Aiwa AT-X80R Bedienungsanleitung

Aiwa Ohrstöpsel AT-X80R

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Aiwa AT-X80R (3 Seiten) in der Kategorie Ohrstöpsel. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/3
認識耳機
大 中 小
LED 燈
麥克風
充電金屬觸點
觸控板
調音孔
選擇並組裝耳套
雙耳機配對 恢復原廠設置 配戴耳機 單耳機使用模式 客戶服務功能介紹
產品保固
藍牙耳機售後服務 提示
警告
手動配對 (此方法適用於對耳失去連結的情況)
功能 狀態 操作/現象 LED
TWS相互配對
開機
關機
接聽/結束通話
拒接來電
喚醒語音助手
遊戲模式開關
音樂暫停/播放
切換上下
關機狀態,且未有配對紀
(首次使用) 長按觸控板1秒開機自動進入配對狀態 紅綠燈交替閃
關機狀態下長按5秒進入
藍牙配對模式 雙擊觸控板鍵一次進入TWS配對搜索
紅綠燈同時雙閃
聯上左耳進入配對狀態
右耳燈滅
關機狀態 按觸控板1秒 綠燈長亮1秒
充電狀態 充電盒拿起,耳機開機 綠燈長亮1秒
任意狀態
紅燈長亮2秒
放入充電盒,關機 紅燈長亮
來電響鈴中/通話中 雙擊觸控 \
來電響鈴 長按觸控板2秒 (要鬆手) \
已連結狀態 左邊三擊觸控板 \
音樂/視頻/遊戲過程右邊三擊觸控板 開/關 遊戲模
\
音樂狀態
\
音樂狀態下 左耳機長按2秒上一曲,右耳機長按2秒下一
雙擊觸控
入耳檢測功能:
1. 取下任何一個耳機,音樂暫停
2. 取下暫停後,15秒內戴上任何一個耳
音樂繼續播放 (初始狀態是在暫停狀態下,再戴上
不會繼續播放)
\
語音提示
TONE音
TONE音
TONE音
TONE音
TONE音
TONE音
TONE音
開啟: 嘟
關閉: 嘟嘟嘟
\
\
\
長按觸控板8秒 (未連接設備是可聯動關機)
Bluetooth QCY-T5 Pro
Forget This Device
Forget Device
Cancel
Settings Bluetooth
Bluetooth
QCY-T5 Pro
MY DEVICES
Connected
首次配對方法:
1. 取出兩隻耳機,再將兩隻耳機放回充電盒中。 (此步
驟為新機激活)
2. 再次取出兩隻耳機
3. 刷新手機藍牙設備列表,點擊配對AT-X80R,完成配對
*耳機取出會自動開機,若未自動開機,請充電後重新嘗試*
切換設備配對方法:
1. 關閉手機藍牙,耳機自動斷開進入配對模式
2. 刷新B手機藍牙設備列表,點擊配對AT-X80R,完成配
*不支持同時連接兩台手機,下次開機默認回連上次配對的手機*
已有連接過手機,在手機藍牙設備列表中,找到
AT-X80R,點擊進入設置,選擇忽略或取消配對。
取出兩隻耳機,同時長按8秒,直至紅燈長亮2秒後熄
滅,表示調為關機狀態。
重新同時長按兩隻耳機大約10秒,直至紅綠燈同時閃3
次,紅燈閃1次,表示耳機重置成功。
*恢復出廠後用首次配對的方法連接即可正常使用*
1.
2.
3.
關機狀態下,觸摸觸控板5秒,直至紅綠燈交替閃,再次觸
摸兩次觸摸板,操作成功後,紅綠燈會同時閃爍(雙耳同時
操作)如果出現主耳紅綠交替閃爍,副耳滅燈的情況,則為
兩隻耳機配對成功。
當手機來電時,雙擊觸摸板接聽電話進行通話;當手機有
新來電時,雙擊觸摸板保持上一個通話,進行第二個來電
的通話。
長按觸摸板2秒可以隨意切換兩個通話。
三方通話接聽與切換通話
耳機放入充電盒中,即關機進入充電狀態,充電時紅燈常
亮,充滿電後綠燈常亮1分鐘後熄滅。
給耳機充電
當電量<30% ,兩個綠燈閃亮;當電量在30%~90%,
左邊綠燈常亮,右邊綠燈閃亮;當電量>90%以上,
兩個綠燈常亮。
※AT-X80R充電盒支援無線充電器充電
給充電盒充電
配對名稱:
藍牙版本:
待機時間:
充電時間:
音樂播放:
通話時間:
連結距離:
電池類型:
耳機電池容量:
充電盒電池容量:
充電盒輸入參數:
支持協議:
AT-X80R
V5.0
約70小
約2小時
約4-5小
約4小時
10米 (無障礙環境下)
聚合物鋰電池
3.7V 40mAh
3.7V 600mAh
5V 500mA
HSP/HFP/A2DP/AVRCP
產品參數
當手機來電時,雙擊觸摸板接聽電話進行通話;當手機有
新來電時,長按觸摸板2秒拒接新來電,繼續保持當前通話
拒接第二個來電
將耳帽斜向下輕輕塞入耳道,以輕擺頭部耳機不晃動
為宜。
通話時,將耳機麥克風朝向嘴部可使通話更清晰。
1.
2.
耳機在關機狀態下,任一耳機長按觸控板約5秒,進入
配對狀態(紅綠燈交替閃爍)
打開手機藍牙搜索配對名,選擇AT-X80R點擊連接。
1.
2.
有關產品的更多資訊,請參考我們網站 www.int-ai-
wa.com。
您可以參考內附的保卡,聯絡當地的aiwa授權經銷商或
是客服中心。
請參閱包裝盒中提供的保固標籤。
注意: 拆卸設備不在保固範圍內。
注意: 液體浸沒不在保固範圍內。
售後服務與支持
保修期:
自產品購買之日起12個月(請妥善保管購買憑證)
免費服務:
在產品保修期內,凡屬產品本身質量引起的故障,請用戶憑購買憑證與經
銷商取得聯繫以享受售後服務。
1、自您購買之日起7日內,本產品出現故障,經由售後服務中心確定為產
品質量問題,可享受修理、更換、退貨的服務。
2、自您購買之日起15日內,本產品出現故障,經由售後服務中心確定為
產品質量問題,可享受修理或更換的服務。
3、自您購買之日起12個月內,本產品出現故障,經由售後服務中心確定
為產品質量問題,可享受修理的服務。
如有任何產品損害或瑕疵非可歸責於產品質量本身,則不在保修範圍內。
有下列情形者不屬於保修範圍內:
1、因天災、地震、雷擊、異常電壓、環境因素而發生之故障或毀損的。
2、自行或委託未經原廠授權維修之廠商拆卸、改裝或更換非原廠零件。
3、使用操作人為使不當成損,如浸水
蝕、掉落、擠壓或露在異常溫濕度環境下。
有害物質名稱及含量
有害物質
部件名
Pb Hg Cd
Cr
(VI) PBB PBDE DIBP DEHP DBP BBP
耳機主
電池
耳套
配件
充電線
本表格依據 SJ/T 11364 的規定編制
O:表示該有害物質在部件所有均勻材質中的含量均在(EU)2015/863規定
限量要求以下。
X :表示該有害物質至少在該部件的某一均質材料中的含量超出
(EU)2015/863規定的限量要求,但目前行業無成熟的替代方案,在豁
