Adastra DM40 Bedienungsanleitung

Adastra Mischer DM40

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Adastra DM40 (8 Seiten) in der Kategorie Mischer. Dieser Bedienungsanleitung war für 62 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/8

DM25, DM40

Compact 100V mixer-amplifiers

Item ref: 953.108UK, 953.109 UK

User Manual

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

DM series mixer-amplifiers User Manual

Introduction

Thank you for choosing an Adastra DM-series mixer-amplifier as part of your public address system. This unit is designed to offer high

quality, dependable service for mobile and installed systems.

Please read this manual to gain the best results from your product and avoid damage through misuse.

SAFETY SYMBOL AND MESSAGE CONVENTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVIS

RISQUE DE CHOC ELECTRIQUE NE PAS

OUVRIR

This symbol indicates that dangerous voltage constituting a risk of electric shock is

present within this unit

This symbol indicates that there are important operating and maintenance instructions in

the literature accompanying this unit.

SAFETY NOTICE

1. Prior to use, read through this manual

2. Keep the manual in good condition

3. Pay attention to safety warnings

4. Observe all operating requirements

5. Do not use the device near water or wet areas

6. For cleaning, only use a lint-free, dry cloth

7. Install according to the specifications

8. Place away from heat sources or heating appliances

9. Use mains lead provided and avoid damage to cable or connectors

10. Unplug power from mains during stormy weather or if unused for long periods

11. In case of malfunction, water ingress or other damage, consult qualified service personnel

12. Do not place in damp areas or near liquids or moisture. Do not spill liquids on the housing

13. Please pay attention to warning symbols during transit and placement

14. Terminals marked with the symbol are HAZARDOUS LIVE and should only be connected by qualified personnel

15. Ensure that the apparatus is connected to a mains socket with a protective EARTH connection

16. Ensure correct operation of the mains switch

Warning

To prevent the risk of fire or electric shock, do not expose any components to rain or moisture.

If liquids are spilled on the casing, stop using immediately, allow unit to dry out and have checked by qualified personnel before

further use. Avoid impact, extreme pressure or heavy vibration to the case

No user serviceable parts inside Do not open the case refer all servicing to qualified service personnel. – –

Safety

• Check for correct mains voltage and condition of IEC lead before connecting to power outlet

• Use double insulated speaker wire with adequate current rating for 100V speaker connections

• Do not use 4- and 100V terminals at the same time 16Ω

• Do not connect 8Ω speakers to the 100V terminal or 100V speakers to the 8Ω terminal

• Do not allow any foreign objects to enter the case or through the ventilation grilles

Placement

• Keep out of direct sunlight and away from heat sources

• Keep away from damp or dusty environments

• For rack-mounting, use an appropriate shelf unit (e.g. 853.055UK) and ensure adequate support

• Ensure adequate air-flow and do not cover cooling vents at the front and rear of the amplifier

• Ensure adequate access to controls and connections

Cleaning

• Use a soft cloth with a neutral detergent to clean the casing as required

• Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups

• Do not use strong solvents for cleaning the unit

DM series mixer-amplifiers User Manual

Front panel

Rear panel

Connection and setup

Connect the rear IEC inlet (17) to the mains using the supplied mains lead (or an equivalent

approved type). Ensure that the mains voltage is correct and that the mains outlet is switched on.

Connect any line level audio inputs to the Aux input (12) on the rear panel using RCA leads.

Connect a microphone (if required) to the front panel jack input (10).

Further amplifiers can be connected from the rear Out RCA sockets (11).

The DM series amplifiers can be used either with 100V line or standard low impedance speakers.

These 2 configurations cannot be used together, so it is important to decide which method will be

used at the start.

Speaker connections are provided as spring terminals on the rear panel (13, 14, 15)

Wiring is described for each type of speaker system on the following page.

Next to the speaker connections is a spring terminal for FM Antenna (16)

This should be connected to the core of an antenna cable for good FM radio reception (if required)

NOTE: Do not connect a speaker output to the antenna by mistake. This may carry high voltage.

Power on/off switch

Media player display

USB media port

Media player mode & transport controls

Treble EQ

Bass EQ

Media player level

Auxiliary input level

Microphone level

10.

Microphone input jack

11.

Aux output connectors (RCA)

12.

Aux input connectors (RCA)

13.

COM speaker terminal

14.

4- 16Ω speaker terminal

15.

100V speaker terminal

16.

FM antenna connection

17.

IEC mains inlet & fuse holder

Produktspezifikationen

Marke:	Adastra
Kategorie:	Mischer
Modell:	DM40
Bluetooth:	Ja
Bluetooth-Version:	2.1
Kopfhörer-Anschluss:	6,3 mm
Breite:	280 mm
Tiefe:	205 mm
Gewicht:	1340 g
Produktfarbe:	Schwarz
Höhe:	67 mm
AC Eingangsspannung:	230 V
AC Eingangsfrequenz:	50 Hz
AUX-Eingang:	Ja
Anzahl USB 2.0 Anschlüsse:	1
Stromverbrauch (Standardbetrieb):	- W
Betriebsanleitung:	Ja
Anzahl Kanäle:	- Kanäle
Synchronisations-Eingangsimpedanz:	4 Ohm
Line-Eingänge (RCA):	2
Anzahl der Mikrofoneingänge:	1