Adastra BC5A Bedienungsanleitung

Adastra Lautsprecher BC5A

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Adastra BC5A (4 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
BC5A
ACTIVE STEREO SPEAKER SET
Order ref: 170.165 , 170.166 UK UK
User Manual
• Active + satellite stereo pair
• Supplied with adjustable wall brackets
• Supplied with satellite link cable
• RCA or 3.5mm stereo inputs
Version 1.1
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
BC5A User Manual
Introduction
Thank you for choosing the BC-series active speaker set. Please read this manual prior to use to avoid
damage to the item. ese compact, self-contained stereo speaker sets are designed to deliver high quality Th
near-field or perimeter coverage for various monitoring and installed sound applications.
Contents
Please take care when unpacking this product. Inspect for any damage and ensure you have the following
components…
• BC-series active speaker with built-in amplifier
• BC-series passive satellite speaker
• 2 x wall-mounting brackets with screw caps
• Satellite speaker wire modular connector –
• Mains lead(s)
Safety Conventions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE NE
PAS OUVRIR
This symbol indicates that dangerous voltage constituting a risk of electric shock is
present within this unit
This symbol indicates that there are important operating and maintenance instructions
in the literature accompanying this unit.
Warning
To prevent the risk of fire or electric shock, do not expose this appliance to rain or moisture.
To prevent electric shock do not remove the rear cover.
No user serviceable parts inside. Refer servicing to qualified service personnel.
Safety
• Prior to connecting the dc adaptor to mains, ensure that the supply voltage is correct.
• Avoid ingress of water or particles into the enclosure.
Placement
• Keep the unit out of direct sunlight and away from heat sources.
• Keep the unit away from moisture or dusty environments.
• Allow adequate space for cooling at the rear of the active speaker unit
Cleaning
Use a soft cloth with a neutral detergent to clean the cabinet, panel and controls. Do not use solvents.
BC5A User Manual
Panel layout
Setting up
For near-field or desktop use, space speakers apart for adequate stereo separation depending on
proximity to the listener. For installations using the supplied wall-mount brackets, attach the brackets
to a solid surface using fixings which are sufficient to hold the weight of the active speaker. Take
care to mount the active unit close enough to a mains outlet for the supplied adaptor to reach.
Fix the speaker units to the brackets at top and bottom using the supplied screw caps. Each can be
rotated to aim the general direction of sound output.
Note: Do not over-tighten the screw caps as this can cause the threaded inserts to fail.
If the speakers are mounted at height or where falling objects may be hazardous, it is advised to
attach a secondary means of support (e.g. drop-wire or chain)
Operation
Link the powered speaker to the satellite using the supplied modular connector speaker lead (5)
With the rotary VOLUME (4) control set to minimum and TREBLE and BASS controls set to the
vertical (12 o’clock) position, connect the supplied mains lead to the rear of the active unit (2) and
plug into a suitable mains outlet. Connect the source signal into the active unit via either L+R RCA
connectors or 3.5mm stereo jack input (8, 9) Switch the power on (3) and gradually turn the rotary .
VOLUME control clockwise and increase volume level to the required amount.
The stereo/mono switch (6) offers mono output for both speakers if required. Stereo is default.
Adjust TREBLE (7) and BASS (10) controls to provide the desired tonal response.
The centre position is unaffected, to the left is cut and to the right is boost.
Turn down rotary VOLUME control before switching off.
1
Fuse holder
2
Mains inlet (Fig.8)
3
Power on/off switch
4
Rotary VOLUME control
5
Satellite speaker output
6
Stereo/mono switch
7
Rotary TREBLE tone control
8
3.5mm stereo line input
9
L+R RCA line input
10
Rotary BASS tone control

Produktspezifikationen

Marke: Adastra
Kategorie: Lautsprecher
Modell: BC5A

Brauchst du Hilfe?

Wenn Sie Hilfe mit Adastra BC5A benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher Adastra

Adastra

Adastra WA-215 Bedienungsanleitung

16 August 2024
Adastra

Adastra F40V Bedienungsanleitung

16 August 2024
Adastra

Adastra 952.613UK Bedienungsanleitung

15 August 2024
Adastra

Adastra 952.615UK Bedienungsanleitung

15 August 2024
Adastra

Adastra 952.612UK Bedienungsanleitung

13 August 2024
Adastra

Adastra FSV-B Bedienungsanleitung

13 August 2024
Adastra

Adastra AH25 Bedienungsanleitung

13 August 2024
Adastra

Adastra 952.618UK Bedienungsanleitung

13 August 2024
Adastra

Adastra BC6V Bedienungsanleitung

13 August 2024
Adastra

Adastra BH4 Bedienungsanleitung

13 August 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024