AJA FR2 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für AJA FR2 (18 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/18
www.aja.com
Installation and Operation
Guide
B e c a u s e i t m a t t e r s .
FR1 and FR2
Video Card Frames
(Models FR1, FR1-D, FR2 and FR2-D)
Published: 7/13/10
2
Trademarks
AJA, Io, and Kona are trademarks of AJA Video, Inc. All other trademarks are the property of their
respective holders.
Notice
Copyright Š 2010 AJA Video, Inc. All rights reserved. All information in this manual is subject to
change without notice. No part of the document may be reproduced or transmitted in any form, or by
any means, electronic or mechanical, including photocopying or recording, without the express
written permission of AJA Inc.
Contacting Support
To contact AJA Video for sales or support, use any of the following methods:
180 Litton Drive, Grass Valley, CA. 95945 USA
Telephone: +1.800.251.4224 or +1.530.274.2048
Fax: +1.530.274.9442
Web: http://www.aja.com
Support Email: support@aja.com
Sales Email: sales@aja.com
When calling for support, have all information on the product (serial number etc.) at hand prior to
calling.
Limited Warranty
AJA Video warrants that this product will be free from defects in materials and workmanship for a period of ve
years from the date of purchase. If a product proves to be defective during this warranty period, AJA Video, at its
option, will either repair the defective product without charge for parts and labor, or will provide a replacement in
exchange for the defective product.
In order to obtain service under this warranty, you the Customer, must notify AJA Video of the defect before the
expiration of the warranty period and make suitable arrangements for the performance of service. The Customer
shall be responsible for packaging and shipping the defective product to a designated service center nominated
by AJA Video, with shipping charges prepaid. AJA Video shall pay for the return of the product to the Customer if
the shipment is to a location within the country in which the AJA Video service center is located. Customer shall be
responsible for paying all shipping charges, insurance, duties, taxes, and any other charges for products returned
to any other locations.
This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate
maintenance and care. AJA Video shall not be obligated to furnish service under this warranty a) to repair damage
resulting from attempts by personnel other than AJA Video representatives to install, repair or service the product,
b) to repair damage resulting from improper use or connection to incompatible equipment, c) to repair any
damage or malfunction caused by the use of non-AJA Video parts or supplies, or d) to service a product that has
been modied or integrated with other products when the effect of such a modication or integration increases
the time or difculty of servicing the product.
THIS WARRANTY IS GIVEN BY AJA VIDEO IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED. AJA VIDEO
AND ITS VENDORS DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. AJA VIDEO’S RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE WHOLE AND
EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES IRRESPECTIVE OF WHETHER AJA VIDEO OR THE VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY OF
SUCH DAMAGES.
Important Safety Information
See the Safety & Regulatory information in Appendix A at the back of this manual.
1
3
AJA FR1 and FR2 Video Card Frames User Manual
Introduction
The AJA FR1 and FR2 are multiple-card frames that support both AJA’s R-series
video card modules and other industry standard modules. They bring high-
density packaging, high capacity power supplies, and forced fan cooling to
your rack—so you don’t need to reserve space above or below the frames.
Model FR1
The FR1 frame offers space for four modules in a 1-RU space. AJA’s own R5 and
R20 modules t into the frame, as well as industry standard modules. Color
black reference can be connected at a rear panel BNC for distribution passively
to all frame modules.
Model FR2
The FR2 frame provides greater space, housing up to ten modules in a 2-RU
space. Like the FR1, the FR2 supports both AJA’s own R-series modules as well
as industry standard modules. Color black reference in the FR2 is also
distributed to all modules, but it’s actively distributed rather than passively.
Optional redundant power supplies are available for the FR2 frame, and all
power supplies are easily hot-swapped from the front of the unit (one screw on
the rear panel must be removed on each power supply prior to removal).
Features
The FR1 and FR2 frames offer a variety of unique features for easy connectivity
and ease of installation in any environment.
FR1 and FR2 Frames
FR1 Features
•
Dual fan forced-air cooling
•
Optional redundant power supply, diode isolated
•
Universal power supply is auto-ranging from 90 to 240 VAC with 50 Watts
capacity
•
4 module slots (cells)
•
Each module cell is provided with 9 BNC inputs or outputs
•
Single frame reference BNC distributes passively to all cells
•
Remote power supply monitoring via RJ45 port on rear panel
•
Power LEDs on front panel show power status
•
Compatible with common industry frames—video cards only (Leitch™
6800-series)


Produktspezifikationen

Marke: AJA
Kategorie: Nicht kategorisiert
Modell: FR2

Brauchst du Hilfe?

Wenn Sie Hilfe mit AJA FR2 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert AJA

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂźr -Kategorien-