AEG SB2E 760 R Bedienungsanleitung
AEG
Schlagbohrmaschinen
SB2E 760 R
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für AEG SB2E 760 R (84 Seiten) in der Kategorie Schlagbohrmaschinen. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/84
GB
D
F
I
E
P
NL
DK
S
SF
TR
RUS
RC
SBE 600 R
SB2E 680 R
SB2-700
SB2E 700 R
SB2E 700 RS
SB2E 705 PLUS
SB2E 750 R
SB2E 760 R
Instructions for use
Please read and save these
instructions.
Gebrauchsanleitung
Bitte lesen und aufbewahren.
Instruction d’utilisation
Prière de lire et de conserver.
Istruzioni d’uso
Si prega di leggere le istruzioni e
di conservarle.
Instrucciones de uso
Lea y conserve estas
instrucciones por favor.
Instruções de serviço
Por favor leia e conserve em seu
poder.
Gebruiksaanwijzing
Lees en let goed op deze
adviezen.
Brugsanvisning
Vær venlight at læse og
opbevare.
Bruksanvisning
Var god läs och tag tillvara dessa
instruktioner.
Käyttöohje
Lue ja säilytö
Kullanøm kølavuzu
Lütfen okuyun ve saklayin
Èíñòðóêöèÿ ïî
èñïîëüçîâàíèþ
Ïîæàëóéñòà, ïðî÷òèòå è
ñîõðàíèòå íàñòîÿùóþ
èíñòðóêöèþ
12
1
ENGLISH SBE 600 R, SB2E 680 R, SB2-700, SB2E 700 R, SB2E 700 RS, SB2E 705 PLUS, SB2E 750 R, SB2E 760 R
You have high standards and expect to purchase quality goods – quality offered by
Atlas Copco.
We have built a durable and reliable electric power tool for you.
Please read the instructions for use before first operation so you can handle your
power tool effectively and safely.
We are sure that buying an AEG Electric Power Tool from Atlas Copco was the right
choice!
SBE 600 R SB2E 680 R SB2–700
Nominal power 600 W 705 W 700 W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
No-load speed 0–3100 min-1
. . . . . . . . . . . . .
1st gear 0–1350 min-1 1500 min-1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2nd gear 0–3200 min-1 3600 min-1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Percussion rate 49600 min-1 51200 min-1 51200 min-1
. . . . . . . . . . . . . . . . . . .
Drilling capacity in
Concrete 20 mm 20 mm 20 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Brick and tile 20 mm 24 mm 24 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Steel 13 mm 13 mm 13 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wood 35 mm 40 mm 40 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Drill opening range 1,5-13 mm 1,5-13 mm 1,5–13 mm. . . . . . . . . . . . . . . . . .
Drive shank 1/2
” ” ”x20 1/2 x20 1/2
x20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chuck neck diameter 43 mm 43 mm 43 mm. . . . . . . . . . . . . . . . . . . . . . . . . .
Weight 1,9 kg 2,2 kg 2,2 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SB2E 700 R SB2E 750 R SB2E 760 R
SB2E 700 RS
SB2E 705 PLUS
Nominal power 705 W 750 W 760 W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
No-load speed
1st gear 0–1350 min-1 0 1350 min–-1 0 1350 min–-1
. . . . . . . . . . . . . . . . . . . . .
2nd gear 0–3200 min-1 0 3200 min–-1 0 3200 min–-1
. . . . . . . . . . . . . . . . . . . . .
Percussion rate 51200 min-1 51200 min-1 51200 min-1
. . . . . . . . . . . . . . . . . . .
Drilling capacity in
Concrete 20 mm 20 mm 20 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Brick and tile 24 mm 24 mm 24 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Steel 13 mm 13 mm 13 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wood 40 mm 40 mm 40 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Drill opening range 1,5
– –13 mm 1,5
13 mm 1,5-13 mm. . . . . . . . . . . . . . . .
Drive shank 1/2
” ” ”x20 1/2 x20 1/2
x20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chuck neck diameter 43 mm 43 mm 43 mm. . . . . . . . . . . . . . . . . . . . . . . . . .
Weight 2,5 kg 2,5 kg 2,5 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
J Please pay attention to the safety instructions in the attached leaflet!
