Akyga AK-BC-02 Bedienungsanleitung

Akyga Ladegerät AK-BC-02

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Akyga AK-BC-02 (4 Seiten) in der Kategorie Ladegerät. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
AK-BC-02 - user manual
/ak-bc-02
www.akyga.com
>80%
Short description of the product
The product is compatible with the applicable national and European requirements.
What is in the box?
- AK-BC-02 battery charger
- Power cord
S explanation:ymbols
There is a risk of losing health or life (e.g. by electic shock).
There is a particular danger connected with service.
Important tips and information.
Product accordance with the EU directive 2002/96/EC. The symbol of the crossed out basket
placed on the product means that the marked product can not be disposed of with other
household waste. After use, the product must be return to collection point for used electical and
electronic equipment or to the seller. Appropriate segregation of rubbish for subsequent
processing, recovery or descrution contributes to avoiding negative effects on the environment
and health, and also allows the recovery of raw materials from which the product is made.
p. 1
The CE standard description on the product is the manufacturer's declaration that the marked
product meets the requirements of the directive so-called The "New Approach" of the European
Union (EU). For security and certification (CE) reasons, the device can not be rebuild or change in
any way. In the reason of using the power supply for other purposes than those described, the
product may be demaged. The incorrect use may also cause hazard such as short-circuits,
burns, electric shocks, etc. Read the users manual carefully and keep it for later use. The product
could be share to third partie only with the user manual included.
The Akyga® AK-BC-02 battery charger is used to simultaneous charging up to 8 batteries in pairs of two
cells The battery charger is compatible with Ni-MH AA (R6) and AAA (R03) batteries. It has
multifunctional LCD display which shows the status of each battery separately and warns about placing
the batteries in wrong polarity. It has also a set of protectors OVP, OTP, OPP, SCP, OCP and additional
safeguards to protect against: improper placement of the battery in the charger, overcharging of the
battery, overheating of the cells (60°C), placement of damaged or incorrect cells and effects of short-
circuit and overload.
.
The product is adapted to supply voltage in the range of 100-240V, 50/60Hz.
The power consumption of charging battery can not exceed the charger nominal current.
EC
BOX
Ecological Solutions
GREEN
battery charger
The RoHS mark on the product is the manufacturer's declaration that the marked product meets
the requirements of the EU Restriction of Hazardous Substances (2002/95/EC) directive, which
aims to reduce the amount of hazardous substances penetrating into the environment from
electrical and electronic waste.
AK-BC-02 - user manual
p. 2
Safety Precautions
WARNING! Product heats up during operation. To reduce the risk of burns or overheating the power
supply, do not place it in restricted ventilation area. Also, do not allow the working charger to touch soft
surface such as pillows, blankets or clothing. The battery charger meets the limits on the surface
temperatures available to the user, as defined in the International Standard for Safety of Information
Technology Equipment (IEC 60950).
An electrostatic discharge occurs when two object touch each other, for example, an electric
charge that occurs when user touch metal door handle after walking on a carpet . Discharging
electrostatic charges from fingers or other electrostatic conductors can damage electronic
components. To avoid damaging the batteries, abstain from touching electrical outlets, wires and
electonic circuits. The user’s contact with electronic components should be kept to a minimum.
The II protection class device. It provides protection against electric shock against direct and
indirect contact, and thanks to the additional isolation it is not necessary to connect the device
case with the protective earth conductor.
The device is intended only for domestic use, indoors.
The manufacturer of the product is not responsible for damage or insults caused in effect
of disobey the safety instructions and informations contained in these user manual.
źKeep the product and the packaging out of range of children and animals. The package
includes a foil that child could choke while playing.
źIt is forbidden to apply the mechanical load to the product - strong shocks, impacts, dropping or
crushing may cause its damage.
źThe product operation in adverse conditions is not allowed. Adverse conditions are primarily:
exposure to direct sunlight, high or very low ambient temperatures, strong vibrations, high
humidity, surrounds of gases, dusts or flammable and aggressive liquids.
źIf the product has been damaged, does not work properly or has been stored for a long period
of time in bad or unfavorable conditions, safe operation of the device is not possible. It is
essential to stop using the product and to protect it against re-use for security purposes.
źProduct and power cord should not be touched with moist or wet hands under no
circumstances.
źShort-circuiting the current connection is prohibited.
źMake sure that the power cord is not crushed, bent, twisted, rubbed against sharp edges or
mechanically loaded in any other way. Avoid thermal load of the cable - in particular keep away
from heat sources (such as stoves, radiators, fireplaces).
źPower cords should be laid in such a way as to eliminate the risk of stumbling or hooking over.
źIt is forbidden to modify the power cord. In the case of modifications, the cable may be
damaged, causing threats to life, health and property.
źIt is forbidden to charge other types of batteries than AA/AAA, because it can cause explosion,
electric shock and personal injury.
źThe cells must be charge in pairs.
źBefore connecting the charger to the mains socket, make sure that the voltage specified on the
charger matches voltage supplied to the household socket.
źConnection of the charger to electricity is done by connecting added cable with the IEC C7 plug
to charger with IEC C8 connector and then connecting appropriate plug to grounded electrical
outlet.
źMains plug should be disconnect from power socket if the product is not in use for a long time.
battery charger
AK-BC-02 - user manual
p. 3
źWhen disconnecting the power cord from the socket and from the device, do not pull on the
cord, but only on the part of the cable plug provided for this purpose.
źShort-circuiting the current connection is prohibited.
źIn case of any doubts regarding operation, safety or connection of the product, please contact
the manufacturer or a qualified specialist for this purpose.
źAll maintenance, adjustment and repair work on the product may only be carried out by a
qualified person in a specialist facility.
Problem
Cause
Solution
A cell connected to an
electrical outlet via
charger does not charge
No mains voltage
źCheck the correct connection of
the charger to the mains socket
źCheck the mains fuses
The battery charger is
overloaded
źDisconnect the charger from the
power network, heck the
correctness of the current
parameters
Incorrect placement of
the cell in the charger
źPlace the cell according to the
polarity marked on the charger
There is a suspicion of a
product defect
źStop using and contact the
seller
Removing the most common problems
battery charger
1. Connect the charger via added power cord to the electrical outlet.
2. Place the cells in the battery charger in pairs.
3. Make sure that the cells are correct placed in the charger.
4. The LED diodes signals that the battery has been charged (charging process - shines bright
red color, after charging - shines pale red color).
5. After charging the cells, disconnect the charger from the mains socket, then remove the
cells.
Preparing the Battery Charger for Use:
Cleaning the power supply
źUse soft and antistatic cloth for cleaning the battery charger.
źDo not use abrasive or chemical cleaners.
Disconect the power supply from the electrical socket and connected devices before cleaning.

