AEG HBSE 100 Bedienungsanleitung
AEG
Bandschuurmachines
HBSE 100
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für AEG HBSE 100 (32 Seiten) in der Kategorie Bandschuurmachines. Dieser Bedienungsanleitung war für 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/32
GB
D
F
I
E
P
NL
DK
S
FIN
HBS 100
HBSE 100
Instructions for use
Please read and save these
instructions.
Gebrauchsanleitung
Bitte lesen und aufbewahren.
Instruction d’utilisation
Prière de lire et de conserver.
Istruzioni d’uso
Si prega di leggere le istruzioni e
di conservarle.
Instrucciones de uso
Lea y conserve estas
instrucciones por favor.
Instruções de serviço
Por favor leia e conserve em seu
poder.
Gebruiksaanwijzing
Lees en let goed op deze
adviezen.
Brugsanvisning
Vær venlight at læse og
opbevare.
Bruksanvisning
Var god läs och tag tillvara dessa
instruktioner.
Käyttöohje
Lue ja säilytö
2
ENGLISH HBS 100, HBSE 100
You have high standards and expect to purchase quality goods – quality offered by
Atlas Copco.
We have built a durable and reliable electric power tool for you.
Please read the instructions for use before first operation so you can handle your
power tool effectively and safely.
We are sure that buying an AEG Electric Power Tool from Atlas Copco was the
right choice!
HBS 100 HBSE 100
Nominal power 1010 W 1010 W. . . . . . . . . . . . . . . . . . . . . . . . . . .
Belt speed no load 350 m/min 230–350 m/min. . . . . . . . . . . . . . . . . . .
Sanding width 100 mm 100 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Belt length 560 mm 560 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sanding surface 100 x 140 mm 100 x 140 mm. . . . . . . . . . . . . . . . .
Weight 4,2 kg 4,2 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Please pay attention to the safety instructions in the attached leaflet!
Dust that arises when working in wood or using the tool on industrial material can be
dangerous to health. In this case connect the tool to a suction device (e.g. Atlas
Copco absorbtion system AS 3 W).
Appliances used at many different locations including open air must be connected
via a current surge preventing switch.
Always wear goggles when using the machine. It is recommended to wear gloves,
sturdy non slipping shoes and apron.
Sawdust and splinters must not be removed while the machine is running.
Do not pierce the motor housing as this could damage the double insulation (use
adhesives).
Always disconnect the plug from the socket before carrying out any work on the
machine.
Only plug-in when machine is switched off.
Keep mains lead clear from working range of the machine. Always lead the cable
away behind you.
When sanding metal the dust suction facility should not be used, because of the risk
of fire from flying sparks.
Typically the A-weighted noise levels of the tool are:
Sound pressure level = 91 dB (A).
Sound power level = 104 dB (A).
Wear ear protectors!
Typically the hand-arm vibration is below 2.5 m/s
2.
Connect only to a single-phase AC current supply and only to the mains voltage
specified on the rating plate. Connection to sockets without earth protection is
possible as the appliance features protective insulation to DIN 57 740/ VDE 0740
and CEE 20. Radio suppression complies with the European standard EN 55014.
When fitting the plug, make sure that the brown (live) wire of this appliance is
connected to the plug terminal marked L or coloured red, and the blue (neutral) wire
of this appliance is connected to the plug terminal marked N or coloured black.
Under no circumstances must the wires of this appliance be connected to the earth
terminal of the plug marked either E, with the earth symbol or coloured green or
green/yellow.
The belt sander can be used for sanding wood, plastics and metal.
Do not use this product in another way as stated for normal use.
Introduction
Technical Data
Advice for your
safety
Measured sound
value
Measured
vibration value
Mains
connection
Use
3
ENGLISH HBS 100, HBSE 100
Always disconnect the plug from the
socket before carrying out any work on the
machine.
Prior the changing belt, adjust sanding belt
by turning the belt adjusting screw approx.
2–3 cm in the direction of the open side of
the machine beyond the rollers, whilst the
machine is running, as the new sanding
belt can sometimes brush against the
machine housing.
1. Pull the clamping lever forwards
2. Remove the worn belt and fit the inside of
the belt is pointing in the same direction as
the arrow on the machine.
3. Push the clamping lever back again
4. Taking a test run, position the sanding belt
with the aid of the belt adjusting screw so
that it is flush with the outer edge of the
sanding belt support.
The speed is adjusted by means of the
electronic thumb wheel.
A = lowest speed
F = highest speed
Brief description
Modifications: Text, diagrams and data are correct at the time of
printing. In the interest of continuous improvement of our products,
technical specifications are subject to alteration without prior notice.
Integrated dust removal
Locking button
On-/off switch
Suction connector
Adjusting screw for belt
Dust bag
Electronic thumb wheel (only
applicable for HBSE 100)
Changing the
belt
Setting speed of
rotation
(only applicable
for HBSE 100)
HBSE
electronic
Produktspezifikationen
| Marke: | AEG |
| Kategorie: | Bandschuurmachines |
| Modell: | HBSE 100 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit AEG HBSE 100 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Bandschuurmachines AEG
13 Juli 2024
Bedienungsanleitung Bandschuurmachines
- Bandschuurmachines Makita
- Bandschuurmachines Parkside
- Bandschuurmachines Black And Decker
- Bandschuurmachines Bort
- Bandschuurmachines Festool
- Bandschuurmachines Draper
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
8 Juli 2024
7 Juli 2024
7 Juli 2024
6 Juli 2024
5 Juli 2024