免範圍仍符合歐盟ROHS指令的環保要求。
使用年限
如本手冊所述,在正常使用條件下,本產品的環保使用期限為10年。
在此期間,產品不會洩漏任何危險物質,本產品可以回收,必須按照當地
法規處理。
1.
2.
3.
4.
5.
使用產品前請仔細閱讀本使用說明書並妥善保管;
首次使用時,請先將本產品充滿電;
如果產品長期(超過2周)不使用,請對其充電;
必須選擇正規廠家生產且經過國家認證的充電器;
若手機無法搜索藍牙耳機,請確認藍牙耳機是否處
於”配對模式”,若長時間未進行配對或連接,藍牙
耳機配對功能將關閉,請重新開啟藍牙耳機至”配
對模式”;若手機程出錯,請重啟手機;若藍牙耳機
程序出錯,請重啟藍牙耳機或者恢復出廠設置。
1.
2.
3.
4.
5.
請勿以任何理由拆除或維修改裝耳機,否則可能會
導致起火;電子擊穿甚至徹底損壞產品。
請勿將產品置於溫度過低或過高(0 以下或45 C以° °
上的環境下)。
請避免靠近兒童或動物的眼睛使用產品指示燈。
請勿在雷暴天氣下使用該產品,雷暴可導致本產品
工作不正常並增加觸電的危險。
請勿使用油品及其他揮發性液體擦拭本產品。
注意:長時間使用耳機可能會造成聽力損害,請合理安排使用時間。
本耳機不支持輸出超過2A的充電座給耳機充電,否則會損害耳機本體。
Aiwa Electronics Int’l Co., Ltd.
Explore more at www.int-aiwa.com
六價鉻 多溴
聯苯
多溴
二苯醚
磷苯二
甲酸二
異丁酯
磷苯二
甲酸
磷苯二
甲酸二
丁酯
磷苯二
甲酸
半酯
AT-X80R
真無線藍牙耳機
Overview
L M S
LED
Mic
Pogo Pins
Touch bar
Tuning Hole
Choose Your Eartips
How to Pair Reset Your Earbuds How to Wear Single Side Earbuds Usage Warranty Card FCC Statement TipsFunc�on Introduc�on
Caveats
Connecting L and R side earbuds to each other
Product Parameters
Model Number:
Date of Purchasing:
User’s Phone:
User’s Name:
User’s Address:
Shop’s Name:
Shop’ Address:
Comments:
Pairing name: AT-X80R
Bluetooth version: V5.0 Stand-by time: approx. 70hrs
Charging time: approx. 2hrs Playback time: approx. 4-5 hrs
Operation range: 10m(with no obstacle)
Battery type: li-ion
Battery capacity(earbud):3.7V 40mAh
Battery capacity(charging case):3.7V 600mAh
Input parameter(charging case):5V 500mA
Bluetooth profiles: HSP/HFP/A2DP/AVRCP
Please try medium eartips first as they fit most people.
Functions Current status LEDOperation/result
Connecting L & R
side earbuds
together
Power-on
Power-off
Answer/end call
Ignore call
Voice assistant
Gaming mode
Music pause/play
Skip track
Earbuds are off.
(No previous pairing record)
Depress touch sensor for 1s to power up earbuds.
Earbuds will automatically enter pairing mode.
LED blinks
red and green
Earbuds are off.
1. Depress both touch sensors (L & R) for approx. 5
s/ until the LED indicator lights flashes red and
green.
2. Double tap touch sensors
LED blink red and
green then right LED
turns off
Earbuds are OFF and out of
the charging case Long press touch sensor for approx. 1s LED glows green
for 1s
Earbuds inside the charging
case Remove earbuds from the case LED glows green
for 1s
Power-on
LED glows red for 2s
Pop earbud into the case to power off LED glows red
Incoming call/calling Double tap touch sensor \
Incoming call Long press touch sensor for approx. 2s \
Connected Triple tap touch sensor \
Playing/gaming Triple tap touch sensor to switch on/off gaming
mode.
\
Music playing
\
Music playing Long press left earbud for previous track.
Long press right earbud for next track.
Double tap touch sensor to pause /play.
In-Ear Detection
1. Music will pause when either earbuds are
removed from ear.
2. Wearing it again within 15 seconds will
resume music playback .
