Adder ALDV100P Bedienungsanleitung

Adder Audio-/Video-Extender ALDV100P

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Adder ALDV100P (4 Seiten) in der Kategorie Audio-/Video-Extender. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

Your AdderLink DV100 package

The AdderLink DV100 allows you to extend HDMI digital video over a maximum of 50 meters of

twisted pair cable with the minimum of infrastructure and fuss. It is simply powered via USB from

the transmitter end, so that no additional power supply is required at the receiver, simultaneously

saving time and space as well as making installation very straightforward.

In addition to this brief guide, your package should contain the following:

Supplied items

AdderLink DV100

User Guide

Warranty

Adder Technology Ltd warrants that this product shall be free from defects in workmanship and

materials for a period of two years from the date of original purchase. If the product should fail to

operate correctly in normal use during the warranty period, Adder will replace or repair it free of

charge. No liability can be accepted for damage due to misuse or circumstances outside Adder’s

control. Also, Adder will not be responsible for any loss, damage or injury arising directly or indi-

rectly from the use of this product. Adder’s total liability under the terms of this warranty shall in

all circumstances be limited to the replacement value of this product.

Regulatory information

EMC directive 2004/108/IEC

This equipment has been tested and found to comply with the limits for a class A computing

device in accordance with the speciﬁcations in the European standard EN55022. These limits are

designed to provide reasonable protection against harmful interference. This equipment gener-

ates, uses and can radiate radio frequency energy and if not installed and used in accordance

with the instructions may cause harmful interference to radio or television reception. However,

there is no guarantee that harmful interference will not occur in a particular installation. If this

equipment does cause interference to radio or television reception, which can be determined by

turning the equipment on and off, the user is encouraged to correct the interference with one

or more of the following measures: (a) Reorient or relocate the receiving antenna. (b) Increase

the separation between the equipment and the receiver. (c) Connect the equipment to an outlet

on a circuit different from that to which the receiver is connected. (d) Consult the supplier or an

experienced radio/TV technician for help.

FCC compliance statement (United States)

This equipment generates, uses and can radiate radio frequency energy and if not installed

and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause

interference to radio communications. It has been tested and found to comply with the limits for

a Class A computing device in accordance with the speciﬁcations in Subpart J of part 15 of FCC

rules, which are designed to provide reasonable protection against such interference when the

equipment is operated in a commercial environment. Operation of this equipment in a residential

area may cause interference, in which case the user at his own expense will be required to take

whatever measures may be necessary to correct the interference. Changes or modiﬁcations not

expressly approved by the manufacturer could void the user’s authority to operate the equipment.

What you may additionally need

PSU-LPV-KIT

External power

adapter and USB

adapter cable.

This power kit is only required if the host

computer or other device with a USB

port cannot provide sufﬁcient power.

Safety information

• Foruseindry,oilfreeindoorenvironments.

• Ensurethatthetwistedpairinterconnect

cable is installed in compliance with all ap-

plicable wiring regulations.

• Donotconnecttheinterconnectcableto

any other equipment, particularly network

or telecommunications equipment.

• Donotattempttoservicetheunitsyourself.

Transmitter unit

Receiver unit

ALDV100P package includes: 1 transmitter unit and 1 receiver unit

©2013AdderTechnologyLimited•Alltrademarksareacknowledged.

PartNo.MAN-QS-ALDV100-ADDER•Release1.0d

Web: www.adder.com

Contact: www.adder.com/contact-details

Support: forum.adder.com

Connecting your AdderLink DV100

Power control

IMPORTANT: Do not connect the transmitter unit, via the CATx cable, to anything other than

the receiver unit.

Low voltage power for the receiver unit is fed via the same link cable as is used for the video.

The transmitter unit always performs a check before applying power along the link cable.

The transmitter unit will disable the power if:

• Thecableisdisconnected,or

• Linepowerisoverloaded.

Transmitter unit

1 Connect the plugs to the HDMI video

output socket and a vacant USB port on

the computer. Note: The USB connection

provides only power for the units.

2 Attach one end of the link cable to the

socket at the end of the transmitter unit.

Receiver unit

1 Connect the video plug to the HDMI

socket on the display screen.

2 Attach the other end of the link

cable to the socket at the end of the

receiver unit.

IMPORTANT:

• Useonlyscreened(FTP)cable(CAT6orbetter)toconnectthetwounits.

• Donotconnectthetransmitterunit,viatheCATxcable,toanythingotherthan

the receiver unit.

Video and USB

connections to the

host computer.

Video connection

to the display

screen.

Green LED: Flashes to

show the unit is operating.

Yellow LED: Flashes if

HDCP encoded content is

present in the video feed.

Green LED: Flashes to show unit is operating.

Yellow LED: Flashes when the receiver unit is

being checked. On when the receiver unit has

been veriﬁed and power applied to it.

HDMI operation

The AdderLink DV100 can support HDMI video (including 480p, 720p and 1080p) and audio up

toamaximum165MHzclockrate.

High-bandwidth Digital Content Protection (HDCP) is supported, however, the Consumer

Electronics Control (CEC) scheme is not.

Video display (EDID) information

Extended Display Identiﬁcation Data (or EDID) is an industry standard scheme which allows

video displays to declare their capabilities to the computer’s video adapter circuitry, allowing

thelattertooptimizetheiroutputsaccordingly.Sincethewidespreadadoptionofthescheme,

video adapters have become increasingly dependent on receiving relevant EDID information

during start-up, before they will output anything more than a rudimentary video signal.

Each time that the AdderLink DV100 units are powered on, the receiver unit attempts to read

the EDID information from the connected video display. The information is then transferred to

the transmitter unit and made available to the computer’s video adapter when required.

Cable considerations

Toensurecorrectoperation,Category6(orbetter)shieldedtwistedpaircable,nolongerthan

50 meters in length, must be used to connect the transmitter and receiver units. The use of

shielded cables is important to maintain compliance with radio frequency energy emission

regulations and ensure a suitably high level of immunity to electromagnetic disturbances.

For best results, Adder recommends S/FTP CAT7 cable such as Adder part number VSCAT7-50.

Patch panels or cable couplers should only be used close to the transmitter unit, connected by

CAT7 patch cables of no more than 2m in length. The overall cable run must be reduced by 5m

if a coupling is used.

Produktspezifikationen

Marke:	Adder
Kategorie:	Audio-/Video-Extender
Modell:	ALDV100P
Gewicht:	250 g
Produktfarbe:	Schwarz
Zertifizierung:	CE, FCC
Typ:	AV-Sender & -Empfänger
Abmessungen (BxTxH):	63 x 21 x 30 mm
Maximale Auflösung:	1920 x 1200 Pixel
Arbeitsspannung:	5 V