ACTi PMAX-1105 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr ACTi PMAX-1105 (25 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/25
Indoor Zoom Box
Mounting the Wall on
using an Indoor Bracket
Installation Guide
For Models:
B2x, I2x
2014/11/11
www.acti.com
Installation Guide
2
Table of Contents
Before Installation 3...................................................
Connecting a Power Adapter (Optional) .................................................. 3
Connecting the DI/DO and Audio Devices (Optional) ............................. 5
How to Connect DI/DO Devices .............................................................. 5
How to Connect Audio Devices ............................................................... 8
Connecting a Serial Device (Optional) ..................................................... 9
Indoor Installation Procedures ............................ 11
Step 1: Mount the Indoor Bracket ........................................................... 11
Step 2: Attach the Camera to the Bracket ............................................. 12
Step 3: Connect the Cable(s) .................................................................. 14
Step 4: Access the Camera Live View .................................................... 15
Other Accessories ................................................ 16
How to Install / Remove the Memory Card ............................................ 16
How to Insert the Memory Card ............................................................ 16
How to Remove the Memory Card ........................................................ 16
Accessing the Camera ......................................... 17
Congure the IP Addresses .................................................................... 17
Access the Camera .................................................................................. 21
Safety Information ................................................ 23
www.acti.com
Installation Guide
3
Before Installation
This section describes the procedures in preparing the external devices that you can connect to
the camera. The camera supports DC12V power input, Digital Input and Output (DI/DO), Audio
Input and Output devices, as well as Serial Devices like a Pan-Tilt (PT) Scanner using the
bundled terminal blocks. The use of these devices, however, is optional.
Connecting a Power Adapter (Optional)
In case of using a non-PoE switch or your PoE switch has limited power supply, you can
purchase a power adapter and directly connect the camera to a power outlet. The power adapter
must be connected to the supplied terminal block before use.
To do this, follow the procedures below:
1. Loosen the screws of the and pins of the power terminal block. 12V GND
2. Take note that a standard power adapter cable has two (2) dierent wires:
White stripe: Connects 12V Pin to
Connects to GND Pin


Produktspezifikationen

Marke: ACTi
Kategorie: Nicht kategorisiert
Modell: PMAX-1105

Brauchst du Hilfe?

Wenn Sie Hilfe mit ACTi PMAX-1105 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert ACTi

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-