The store where you bought your telephone can
also provide you with information and after-
sales support.
Model:
A/W No. : 10000962 Rev.0 (EN)
Made in PRC
Delete a Call Log entry
1. Press CALL LOG(UP) key in idle mode to go to the call list.
2. Press the Navigation key to select an entry and then press MENU key.
3. Press the Navigation key to select DELETE and then press OK key to select.
(Press OK key again to confirm. A confirmation beep is played.)
Delete all entries in the Call Log
1. Press CALL LOG (UP) key in idle mode to go to the call list.
2. Press the MENU key.
3. Press the Navigation key to select DELETE ALL and then press OK key
to select.
(Press OK key again to confirm. A confirmation beep is played.
Using the intercom
Intercom, call transfer and conference are only possible with at least 2
handset registered to the same base station. It allows you to make free
internal calls, transfer external calls from one handset to another, and set
up a 3-way conference with two handsets and an external call.
If you try to make a call while another handset is already on an external call,
you'll hear a busy tone for a few seconds before the display returns to idle.
Intercom another handset
Press INT key in idle mode.
Intercom is established immediately if there are only 2 registered
handsets.
If there are more than 2 registered handsets, the handset numbers which
are available for intercom, and a * , will be displayed. Press the specific
handset number you wish to call, or press * to ring all handsets, to start
intercom.
Transfer an external call to another handset
During the call, press INT key to put the external call on hold
(the caller can no longer hear you).
Intercom is established immediately if there are only 2 registered handsets.
If there are more than 2 registered handsets, the handset numbers which
are available for intercom, and a '*', will be displayed. Press the specific
handset number you wish to call, or press '*' to ring all handsets, to start
intercom.
Press TALK key on the called handset to answer the internal call,
where both internal callers can talk. Intercom is established.
Press HANG-UP/EXIT key on the first handset to transfer the
external call to the called handset. The external call is transferred.
Note : If there is no answer from the called handset, press INT key to resume
the external call.
Answer an external call during intercom
During intercom, a new call tone is emitted when there is an incoming
external call.
Press TALK key to answer the external call and end the intercom.
Connection with the external call is established.
Note : To put the internal call on hold and answer the incoming external call,
press INT key.
Switch between an internal and external call
During the call, press key to switch between an internal or
external call.
Establish a three-party conference call
The conference call feature allows one external call to be shared with two
handsets (in intercom). The three parties can share the conversation and no
additional network subscription is required.
During an external call, press INT key to put the external call on
hold (the caller can no longer hear you).
If there are more than 2 registered handsets, the handset numbers which are
available for intercom will be displayed. Press the specific handset number
you wish to call to start intercom.
Press TALK key on the called handset to answer the internal call,
where both internal callers can talk. Intercom is established.
Press and hold key on the first handset to start the three-party
conference.
CONFERENCE will be displayed on the screen once the conference
call is established.
CONFORMITY
This unit conforms to the following rules and regulations: 1995/5/EC Radio
frequency and telecommunication equipment and the mutual acceptance of
conformity. The CE mark proves the above.
ENVIRONMENT
This symbol means that your inoperative electronic appliance must be
collected separately and not mixed with the household waste.The
European Union has implemented a specific collection and recycling
system for which producers are
responsible.
This appliance has been designed and manufactured with high quality materials
and components that can be recycled and reused. Electrical and electronic
appliances are liable to contain parts that are necessary in order for the system
to work properly but which can become a health and environmental hazard
if they are not handled or disposed of in the proper way.
Consequently, please do not throw out your inoperative appliance with the
household waste.
If you are the owner of the appliance, you must deposit it at the appropriate local
collection point or leave it with the vendor when buying a new appliance.
- If you are a professional user, please follow your supplier's instructions.
- If the appliance is rented to you or left in your care, please contact your
service provider.
Keen to preserve the environment, ATLINKS has equipped this appliance with
a switching power supply, offering better energy efficiency. The advantages
include not only very low electricity consumption, but also a more compact
format than the conventional power supply units used by the previous range.
The used batteries from your telephone (if it has batteries) must be disposed
of in compliance with current environmental protection regulations.
Comply with your local regulations. Return your batteries to your reseller or
dispose of them at an approved recycling centre.