Produktspezifikationen

Marke: Akyga
Kategorie: Ladegerät
Modell: AK-BC-02

Brauchst du Hilfe?

Wenn Sie Hilfe mit Akyga AK-BC-02 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Ladegerät Akyga

Akyga

Akyga AK-BC-02 Bedienungsanleitung

18 August 2024
Akyga

Akyga AK-BC-01 Bedienungsanleitung

23 August 2023

Bedienungsanleitung Ladegerät

Neueste Bedienungsanleitung für -Kategorien-

MSW

MSW S-CHARGER-20A.2 Bedienungsanleitung

16 Oktober 2024
MSW

MSW S-CHARGER-10A.2 Bedienungsanleitung

16 Oktober 2024
ABB

ABB EVLunic Bedienungsanleitung

9 Oktober 2024
Powerplus

Powerplus POWDP9062 Bedienungsanleitung

8 Oktober 2024
Cellular Line

Cellular Line Wireless Power Dock Bedienungsanleitung

7 Oktober 2024
HQ

HQ CHARGER14 Bedienungsanleitung

4 Oktober 2024
Makita

Makita DC18RD Bedienungsanleitung

4 Oktober 2024
HQ

HQ CH02E Bedienungsanleitung

2 Oktober 2024
Venom

Venom VS5007 Bedienungsanleitung

1 Oktober 2024
Venom

Venom VS5010 Bedienungsanleitung

1 Oktober 2024