Adidas ADH2120 Bedienungsanleitung

Adidas Armbanduhr ADH2120

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Adidas ADH2120 (76 Seiten) in der Kategorie Armbanduhr. Dieser Bedienungsanleitung war für 24 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/76
ANALOG
TIME SETTING (3 HAND)
1. Pull crown out to position 2.
2. Turn counter-clockwise to advance the time and continue
until the day changes to the present day.
3. Set to the correct time.
4. Push crown back to position 1
DATE SETTING (3 HAND DATE)
1. Pull the crown out to position 2.
2. Turn the crown either clockwise or counter-clockwise
and set the date for the previous day.
The direction that moves the date varies on different watch models.
TIME SETTING
1. Pull crown out to position 2.
2. Turn counter-clockwise to advance the time and continue
until the day changes to the present day.
3. Set to the correct time.
4. Push crown back to position 1
TIME SETTING 2 HAND (DISC)
1. Pull crown out to position 2.
2. Turn the crown either clockwise or counter-clockwise
3. Set to the correct time.
4. Push crown back to position 1
DUALTIME/ DAY/ DATE (3 EYE WITH DATE)
DAY/ TIME SETTING
1. Pull crown out to position 3.
2. Turn crown clockwise to set day and time.
3. Return crown to position 1.
NOTE: If the date is set between the hours of around 9:00 PM and 1:00 AM,
the date may not change on the following day.
DATE SETTING
1. Pull crown out to position 2.
2. Turn crown clockwise to set date.
3. Return crown to position 1.
DUAL TIME SETTING
1. Press A to set dual time hand forward in 15 minute increments.
2. Press B to set dual time hand backward in 15 minute increments.
NOTE: Dual time hand can be advanced rapidly by continuously pressing A or B.
CHRONOGRAPH STOPWATCH (3 EYE WITH DATE)
TIME AND DATE SETTING
1. Before setting the time, make sure the chronograph is stopped and set to zero [12:00] position.
2. Pull crown out to position 2.
3. Turn crown clockwise until the previous day’s date is displayed.
4. Pull crown out to position 3 when the second hand is at the 12:00 position.
5. Turn crown to set time.
Note: 24-hour hand moves correspondingly with the hour and minute hands.
When setting the time be sure to check that the 24-hour hand is set properly.
6. Return crown to position 1.
Note: When the crown is in position 2, do not press the pushers. Otherwise
the chronograph hands will move.
HOUR DISC MINUTE DISC
HOUR DISC
MINUTE DISC
1
1 2 2
A
B
DAY OF WEEK
HOUR HAND
DUAL TIME
24 HOUR
MINUTE HAND
DATE WINDOW
SECOND HAND
1 2 3
SECOND HAND
MINUTE HAND
DATE WINDOW
1 2 3
HOUR HAND
HOUR HAND
MINUTE HAND
SECOND HAND
1 2
A
B
CHRONO
SECOND HAND
24 HOUR HAND
CHRONO
MINUTE HAND
1 2 3
CHRONOGRAPH
1. Press A to start/stop the chronograph.
2. Press B to reset to zero.
CHRONOGRAPH ZERO RESET
1. If either of the chronograph hands is not at the zero (12:00) position, pull crown out to position 3.
2. Press A to move hands clockwise; press B to move hands counter-clockwise.
3. Return crown to position 1.
CHRONOGRAPH 2 EYE WITH DATE (WITH OR WITHOUT DATE)
TIME AND DATE SETTING
1. Before setting the time, make sure the chronograph is stopped
and set to zero [12:00] position.
2. Pull crown out to position 2.
3. Turn crown clockwise until the previous day’s date is displayed.
4. Pull crown out to position 3 when the second hand is at the 12:00 position.
5. Turn crown to set time.
Note: 24-hour hand moves correspondingly with the hour and minute hands.
When setting the time be sure to check that the 24-hour hand is set properly.
6. Return crown to position 1.
Note: When the crown is in position 2, do not press the pushers. Otherwise the chronograph hands will move.
