Adastra SA180 Bedienungsanleitung
Adastra
Lautsprecheranlage
SA180
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Adastra SA180 (8 Seiten) in der Kategorie Lautsprecheranlage. Dieser Bedienungsanleitung war fĂĽr 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/8
SA180
Secure Wall Amplifier with UHF Microphone
Item ref: 148UK 953.
User Manual
Version 1 .0
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
SA180 User Manual
Introduction
Thank you for choosing the Adastra SA180 secure wall amplifier as part of your public address system. This amplifier is
designed to offer high quality, dependable service for mobile and installed systems. Please read this manual fully and
follow the instructions to achieve the best results with your new purchase and to avoid damage through misuse.
SAFETY SYMBOL AND MESSAGE CONVENTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE NE PAS
OUVRIR
This symbol indicates that dangerous voltage constituting a risk of electric shock is
present within this unit
This symbol indicates that there are important operating and maintenance instructions in
the literature accompanying this unit.
SAFETY NOTICE
1. Prior to use, read through this manual
2. Keep the manual in good condition
3. Pay attention to safety warnings
4. Observe all operating requirements
5. Do not use the device near water or wet areas
6. For cleaning, only use a lint-free, dry cloth
7. Install according to the specifications
8. Place away from heat sources or heating appliances
9. Use mains lead provided and avoid damage to cable or connectors
10. Unplug power from mains during stormy weather or if unused for long periods
11. In case of malfunction, water ingress or other damage, consult qualified service personnel
12. Do not place in damp areas or near liquids or moisture. Do not spill liquids on the housing
13. Please pay attention to warning symbols during transit and placement
14. Terminals marked with the symbol are HAZARDOUS LIVE and should only be connected by qualified personnel
15. Ensure that the apparatus is connected to a mains socket with a protective EARTH connection
16. Ensure correct operation of the mains switch
Warning
To prevent the risk of fire or electric shock, do not expose any components to rain or moisture.
If liquids are spilled on the casing, stop using immediately, allow unit to dry out and have checked by qualified personnel before
further use. Avoid impact, extreme pressure or heavy vibration to the case
No user serviceable parts inside not open the case refer all servicing to qualified service personnel. –Do –
Safety
• Check for correct mains voltage and condition of IEC lead before connecting to power outlet
• Use double insulated speaker wire with adequate current rating for 100V speaker connections
• Only use one type of output i.e. - , 70V or 100V do not mix or combine these outputs on a single zone or output –4 16Ω –
• Do not connect - or 70V terminal or 100V/70V speakers to the - 4 16Ω speakers to the 100V 4 16Ω terminal
• Do not allow any foreign objects to enter the case or through the ventilation grilles
Placement
• Keep out of direct sunlight and away from heat sources
• Keep away from damp or dusty environments
• For rack-mounting, use the rack ears provided and ensure adequate support for the weight of the amplifier
• Ensure adequate air-flow and do not cover cooling vents at the front and rear of the amplifier
• Ensure adequate access to controls and connections
Cleaning
• Use a soft cloth with a neutral detergent to clean the casing as required
• Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups
• Do not use strong solvents for cleaning the unit
SA180 User Manual
Front panel
Bottom panel
Connections
Connect the bottom panel IEC inlet (24) to the mains using the supplied mains lead
(or an equivalent approved type). Ensure that the mains voltage is correct (230Vac)
and the mains outlet is switched on. Mains and speaker output connections are fed
through the bottom of the cabinet and the wires can be bundled together and fed
through a securing plate (supplied) to deter tampering with the connections.
The SA180 has a total of 4 input channels. INPUT 1 and INPUT 2 are connected by either XLR or 6.3mm jack
to the combo connectors on the front panel (6). It is important to determine which type of input source is
connected and make the appropriate selection on the input type selector switch (5).
If the input is a standard microphone, slide the switch to “MIC”.
If the input is a condenser microphone which requires phantom power, slide the switch to “PHANTOM”.
If the input is a line level input (CD player, MP3 player, electronic keyboard etc.), slide the switch to “LINE”.
AUX 1 input is connected via a mini jack (3.5mm stereo) to accept a line input from smart phone, tablet or
laptop etc. If the input is stereo, the left and right sides will be mixed (summed) to mono. This input shares a
channel with the internal media player (see below) and is controlled by the AUX1/MEDIA volume control (14)
AUX 2 input is connected via a twin RCA connector to accept a line input. If the input is stereo, the left and
right sides will be mixed (summed) to mono. This input is independent of the media player and is controlled
by the AUX 2 volume control (15)
Further mixer-amplifiers or slave amplifiers can be connected from the LINE OUT RCA sockets 6). (1
This output carries the full mix of all channels, including the media player, as fed to the speakers.
1.
SD card slot
2.
Output level meter
3.
BASS EQ control
4.
Input 1 + 2 VOLUME controls
5.
Input 1 + 2 input type selector switches
6.
Input 1 + 2 combo XLR/jack input sockets
7.
AUX 1 mini jack input (3.5mm stereo)
8.
Media player display
9.
USB port
10.
UHF wireless microphone receiver antenna
11.
UHF wireless microphone volume control
12.
TREBLE EQ control
13.
MASTER volume control
14.
AUX 1 / MEDIA volume control
15.
AUX 2 volume control
16.
LINE OUT RCA connectors
17.
POWER on/off switch
18.
AUX 2 RCA input connectors
19.
Mains voltage switch
20.
IEC mains inlet & fuse holder
21.
DC power terminals
22.
COM speaker terminal
23.
4 - speaker terminal 16Ω
24.
100V speaker terminals
Produktspezifikationen
| Marke: | Adastra |
| Kategorie: | Lautsprecheranlage |
| Modell: | SA180 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Adastra SA180 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Lautsprecheranlage Adastra
13 August 2024
7 August 2024
Bedienungsanleitung Lautsprecheranlage
- Lautsprecheranlage NGS
- Lautsprecheranlage Trust
- Lautsprecheranlage Yamaha
- Lautsprecheranlage Denver
- Lautsprecheranlage Trevi
- Lautsprecheranlage Pyle
- Lautsprecheranlage Sennheiser
- Lautsprecheranlage Skytec
- Lautsprecheranlage Vonyx
- Lautsprecheranlage Peavey
- Lautsprecheranlage Karma
- Lautsprecheranlage Behringer
- Lautsprecheranlage Monacor
- Lautsprecheranlage Korg
- Lautsprecheranlage Anchor Audio
- Lautsprecheranlage LD Systems
- Lautsprecheranlage Vorago
- Lautsprecheranlage DAP Audio
- Lautsprecheranlage Naxa
- Lautsprecheranlage Pure Acoustics
- Lautsprecheranlage Steren
- Lautsprecheranlage Nady
- Lautsprecheranlage Majestic
- Lautsprecheranlage Hamilton Buhl
Neueste Bedienungsanleitung fĂĽr -Kategorien-
6 September 2024
3 September 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024