J Dust that arises when working on material containing asbestos or stonework
containing crystalline silicic acid is harmful to the health. Please follow accident
prevention regulations.
J Appliances used at many different locations including open air must be connected
via a current surge preventing switch.
J Always wear goggles when using the machine. It is recommended to wear gloves,
sturdy non slipping shoes and apron.
J Sawdust and splinters must not be removed while the machine is running.
J Do not pierce the motor housing as this could damage the double insulation (use
adhesives).
J Always disconnect the plug from the socket before carrying out any work on the
machine.
Only plug-in when machine is switched off.
J Keep mains lead clear from working range of the machine. Always lead the cable
away behind you.
J Always use the auxiliary handle, even if the machine has a safety clutch since this
safety clutch only engages when the machine blocks with a jerk.
J Do not use diamond core drills on hammer mode.
J When drilling in walls ceiling, or floor, take care to avoid electric cables and gas or
waterpipes.
Introduction
Technical Data
Advice for your
safety
2
ENGLISH SBE 600 R, SB2E 680 R, SB2-700, SB2E 700 R, SB2E 700 RS, SB2E 705 PLUS, SB2E 750 R, SB2E 760 R
Typically the A-weighted noise levels of the tool are:
Sound pressure level = 92 dB (A). Sound power level = 105 dB (A).
Wear ear protectors! Measured values determined according to EN 50 144.
Typically the weighted acceleration is 12 m/s
2.
Measured values determined according to EN 50 144.
Measured sound
value
Measured
vibration value
Brief description
1
12
Lock button for switch locking
Modifications: Text, diagrams and data are correct at the time of printing. In the
interest of continuous improvement of our products, technical specifications are
subject to alteration without prior notice.
Ergonomically designed
housing with soft grip.
Switch trigger for switching
the machine on and off, and
for smooth starting and
varying speed.
Auxiliary handle, has an integral depth gauge
and can be rotated in various positions.
Reversing lever for changing from forward to
reverse rotation – due to a lockout mechanism,
switching the lever is only possible if the On-/Off
switch is not depressed. (not for SB2–700)
Fully insulated metal gear box for durability and
protection from electric shock.
Gear lever for switching between 1st and 2nd
gear.(not for SBE 600 R)
Built-in safety clutch helps prevent the
machine from rotating if the drill bit jams.
(only applicable for SB2E 700 RS, SB2E 705
PLUS)
Bit reception – it is possible to fit drill bits directly
into the working spindle.
(not for SB2 700)–
Three jaw chuck
(according to standard
equipment)
Keyless chuck for tightening
without a key.(according to standard
equipment)
Bit storage for
compartment
screwdriver bits
Adjuster wheel for speed presetting
(not for SB2 700)–
Selector lever for switching between
drilling and percussion drilling.
Produktspezifikationen
| Marke: | AEG |
| Kategorie: | Schlagbohrmaschinen |
| Modell: | SB2E 760 R |
Brauchst du Hilfe?
Wenn Sie Hilfe mit AEG SB2E 760 R benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schlagbohrmaschinen AEG
10 Juli 2024
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
Bedienungsanleitung Schlagbohrmaschinen
- Schlagbohrmaschinen Makita
- Schlagbohrmaschinen Bosch
- Schlagbohrmaschinen Parkside
- Schlagbohrmaschinen Vonroc
- Schlagbohrmaschinen Black And Decker
- Schlagbohrmaschinen FERM
- Schlagbohrmaschinen Ryobi
- Schlagbohrmaschinen Skil
- Schlagbohrmaschinen Bort
- Schlagbohrmaschinen DeWalt
- Schlagbohrmaschinen Maktec
- Schlagbohrmaschinen Luxor
- Schlagbohrmaschinen Hikoki
- Schlagbohrmaschinen Hitachi
- Schlagbohrmaschinen Metabo
- Schlagbohrmaschinen Milwaukee
- Schlagbohrmaschinen Narex
- Schlagbohrmaschinen Ronix
Neueste Bedienungsanleitung für -Kategorien-
13 Oktober 2024
14 Juli 2024
14 Juli 2024
13 Juli 2024
13 Juli 2024
13 Juli 2024
13 Juli 2024
13 Juli 2024
12 Juli 2024
12 Juli 2024