Help us protect the environment in which we live!
âWhen I press on the keys,nothing happensâ
Make sure the batteries are fitted in your
handset. If the Battery Level symbol on the
display shows âlowâ, put your handset back on
the cradle to charge.
www.alcatel-home.com
ATLINKS Europe
22 quai Gallieni
92150 Suresnes- France
© ATLINKS 2014 - Reproduction prohibited.
The Manufacturer reserves the right to modify the specifications
of its products in order to make technical improvements or
comply with new regulations.
ALCATEL and ATLINKS are registered trademarks.
The Alcatel logo and Alcatel name are trademarks of Alcatel Lucent
and used under licence by ATLINKS.
E130 / E130 Duo / Trio
E190 / E190 Duo / Trio
C
M
Y
CM
MY
CY
CMY
K
E130 190 ENG final.pdf 2 1/4/2014 22:10:39
Produktspezifikationen
Marke: | Alcatel |
Kategorie: | Draadloze DECT telefoons |
Modell: | E190 Draadloze DECT telefoons |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Alcatel E190 Draadloze DECT telefoons benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Draadloze DECT telefoons Alcatel
![Alcatel](/images/logos/alcatel.png)
8 September 2024
![Alcatel](/images/logos/alcatel.png)
8 September 2024
![Alcatel](/images/logos/alcatel.png)
8 September 2024
Bedienungsanleitung Draadloze DECT telefoons
- Draadloze DECT telefoons Medion
- Draadloze DECT telefoons SilverCrest
- Draadloze DECT telefoons Panasonic
- Draadloze DECT telefoons AEG
- Draadloze DECT telefoons Siemens
- Draadloze DECT telefoons Telekom
- Draadloze DECT telefoons Thomson
- Draadloze DECT telefoons Grundig
- Draadloze DECT telefoons Esscom
- Draadloze DECT telefoons Topcom
- Draadloze DECT telefoons ARCHOS
- Draadloze DECT telefoons Geemarc
- Draadloze DECT telefoons Motorola
- Draadloze DECT telefoons Olympia
- Draadloze DECT telefoons Switel
- Draadloze DECT telefoons MT Logic
- Draadloze DECT telefoons Gigaset
- Draadloze DECT telefoons Fysic
- Draadloze DECT telefoons Lifetec
- Draadloze DECT telefoons Sagem
- Draadloze DECT telefoons AVM
- Draadloze DECT telefoons AGFEO
- Draadloze DECT telefoons Amplicomms
- Draadloze DECT telefoons Auerswald
- Draadloze DECT telefoons DeTeWe
- Draadloze DECT telefoons Doro
- Draadloze DECT telefoons Emporia
- Draadloze DECT telefoons Hagenuk
- Draadloze DECT telefoons Swatch
- Draadloze DECT telefoons Swissvoice
- Draadloze DECT telefoons Tiptel
- Draadloze DECT telefoons Mitel
- Draadloze DECT telefoons Ranex
- Draadloze DECT telefoons Uniden
- Draadloze DECT telefoons Sagemcom
- Draadloze DECT telefoons Ericsson
- Draadloze DECT telefoons Eurostar
- Draadloze DECT telefoons Futiro
- Draadloze DECT telefoons Logicom
- Draadloze DECT telefoons Nortel
- Draadloze DECT telefoons Premier
- Draadloze DECT telefoons Proximus
- Draadloze DECT telefoons AT-T
- Draadloze DECT telefoons BT
- Draadloze DECT telefoons Bang Olufsen
- Draadloze DECT telefoons Alcon
Neueste Bedienungsanleitung fĂŒr -Kategorien-
![Mitel](/images/pdf_free.png)
26 August 2024
![Switel](/images/pdf_free.png)
25 August 2024
![Doro](/images/pdf_free.png)
25 August 2024
![Ericsson](/images/pdf_free.png)
25 August 2024
![Doro](/images/pdf_free.png)
25 August 2024
![Doro](/images/pdf_free.png)
25 August 2024
![Doro](/images/pdf_free.png)
25 August 2024
![Emporia](/images/pdf_free.png)
Emporia TH21-UK Draadloze DECT telefoons Bedienungsanleitung
24 August 2024![Switel](/images/pdf_free.png)
24 August 2024