Aiptek Pencam Compact Bedienungsanleitung

Aiptek Digitalkamera Pencam Compact

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Aiptek Pencam Compact (42 Seiten) in der Kategorie Digitalkamera. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/42
My digital eye!
English
PENCAM COMPACT
Installation Guide
How to Use Your Digital Camera
***Notes ***
When the batteries are unloaded, all of your stored pictures will be
lost.
Introduction
User Interface
Installing Batteries
The camera is capable of taking and storing 26 VGA(640 x 480
Pixels) images or 107 QVGA(320 x 240 Pixels) Images. These
images may be uploaded to a PC via the USB port.
The camera has two switches on it.
SW1 is the shutter switch.SW2 is the mode switch.
The LCD display is combined with SW2 to show the setting
information.
The is powered by 2 AAA batteries, or via the USB
connector when attached to a PC.
Digital Camera
Switching the camera on
Pressing the SW2 when the LCD is blank will power
on the camera. The camera will automatically
power off after 30 seconds of inactivity. The LCD
indicates the camera mode either "Lr" for low
resolution (QVGA images) or "Hr" for high
resolution(VGA images). The LCD then displays the
number of pictures you have remaining.
Taking a picture
Press the shutter button to take a picture. A high pitched beep indicates that the picture was taken
successfully and the counter will decrease accordingly. A low beep indicates insufficient light to take a
picture. A series of beeps is an indication that the camera is full.
Additional features
Pressing the mode switch repeatedly cycles through additional features as displayed on the LCD. When a
given feature is displayed it may be selected by pressing the shutter button. If an option is not selected
within 5 seconds the display will revert back to the number of available pictures.
ENGLISH
My digital eye!
View Finder
Lens
USB Port
LCD Display
Shutter Switch( )SW1
Mode Switch( )SW2
Battery Cover
Press SW2 to change features
Features are displayed
Press SW1 to select mode
(Picture remaining number)
ON
OFF
Self Timer
Pressing the mode button until "St" appears in the
LCD then pressing the shutter button will start a 10
second self-timer. The camera will issue a short
beep every second and then a longer beep. The
next beep indicates that the picture has been taken.
Note: The self-timer can not be selected when the
camera is full.
Switch mode to "St"
"St" will be displayed
Press SW1 to initiate
the self-timer mode
Switch mode to "Ct"
"Ct" will be displayed
Press SW1 to utilize
Continuous mode
Continuous mode
Pictures may be taken continuously as long as the
shutter button is pressed(and the camera is not full)
as follows:
Press the mode button until the Ct appears in the
LCD. Pressing the shutter button within 5 seconds
will cause the camera to start taking pictures for as
long as the shutter button is held down. If the shutter
button is not pressed within 5 seconds the camera
will revert back to normal picture taking. Note:
During the continuous mode the camera will allow
pictures to be taken with incorrect exposure.
Clearing the stored images
Press the mode button until CL appears on the
LCD. Pressing the shutter button once will cause
the camera to beep and the CL will start flashing .
Pressing the shutter button again within 5 seconds
will clear the camera and reset the picture counter.
Changing the picture resolution
Picture resolution may only be changed when the
camera memory is empty. If any pictures have
been taken then the memory must first be cleared.
To change resolution press the mode switch until
the resolution option is displayed, either Hr to
change to high resolution mode (if you are currently
in the low resolution mode)or Lr to change to low
resolution(if you are currently in the high resolution
mode). The camera will beep and the display will
reset to indicate the number of pictures available.
Switch mode to "CL"
"CL" will be displayed
Press SW1 to
select clear mode
LCD will start flashing
Click SW1 twice to clear
the memory
Switch mode to "Hr" or "Lr"
"Hr" or "Lr" will be displayed
Press SW1 to change resolution
ENGLISH
My digital eye!


Produktspezifikationen

Marke: Aiptek
Kategorie: Digitalkamera
Modell: Pencam Compact

Brauchst du Hilfe?

Wenn Sie Hilfe mit Aiptek Pencam Compact benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Digitalkamera Aiptek

Bedienungsanleitung Digitalkamera

Neueste Bedienungsanleitung für -Kategorien-