AEG WS 125 S Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für AEG WS 125 S (23 Seiten) in der Kategorie Schleifer. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/23
GB
D
F
I
E
P
NL
S
FIN
WSL 125 XS
WSL 125 X
WS 100 S
WS 115 S
WS 125 S
Instructions for use
Please read and save these
instructions.
Gebrauchsanleitung
Bitte lesen und aufbewahren.
Instruction d’utilisation
Prière de lire et de conserver.
Istruzioni d’uso
Si prega di leggere le istruzioni e
di conservarle.
Instrucciones de uso
Lea y conserve estas
instrucciones por favor.
Instruções de serviço
Por favor leia e conserve em seu
poder.
Gebruiksaanwijzing
Lees en let goed op deze
adviezen.
Bruksanvisning
Var god läs och tag tillvara dessa
instruktioner.
Käyttöohje
Lue ja säilytö
1A 24R 4BF
09
1A 24R 4BF
09
bsa nr 451
suiva nr.
275
GB
1 WSL 115 XS, WSL 125 X, WS 100 S, WS 115 S, WS 125 S
Your standards are high and you have opted for
quality from Atlas Copco.
Make good use of your new electric power tool, we
have built it with great care, but first read the
instruction booklet.
A power tool only performs at its best when
properly handled.
AEG Electric Power Tools from Atlas Copco
1 Illustrations
1 Spindle lock
2 Gear neck
3 Working spindle
4 Screw
5 Guard
6 Back flange
7 Working tool
8 Flange nut
9 Steel–wire brush (Accessory*)
10 On-/off switch
11 Additional side handle
12 Backing pad (Accessory*)
13 Abrasive paper (Accessory*)
14 Clamping flange (Accessory*)
15 Guide shoe and Wheel guard (Accessory*)
*Not included in standard equipment, available as an accessory
2 Technical data
WSL 115 XS WSL 125 X WS 100 S WS 115 S WS 125 S
Nominal power 710 W 710 W 710 W 710 W 710 W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
No-load speed 10 000 min–1 10 000 min–1 10 000 min–110 000 min–110 000 min–1
. . . . . . . . . . . . . . .
Grinding disc diameter 115 mm 125 mm 100 mm 115 mm 125 mm. . . . . . . . . . . . . . . . . . . . . . . .
Backing pad diameter 110 mm 110 mm – 110 mm 110 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Thread of working spindle M 14 mm M 14 mm M 10 mm M 14 mm M 14 mm. . . . . . . . . . . . . .
Weight 1,6 kg 1,6 kg 1,6 kg 1,6 kg 1,6 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 Safety Instructions
Please note safety instructions on red sheet
4000 3330 24!
Appliances used at many different locations
including open air must be connected via a
current surge preventing switch.
Always wear goggles when using the machine. It
is recommended to wear gloves, sturdy non
slipping shoes and apron.
Do not pierce the motor housing as this could
damage the double insulation (use adhesives).
Always disconnect the plug from the socket
before carrying out any work on the machine.
Keep mains lead clear from working range of the
machine. Always lead the cable away behind you.
Only plug-in when machine is switched off.
Always use the additional handle.
Only use diamond cutting discs that are sharp
and in perfect condition. Replace diamond cutting
discs at once if they have splits or are deformed.
Accessories must be limited to 10,000 rpm.
When cutting stone, a guide has to be used.
Always use guard when grinding or cutting.
Due care should be taken that sparks flying from
the work piece do not contact inflammable
materials.
Before setting the machine into motion tighten
flange nut.
In special cases e. g. when the machine is used
under extreme humid conditions or is very
contaminated with conductive dusts, we
recommend the use of an ELCB safety switch
(earth leakage circuit breaker) to increase your
personal safety.
Typically the A-weighted sound pressure level of
the tool is 85 dB (A).The noise level when
working can exceed 85 dB (A). Wear ear
protectors!
Typically the weighted acceleration is :
3 m/s2 (WSL 115 XS, WS 100 S, WS 115 S)
4 m/s2 (WSL 125 X, WS 125 S)
Do not use this product in another way as stated
for normal use.
!
2WSL 115 XS, WSL 125 X, WS 100 S, WS 115 S, WS 125 S
4 Before you use this tool
Always disconnect the plug from the socket
before carrying out any work on the machine.
4.1 Installation of Guard
Place guard on the gear neck (LEERER MERKER)
of the machine and then tighten screw
(LEERER MERKER).
The position of the guard can be adjusted to the
requirements of the work process. When making
this adjustment, take care to ensure that the
grinding disc can rotate freely.
4.2 Installation of Grinding Disc
Secure working spindle (LEERER MERKER) by
pressing spindle lock (LEERER MERKER).
Only press spindle lock when the machine is
turned off.