CHRONOGRAPH
1. Press B to start/stop the chronograph.
3. Press A for Split time, Press A again to restart
2. Press A to reset to zero.
CHRONOGRAPH ZERO RESET
1. If either of the chronograph hands is not at the zero (12:00) position, pull crown out to position 3.
2. Press A to move hands clockwise; press B to move hands counter-clockwise.
3. Return crown to position 1.
CALAGARY (QFL769BB/QFL873AC)
NORMAL TIME DISPLAY
1. Press A for EL.
2. Press C to select T1 or T2 format.
3. Press D to toggle chime on/off.
TIME/CALENDAR SETTING
1. In time mode, press and hold D for 2 seconds to enter time setting; hour
will begin ashing.
2. Press C to increase setting value. Press D to decrease setting value.
3. Press B to enter next setting eld.
4. Setting sequence is hour, minute, second, year month, date,12/24 Hr.
5. Press A to exit setting mode.
CHRONOGRAPH MODE
1. Press B to enter chrono mode.
2. Press D to select split or lap mode. Split mode will display the full time of all records after
each split. Lap mode will display only the new lap time after each record has been recorded.
3. Press C to start chrono.
4. Press C again to split time.
5. Repeat step 4 until desired number of laps have been reached (maximum 10).
6. Press D to stop chrono.
7. To review, press B to enter recall mode before resetting.
8. Press D again to reset chrono.
A
B
CHRONO
SECOND HAND
SECOND HAND
CHRONO
MINUTE HAND
1
23
TIMER MODE
1. Press B to change to timer mode.
2. Press C to start timer.
3. Press C to stop timer. Press D to reset the timer when it is stopped.
TIMER SETTING
1. In timer mode, press and hold A to enter setting mode; timer type will begin ashing.
2. Press C and D to select count down stop, count down repeat, or count up timer.
3. Press B to advance to next setting eld.
4. Press C to decrease and D to increase.
5. Press B to set and advance to next setting value.
6. Setting sequence is timer type, hour, minute, second.
7. Press A to save data and exit setting mode.
NOTE: Alarm will sound at 2 beeps per second, and will beep for 30 seconds after timer reaches zero.
ALARM MODE
1. Press B to change to alarm mode.
2. Press C to toggle between alarms 1, 2, 3, 4.
3. Press D to enable the alarm; press D again to disable the alarm.
4. Press B to exit alarm mode.
ALARM SETTING
1. In alarm mode, press and hold A to enter setting mode, hour will begin ashing.
2. Press C to increase; press D to decrease.
3. Press B to set and advance to next setting value.
4. Setting sequence is hour, minute.
5. Press A to exit setting mode.
DENVER/ CANDY / SYDNEY (UPCR-780A-P07 / QUPCR-823A-P03 /QUPCR-780A-3-P16)
NORMAL TIME DISPLAY
1. Press A for EL.
2. Press C to select T1 or T2 format.
TIME/CALENDAR SETTING
1. In time mode, press and hold D for 2 seconds to enter time
setting; hour will begin ashing.
2. Press C to increase setting value.
3. Press B to enter next setting eld.
4. Setting sequence is hour, minute, day, year, month, date.
5. Press D to exit setting mode.
ALARM MODE
1. Press B to enter alarm mode.
2. Press C to toggle alarm/chime on/off.
3. Press D to select Home Alarm or T2 Alarm.
ALARM SETTING
1. Press and hold D for 2 seconds to enter alarm setting; hour will begin ashing.
2. Press C to increase setting value.
3. Press B to set minutes.
4. Press D to exit setting mode.
NOTE: Alarm turns on automatically when exiting setting mode.
A
B
C
D


Produktspezifikationen

Marke: Adidas
Kategorie: Armbanduhr
Modell: ADH2120

Brauchst du Hilfe?

Wenn Sie Hilfe mit Adidas ADH2120 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Armbanduhr Adidas

Bedienungsanleitung Armbanduhr

Neueste Bedienungsanleitung für -Kategorien-