\
Prompt
TONE
TONE
TONE
TONE
TONE
TONE
TONE
On: two beeps
Off: three beeps
\
\ Beep
\
Long press touch sensor for approx. 8s
Bluetoo th QCY-T5 Pro
Forget This De vice
Forget Device
Cancel
Settings Blue tooth
Bluetoo th
QCY-T5 Pro
MY DEVICES
Connecte d
Initial Pairing:
1. Remove both earbuds from charging case.
2. Re-insert them back into the charging case.
3. Remove them again to activate the earbuds.
4. Turn on BT on your mobile device and connect
to “AT-X80R”
*Upon successful pairing, earbuds will automatically power
up once removed from the charging case, if not please
charge and repeat initial pairing process*
Switching between mobile devices:
1. Turn off mobile device BT function to disconnect.
2. Earbuds automatically enter pairing mode.
3. Turn on BT on your second mobile device and
connect to “AT-X80R”
*Multi-device connection is not available.*
*Earbuds will auto reconnect to the last connected device
upon powering up again*
Disconnect and erase any history of your
earbuds from your device manually from your
device’s BT list.
Pick up both earbuds and depress both touch
sensors (L & R) simultaneously for approx. 8s/
until the LED indicator light glows red to power
off.
Depress both touch sensors (L & R) simultane-
ously again for approx. 10s/ until the LED indictor
light flashes red and green.
Factory reset is successful. Please refer to the
“Initial Pairing:” page of the manual to attempt
to pair your earbuds with your device again.
1.
2.
3.
4.
Power off both earbuds.
Depress both touch sensors (L & R) for approx. 5
s/ until the LED indicator light flashes red and
green.
Double tap touch sensors and both earbud’s
LED indicator light should flash red and green.
One side earbud’s indicator light shut down +
the other side earbud’s indicator light flashes
red and green indicates successful connection.
1.
2.
3.
4.
Call Control
Charging Your Earbuds
Simple place earbuds back into charging case to
charge then up.
*Red indicator lights indicate charging in progress*
*Green indicator lights indicate charging complete*
Charging Your Charging Case
Battery capacity > 30%
(2 flashing green lights)
Battery capacity 30%-90%
(Solid green on the left side, Blinking green on the
right side)
Battery capacity >90%
(Both lights are solid green)
*The charging case supports wireless charging*
Select a suitable sized silicone ear tip for your ear
size.
Adjust the mic towards your voice to enjoy a
better calling experience .
1.
2.
Depress touch sensor of preferred earbud side
for approx. 5s to enter pairing mode.
Connect to “AT-X80R” accordingly.
1.
2.
Double tap touch sensor to answer an incoming
call.
Long press touch sensor to ignore call.
Double tap touch sensor to put the first call on
hold and answer a second incoming call.
Long press touch sensor (2s) to ignore a second
