Adastra S260-WIFI Bedienungsanleitung

Adastra Hi-Fi-Anlage S260-WIFI

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Adastra S260-WIFI (9 Seiten) in der Kategorie Hi-Fi-Anlage. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/9
S260-WIFI
Internet Streaming Amplifier
Item ref: 103.1 26UK
User Manual
Version 1.2
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
103.1 UK User Manual26
Introduction
Thank you for choosing the S -WIFI internet radio streaming amplifier as part of your 260
background music system. The wireless connectivity of this product brings together online
audio content and smart phone app control for almost unlimited playback possibilities.
Front panel
Rear panel
Connections and S ting Up et
Position the S260-WIFI on a stable surface within cl r reception of the local WiFi signal and where ea
controls and connections accessible. are
The unit is powered by the supplied in- 24Vdc power adaptor. With the power switched off, connect line
the DC jack of the power adaptor to the rear panel power inlet (11) and connect the mains lead to t he
fig.8 socket of -line adaptor with the mains plug connected to a suitable mains outlet. the in
Supplied with the amplifier are 2 antennas. Both of these need to be connected to the SMA sockets on
the rear of the amplifier, labelled WIFI ANT and BT ANT (6, 10) to enable clear reception of WIFI and ” “
Bluetooth signals.
The S260-WIFI amplifier can also play mp3 tracks stored onto a USB pen drive or microSD (TF) ca rd.
These should be inserted into the relevant USB port or microSD sl on the front panel (1, 2) ot
If an external playback device to be used connect to the L+R LINE IN RCA sockets on the rear is , this
panel . (7)
1
USB Port
2
microSD card slot
3
Media player controls
4
Media player display
5
Power switch
6
WiFi antenna socket
7
AUX ( R RCA) IN L+
8
Left Speaker output
9
Right Speaker output
10
Bluetooth antenna socket
11
24Vdc power inlet DC jack
103.1 UK User Manual26
The S260-WIFI delivers up to 30W per channel at 8 the speaker output on the rear panel (8, 9). to s
Connect an 8 speaker to each output with power handling up to 3 each by unscrewing the binding of 0W
posts and securing the + wire to the + post and - wire to the - post for left and right channel “ ” “ ” s.
Alternatively, connect speakers (8 , 30W in parallel to each output (4 speakers total) for up to 60W 2 x )
per channel (shared across the 2 speakers) .
Warning The minimum impedance load per channel is 4 . :
( x 8 speakers wired in parallel = 4 )2
Note: Suitable speaker cable would be ² or 6A rated fig.8 speaker cable. 0.66mm
Operation
When all connections are made, switch the power on (5) to the amplifier and the power switch will lig . ht
All signals through amplifier are controlled via the media player section on the front panel (3, 4) the
Input modes are determined by the SOURCE button. Pressing this will cycle through the input options.
(WPS will be described on the next page)
If a playback device is connected to the rear panel AUX inputs (7), select AUX mode for this source.
For any input source, hold down to reduce output volume or to increase the volume  
When a USB pen drive or microSD card inserted to the relevant port or slot on the front panel (1, 2), is
playback will normally start automatically. Otherwise, select USB or SD by pressing the SOURCE button
and then press the button to play the track (press the same button to pause the track)  .
Navigate through tracks on the USB or mic SD using the buttons. ro or
To connect a smart phone wirelessly via Bluetooth, select BT using the SOURCE button.
Search for S260-WIFI in the smart phone Bluetooth menu and select to pair for audio playback. Once
paired, the display will stop flashing. Playback and navigation can be controlled on the phone or via the
  , or buttons.
A handheld I.R. remote control is suppli with the S260-WIFI with controls similar to those on the front ed
panel and numerical keypad for direct track selection. a
The S260-WIFI amplifier is capable Fi streaming, which can access y internet radio station or a of Wi an
subscription service with pre-determined playlists for continuous playback directly from the internet.
In this mode, the audio stream is initially set up and controlled by a smart phone a pp.
To enable this feature, select the WIFI option from the SOURCE button and perform LEGACY PLAthe YER
setup as shown in the instructions on the following pages.
To reset the S260-WIFI to factory settings, press and hold the WPS button for 5 seconds, then release.
This will disconnect the S260-WIFI from the local WiFi network.
The S260-WIFI can be pai d to any WiFi network by the setup process described in the following pages. re

AUX line input (rear L+R RCA input)
BT
Bluetooth receiver mode
USB  :
USB drive playback
SD  :
SD car playback d
WIFI
WiFi receiver mode


Produktspezifikationen

Marke: Adastra
Kategorie: Hi-Fi-Anlage
Modell: S260-WIFI

Brauchst du Hilfe?

Wenn Sie Hilfe mit Adastra S260-WIFI benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Hi-Fi-Anlage Adastra

Bedienungsanleitung Hi-Fi-Anlage

Neueste Bedienungsanleitung für -Kategorien-