Adwa ECO209 Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Adwa ECO209 (2 Seiten) in der Kategorie Messung. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
USER MANUAL
ECO209 - pH Monitor
ISTECO209 09/14
WARRANTY
This instrument is warranted from all defects in materials and
manufacturing for a period of 2 years from the date of purchase.
Electrodes and probes are warranted for a period of 6 months.
If during this period, the repair or replacement of parts is required,
where the damage is not due to negligence or erroneous operation by
the user, please return the parts to either dealer or our office and the
repair will be effected free of charge.
Note: We reserve the right to modify the design, construction and
appearance of our products without advance notice.
SPECIFICATIONS
Range 0.0 to 14.0 pH
Resolution 0.1 pH
Accuracy (@25°C) ±0.2 pH
pH electrode AD1230B
Calibration Manual, 2-point, through trimmers
Environment 0 to 50 ºC, 95% RH max
Power supply External, 12 Vdc
Dimensions 120 x 134 x 54 mm
Weight approx. 250 g
ACCESSORIES
AD1230B pH electrode with plastic body, double junction BNC
connector and 2 m cable
AD70004P pH 4.01 buffer solution, 20 ml sachet (25 pcs.)
AD70007P pH 7.01 buffer solution, 20 ml sachet (25 pcs.)
AD70010P pH 10.01 buffer solution, 20 ml sachet (25 pcs.)
AD70000P Rinse solution, 20 ml sachet (25 pcs.)
GENERAL OPERATIONS
• The unit is supplied complete with AD1230B pH electrode.
Connect the electrode to the BNC connector on the bottom of
the meter. Do not be alarmed if white crystals appear around
the electrode protective cap. They dissolve by simply rinsing
with water.
• If the electrode is dry, soak the tip in electrode rinse solution
for one hour to reactivate it.
• Connect the supplied 12 Vdc adapter to the power supply
connector and to the mains.
• Make sure the unit has been calibrated for pH before using it.
• The meter is supplied with a differential input and a stainless
steel probe to prevent potential grounding problems.
• For taking measurements remove the protective cap from the
pH electrode and immerse the tips (4 cm) of both pH electrode
and grounding probe into the solution to be measured, then
shake briefly.
• The display will show the pH value. Wait a few seconds for
the reading to stabilize and the meter will start continuous
monitoring.
• To turn the unit off simply unplug the 12 Vdc adapter from the
mains.
CALIBRATION PROCEDURE
A new pH meter must always be calibrated before use.
The ECO209 pH-Monitor can be calibrated manually over 2 points,
at pH 7 and pH 4 (or pH 10).
If you are going to measure acidic samples (pH value between
0 and 7), it is suggested to calibrate with pH 7.01 and pH 4.01
buffer solutions.
If your samples are alkaline (pH value between 7 and 14), use
pH 7.01 and pH 10.01 buffer solutions.
• Immerse the tips of electrode and grounding
probe in a new pH 7 calibration solution and
allow the reading to stabilize.
• Using a small screwdriver adjust the pH 7
calibration trimmer to read pH "7.0".
• Rinse the electrode in the rinse solution.
• Immerse the tips of electrode and grounding
probe in a new pH 4 (or pH 10) solution and
wait for the reading to stabilize.
• Adjust the pH 4 calibration trimmer to read
pH "4.0" (or pH "10.0").
• The pH calibration procedure is now complete and the meter
is ready for use.
CALIBRAT ION 
SOLUTION
pH ELECTRODE MAINTENANCE
• The electrode should always be kept moist and wet. If the
electrode dries out, soak it in rinse solution for at least 1 hour.
• When not in use, rinse the electrode with water and store it
with a few drops of pH 7 or rinse solution in the protective
cap.
• Always replace the protective cap after use.
Produktspezifikationen
| Marke: | Adwa |
| Kategorie: | Messung |
| Modell: | ECO209 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Adwa ECO209 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Messung Adwa
21 Mai 2024
30 März 2024
5 September 2023
Bedienungsanleitung Messung
- Messung Hama
- Messung REV
- Messung Voltcraft
- Messung Bosch
- Messung Laserliner
- Messung Velleman
- Messung Powerfix
- Messung Alecto
- Messung Beurer
- Messung Bresser
- Messung König
- Messung TFA
- Messung Black And Decker
- Messung Trotec
- Messung DeWalt
- Messung Pioneer
- Messung Megasat
- Messung Smartwares
- Messung Garmin
- Messung GOCLEVER
- Messung Perel
- Messung Workzone
- Messung Microlife
- Messung Rossmax
- Messung Amprobe
- Messung Meec Tools
- Messung Metrix
- Messung IHealth
- Messung Ansmann
- Messung Westfalia
- Messung Livington
- Messung Silverline
- Messung Yato
- Messung Be Cool
- Messung Toolland
- Messung AS Schwabe
- Messung Hager
- Messung Kyoritsu
- Messung Eurolite
- Messung GW Instek
- Messung KERN
- Messung Milwaukee
- Messung Eizo
- Messung Testo
- Messung Victron Energy
- Messung Peak
- Messung Kübler
- Messung Carrier
- Messung Lund
- Messung SHX
- Messung Gima
- Messung Testboy
- Messung Danfoss
- Messung Fantini Cosmi
- Messung Multimetrix
- Messung Extech
- Messung BENNING
- Messung Fluke
- Messung FLIR
- Messung Vemer
- Messung Oregon Scientific
- Messung Ridgid
- Messung Stabila
- Messung Hikmicro
- Messung Entes
- Messung Gossen Metrawatt
- Messung Hameg
- Messung Joy-it
- Messung Megger
- Messung Muller
- Messung PCE Instruments
- Messung RK Technology
- Messung Sanwa
- Messung Sonel
- Messung Uni-T
- Messung VirtuFit
- Messung Wachendorff
- Messung TFA Dostmann
- Messung Vimar
- Messung Owon
- Messung PeakTech
- Messung Comark
- Messung Dahua Technology
- Messung YSI
- Messung Aluratek
- Messung SRS
- Messung Eltako
- Messung H-Tronic
- Messung HT Instruments
- Messung Beha-Amprobe
- Messung Chauvin Arnoux
- Messung Werma
- Messung Eastron
- Messung Emko
- Messung Pancontrol
- Messung X-Rite
- Messung CESYS
- Messung Trumeter
- Messung Kemo
- Messung ORNO
- Messung Tempest
- Messung TDE Instruments
- Messung Zircon
- Messung Kreg
- Messung Apollo Ultrasonic
- Messung BJZ
- Messung Greisinger
- Messung Qubino
- Messung Beckmann & Egle
- Messung Weidmüller
- Messung Janitza
- Messung CEM
- Messung Klein Tools
- Messung Daytronic
- Messung AREXX
- Messung Delta Ohm
- Messung Camille Bauer
- Messung Rigel Medical
- Messung UHoo
- Messung Seaward
- Messung AstroAI
- Messung P3 International
- Messung Seek Thermal
- Messung ClimeMET
- Messung Fixpoint
- Messung Condtrol
- Messung Cliff
- Messung Water-i.d.
- Messung Stahlwille
- Messung KS Tools
- Messung AkYtec
Neueste Bedienungsanleitung für -Kategorien-
4 August 2024
24 Juni 2024
24 Juni 2024
23 Juni 2024
23 Juni 2024
23 Juni 2024
23 Juni 2024
22 Juni 2024
21 Juni 2024
21 Juni 2024