call.
Long press touch sensor to switch between an
active and held call.
1.
2.
3.
4.
5.
Warranty duration: 12 months after purchase
(Please inquire with your local distributor for more
specific information.)
Warranty does not cover:
1. Damages caused by un-authorized disassembly.
2. Defects or physical damages caused by user.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation.
This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more
of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for
help.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
MAD N CE I HINA FCC RD ID: R-IN1933
Hazardous subs ances and t their contents in the item
Hazardous Substances
Pa rt
N eam Pb Hg Cd Cr
(VI) PBB PBDE DIBP DEHP DBP BBP
Main body
Battery
Ear tips
Acces riesso
Charging
cable
This form is made by SJ/T 11364 regulation.
O means that hazardous substance content in the
homogeneous materials of this part is within the
limits of (EU 2015/863 regulation .
X means that hazardous substance content in ,at least,
one certain homogeneous material of this part is
beyond the limits of (EU 2015/863 regulation ,but
there is no mature alternative in the industry at present,
it still conforms to the EU ROHS Directive in the scope
of exemption.
Notes: Please arrange using time properly as your hearing
may be damaged by using the device for a long time.
1.
2.
3.
4.
5.
Before using the headset, please read the manual
carefully and keep it for future references.
The headset need to be fully charged prior to
first-time use.
3. If the headset is left unused for over two weeks,
please recharge it periodically.
Please use the chargers made by qualified manufac-
turer.
If the headset cannot be found by your phone, please
check whether it is in pairing mode; if left unconnect-
ed for a long while, the headset will exit pairing mode,
please re-enter the mode; if a procedure error of your
phone occurs, reboot it; if a procedure error of the
headsetoccurs, reboot or reset it.
1.
2.
3.
4.
5.
6.
Never disassemble or modify your headset for any
reasons to avoid any damages and danger.
Do not store the headset in extreme temperatures
(under 0ºC over 45ºC).
Avoid using the indicator close to the eyes of children
or animals.
Do not use this headset during a thunderstorm to
avoid irregular function and increased risk of
electricshock.
Do not use harsh chemicals or strong detergents to
clean the headset.
Keep the headset dry.
Aiwa Electronics Int’l Co., Ltd.
Explore more at www.int-aiwa.com
AT-X80R
True Wireless Earphones


Produktspezifikationen

Marke: Aiwa
Kategorie: Ohrstöpsel
Modell: AT-X80R

Brauchst du Hilfe?

Wenn Sie Hilfe mit Aiwa AT-X80R benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Ohrstöpsel Aiwa

Bedienungsanleitung Ohrstöpsel

Neueste Bedienungsanleitung für -Kategorien-