Mount back flange (LEERER MERKER), grinding
disc (LEERER MERKER) and flange nut
(LEERER MERKER) according to the illustration
and tighten flange nut with a pin–type spanner.
When the thickness of the disc is less than 5,5 mm
use the flange nut with the flat side against the
grinding disc.
4.3 Mains connection
Connect only to a single-phase AC current supply
and only to the mains voltage specified on the
rating plate. Connection to sockets without earth
protection is possible as the appliance features
protective insulation to DIN 57 740/ VDE 0740 and
CEE 20. Radio suppression complies with the
European standard EN 55014.
When fitting the plug, make sure that the brown
(live) wire of this appliance is connected to the plug
terminal marked L or coloured red, and the blue
(neutral) wire of this appliance is connected to the
plug terminal marked N or coloured black. Under no
circumstances must the wires of this appliance be
connected to the earth terminal of the plug marked
either E, with the earth symbol or coloured green or
green/yellow.
5 On-off switch
Intermittant Use
Switching on: Push forward on–off control
(LEERER MERKER) without pressure
Switching off: Release on–off control
Continuous Use
Switching on: Push forward on–off control
(LEERER MERKER) without pressure and then
press the button. On–off control will remain on.
Switching off: Press on–off control then release.
6 Operation
When grinding do not apply pressure to the
workpiece by bearing down on the machine but
move the grinding disc backward and forward over
the working surface.
Grinding
For best results with grinding discs, keep the disc at
an angle at least 30o to the working surface.
Overloading the machine during grinding operations
will harm the machine, reduce disc life and produce
inferior results.
Never use cutting discs for grinding operations.
Cutting
When cutting, avoid tilting the grinder away from
the cutting plane.
When cutting stone, the use of the guide
(LEERER MERKER is necessary.
For grinding larger areas use backing pad with
abrasive paper.
For removal of old paint and for derusting use steel
brush.
7 Accessories
The range of accessories with part numbers is
shown in our catalog.
8 Service
The ventilation slots of the machine must be kept
clear at all times.
Use only AEG accessories and spare parts. Should
components need to be replaced which have not
been described, please contact one of our AEG
service agents (see our list of guarantee/service
addresses).
If needed, an exploded view of the tool can be
ordered. Please state the ten–digit No. as well as
the machine type printed on the label and order the
drawing at your local service agents or directly at:
Atlas Copco Elektrowerkzeuge GmbH,
Postfach 320, D–71361 Winnenden.
Modifications: Text, diagrams and data are correct at the time of
printing. In the interest of continuous improvement of our
products, technical specifications are subject to alteration without
prior notice.
Produktspezifikationen
| Marke: | AEG |
| Kategorie: | Schleifer |
| Modell: | WS 125 S |
Brauchst du Hilfe?
Wenn Sie Hilfe mit AEG WS 125 S benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schleifer AEG
31 August 2023
31 Mai 2023
25 April 2023
7 November 2022
30 Oktober 2022
Bedienungsanleitung Schleifer
- Schleifer Cotech
- Schleifer Makita
- Schleifer Adler
- Schleifer Bosch
- Schleifer Flex
- Schleifer Parkside
- Schleifer Vonroc
- Schleifer Gorenje
- Schleifer Powerfix
- Schleifer ECG
- Schleifer Black And Decker
- Schleifer Cocraft
- Schleifer FERM
- Schleifer Ryobi
- Schleifer Skil
- Schleifer Trotec
- Schleifer Eibenstock
- Schleifer Hilti
- Schleifer DeWalt
- Schleifer Einhell
- Schleifer Festool
- Schleifer Worx
- Schleifer Nuova Simonelli
- Schleifer Hikoki
- Schleifer Hitachi
- Schleifer Hazet
- Schleifer Kress
- Schleifer Metabo
- Schleifer Stanley
- Schleifer Güde
- Schleifer Scheppach
- Schleifer Workzone
- Schleifer Meec Tools
- Schleifer Proxxon
- Schleifer Westfalia
- Schleifer Husqvarna
- Schleifer Chicago Pneumatic
- Schleifer Silverline
- Schleifer Sthor
- Schleifer Robust
- Schleifer Yato
- Schleifer Genesis
- Schleifer Mirka
- Schleifer Toolland
- Schleifer ABB
- Schleifer Milwaukee
- Schleifer Fein
- Schleifer Craftsman
- Schleifer Powerplus
- Schleifer Alpha Tools
- Schleifer Ozito
- Schleifer Kawasaki
- Schleifer Porter-Cable
- Schleifer Global
- Schleifer Steren
- Schleifer Victoria Arduino
- Schleifer Einhell Bavaria
- Schleifer Urrea
- Schleifer Ergotools Pattfield
- Schleifer Bavaria By Einhell
- Schleifer Classic Power
- Schleifer SW-Stahl
Neueste Bedienungsanleitung für -Kategorien-
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
25 Juni 2024
24 Juni 2024